Accord :: 90 Honda - Tail / License Plate And All Marker Lights Won't Go On
Dec 28, 2004
I have a 90 Honda Accord and can't figure out why the lights aren't working. I have no computer codes and all the fuses are good. The headlights, brake, turn signal lights, hazards and interior lights work fine but the tail lights, license plate lights, and all marker lights won't go on. I only noticed by a chance walk around on the car. I've checked every fuse inside and outside fuse panels. The hazards and brake lights going on makes me think that it can't be a ground problem.
I have spent a lot of time trying different things and checking wires andd fuses and can't find any problems. Is there a relay or something for the marker lights?
View 14 Replies
Advertisement
So my tail lights and license plate lights are not working. The head lights work also my gauge cluster lights are not working. Which fuse I should check. Or what it might be?
View 6 Replies
I'm having some sort of electrical malfunction on the back of my Mk4 Gti. The right rear tail light, license plate light and back windshield wiper doesn't work. I replaced the bulbs several times and they keep blowing.
View 2 Replies
No tail, turn, backup, flasher, license plate - NOTHING. i checked fuses - cleaned both connectors under the truck by drivers door, cleaned connectors by the spare tire (2) one large one and one small round, the cleaned ground lug on top of spare tire bracket, all bulbs are new. cleaned with LPS contact cleaner, they were new and shiny and reinstalled. NOW - turn is very weak and when i push on brake they go off and the front blinkers blink twice as fast? I a aircraft technician and know my way with an ohm meter but totally stumped.
View 8 Replies
What the heck caused this? Something melted through the license plate holder, then through the plastic of the bumper, down to the metal body. A week ago I had the timing belt, plugs and water pump replaced by my mechanic here in Orlando. I didn't notice anything when I picked it up but I didn't really do a visual inspection of the front of the car either since it was parked facing a fence when I picked it up. Since then it has been driven by my wife to work 3 times. While there, she parks against and facing her building with only a row of shrubs in front of her. And at home it's parked in our garage with about a distance of 3 feet from the washing machine. I asked at my repair shop and they said they had no idea what could have caused this other than a diesel truck, however there is no residue typical of a diesel exhaust.
View 19 Replies
So I bought LED license plate lights, the same ones Track5tar has (who sent me the link to get them). I got em off the bay, and I put them in and they don't work! The Heatsink gets hot but the lights don't light up in both of them!
View 24 Replies
So I was replacing the lights with the new leds change one toke some pics to compare. Everything fine...
Removed the other feston put the new led and they won't turn on anymore..
Change them back. Put them upside down, up, sideways... Nothing
Check all three fuse boxes all ok
Every other light on, inside trunk on, side markers on...
Everything but the license plate lights.
View 12 Replies
Bulbs are fine, I turned the light switch from off to on (12 o'clock position) and they flicker for a split second. What can be wrong? I checked the harness on the rear hatch and it looks fine. Maybe the switch itself?
View 2 Replies
We found out that both our tail lights and our left turn signal light were out. The guy at the Honda place said that he thought that the person who put the hitch on our brand new car screwed something up. He said that 3 bulbs were burned out as well as 2 fuses. He replaced the bulbs and fuses and everything has been working. We pulled our light weight trailer about 4 times before the car was inspected. The car passed inspection. Then this problem showed up about a month later after we had pulled the trailer once or twice more. I'm afraid if I take it back to the guy who put the hitch on, he will just say that he did it right. Why didn't the fuses protect the bulbs from burning out? Could the problem be that water got into the hitch wiring. We wrapped the end of the wires in plastic but noticed water got into the area anyway. Why didn't the problem show up right away? Could the problem show up again even if we don't pull the trailer. What should I do next.
View 3 Replies
For a few weeks now I noticed my stock license plate bulbs started to act strange. My left one is about half burned out, and the right one started to flicker and burned out entirely.
So.. Easy fix right? I bought 4-smd led lights to replace the burnt out ones and as soon as I installed them they worked perfectly! But about twenty minutes later .. The right one burned out. And the left one is dim.
Is there something wrong with the wire? what can I do?
View 6 Replies
I have a Ford Windstar 1999 . My license plate lights are both out. I remove the inside panel of the back door, there is a connector between the license lamps and the rest of the car electrical system. I disconnect it. I go turn on the lamps at the dash board, I then reconnect the connector to the license plate lamps at the rear door… and they work! I go back to the dash and switch the lamps (controls side +rear lamps and license) OFF and then immediately back ON, and the license plate lamps stay OUT. All the others lamps on the fuse circuit work fine. When lamps are lit, shaking the wiring harness has no effect. What is happening and where? This is very strange!
View 4 Replies
Where the license plate lights get thir power from? I have a 2002 SC430 and the plug is just dangling. It goes behind the plate and then if I look under the car, it is just there by the bumper and I cannot find a connector that it can reach.
View 3 Replies
One of my license plate lights doesn't turn on until I tap it..
What could be causing this? I installed LED's in them but a few months later I noticed this happening.
View 7 Replies
I try to install LEDS on it and I guess I accidently blew the fuse and when I try to search for it, I can't locate it.
View 3 Replies
Was installing led license plate lights and they turned on for a second then shut off, I began trying to switch them around and do whatever I could but still wouldn't light up even put the stock ones in again and they wouldn't work.
View 8 Replies
My Pathfinder has the license palate in the middle/center of the hatchback door, with one light on the left and one on the right. I cannot figure out how to change the bulbs and my manual is no dice; it shows the process for a different location of the plate on the door, maybe a different version of my year model.
View 6 Replies
The marker lights and tail lights are suppose to go off when you turn off the car. Unfortunately mine are staying on and the only why to get them to turn off is disconnecting the battery.
View 1 Replies
I am planning on adding fog lights to my Corolla 2011 LE.
I am considering this one ....
and these LEDs for my license plate ....
View 1 Replies
I was just washing my 2016 superduty that just turned 3000mi and noticed the light housings and plastic are broken on the license plate lights. The one just fell apart in my hand. 55k and this happens at 3000mi.
View 9 Replies
This issue came on suddenly. I unplugged the license plate lights- fuse still blew. I don't know where the wire harness is for this group of wires going to these lights to check for frayed or melted wires. I don't see any damage any where. I am severely limited for funds for a mechanic so I need to try and figure this out first myself. Looking for pictures of how I can traces the wires through the car?
View 1 Replies
How to change license plate bulbs? The little clear covers dont seem to pop off ........
View 3 Replies
