Camry :: 2007 - TPMS Sensor Won't Reset
Jul 8, 2015
My friend bought two new tires for her car, and had all the wheels rotated. When she went to the toyota, they said they need $100 bucks, just to reset my TPMS sensor.. which is something so simple. There are few videos on YouTube that details how to reset the TPMS sensor...
So I followed all the steps. I bought a tire pressure sensor (*a nice digital one), I put air in the tires (30 on all 4), i put the car ignition on ON, put the parking brakes on, and pressed the TPMS switch, saw the three blinks,.. and I thought it would stop coming after that... But Nope. It started right back on and started blinking.
Now I am not sure what to do? Car is a 2007 Camry.
View 8 Replies
Advertisement
2010 Camry 4 cylinder XLE. Manual, page 385, shows reset button at glove compartment. It is not there. I'm guessing it's under the dash somewhere, where only a contortionist can see or get to it.
View 6 Replies
We just purchased a 2007 Santa Fe Limited with the 3.3 V6 and AWD. It was in remarkable shape with 137k on the clock and everything appears to be in working order. Our only complaint is the TPMS light. This light seems to have a mind of its own. All tires are inflated properly and it's not really that cold here on Long Island these past few weeks, but the TPMS light comes on every now and then.
The first time it came on, my wife was driving on a bridge that had construction going on. It went off by itself a few minutes later. The light came on again the next time she passed the same spot and again it went off on its own. I've been reading about RF interference with the sensors and I think this is what is happening on the bridge.
Saturday we passed a fire house and the light came on again. We parked across the street and came back after 2 hours to find the light still on and remained on for the ride home and still on the next day. We had the Bluetooth adapter plugged into the cigarette lighter the whole time as we were using Pandora thru the factory radio. As a goof just to see what would happen, I removed the adapter from the plug and the TPMS light went off a couple of minutes later. I've used the adapter before and it was fine. Could it be it was interfering with TPMS once the system was tripped by the EMI?
How common is this and is there any way to diagnosis this with a scan tool, etc?
View 7 Replies
2009 Lexus ES ... Just put my summer tires/wheels back on and how do I make the low tire pressure light to go off? These wheels have sensors that were registered at the dealer when purchased ... Do I have reset the system by deflating to the trigger point or should the computer remember the data from last fall when I took them off?
View 16 Replies
My 2007 Prius has a stubborn TPMS light. This started about a week and a half ago after I made a few trips from my house which sold to my new apartment. I had the car loaded up with stuff in each of the four trips and maybe had a lot of weight.
I checked the tire pressure after the 3rd trip and it looked fine on all of them. I set them to 35 psi and made one more trip with heavy-ish stuff. I did not check the tire pressure after that last trip but I tried resetting the TPMS light.
I press my foot on the brake pedal and hit the power button twice and then I held the Set button until I saw the TPMS pattern change to three blinks and then it stops. It then continues blinking for the 1 minute duration and stays solid. I tried this a couple of times and waited 3 minutes or so after doing it to see if it made any difference.
Am I likely not trying to reset correctly? I also have techstream on a cd and the tool and a laptop but am not sure if I should set that up and then try to debug using that tool?
View 11 Replies
I can't find the button to reset the TPMS light on my dash. It's not even in the glove compartment.
View 7 Replies
A customer brought in their 07 Camry XLE with a flashing low tire light. I retrieved two codes, one for sensor 1 and one for sensor 2. Tire pressures normal.
Codes are
DTC C2121/21 No Signal from Transmitter ID1 in Main Mode
DTC C2122/22 No Signal from Transmitter ID2 in Main Mode
The other things I noticed were that the two bad sensors were showing a temp of -40F while the two good sensors were within 5 degrees of actual ambient temp. Another fault was that the battery in #4 was low. I ordered 2 new sensors from Toyota and after writing down their code, I swapped them out. I had already written down the codes for the other 2 sensors. Going into the data, now sensor #4 is reading -40F too and the battery says OVER.
The only good one is on the left front. I cannot believe that I had two bad sensors this morning and another failed this afternoon. I've been wrenching long enough to know that these things are rare. The customer made the appointment yesterday and dropped off the car last night. She called right when the light came on and only drove it about 30 miles from then to when she dropped it off. Before I left, I ordered two more sensors. BTW, the tires look relatively new, but we did not put them on. The two sensors I removed looked fine.
View 2 Replies
I have been having countless warnings of check tire pressure, 'defective wheel on board'... I had one of the sensors changed before this but had the car packed for a while.. Now this warning keep coming.. My mechanic says I should check my pressure bring it up to spec and reset the monitor.. How do i do this reset got an 04' touareg...
View 1 Replies
No luck using the search option. Can I reset (get the faulty wheel onboard light to turn off ) the system myself through the learn sequence? Haven't been able to achieve that result yet.
View 4 Replies
TPMS light comes on. Properly inflated all four tires, then attempted to reset the TPMS system. The procedure says to hold the button until the light blinks three times. Having done this in the past, I know that the light should stop blinking when the reset button is released. Now, the light continues to blink after releasing the reset button. When in regular drive mode, the button is continuously on.
View 2 Replies
Got my OZ wheels on, with a new set of TPMS sensors. The old sensors stayed with the OEM wheels for winter tires. How do I reset the system to recognize the new sensors? I have a VAG-COM kit, is this required or is there a method to do this through the MFD?
View 2 Replies
Wife picked up this basic model for my daily driving to work. It does not have MFD or compass but a simple display menu. Recently I encounter some trouble on tire pressure and TPMS triggered. I was told to reset it by myself. Unfortunately, mine is basic S model and there is no MFD or reset button in glove box. Manual said using MFD. Any way to reset without going to dealership on Tiguan S model?
View 4 Replies
Switched my wheels at Discount Tires/America's Tires and for some reason my TPMS warning light won't go away. It's been more than 24hrs and I've driven over 100 miles, even put the tires to 42psi but still the warning light won't go away. The shop did rebuilt the TPMS due to the wheel change but it's nothing out of the ordinary so I am not sure what's going on here.
View 2 Replies
I have had my 07 now for a few months. The other day during a trip, I noticed my TPMS light began to blink, and then stayed constantly on. I checked my pressures at the end of the day and they were all right where they should be, including the spare. When I start the car, the TPMS light will blink for some time, and then it will go steady and stay illuminated.
Took the car to a tire shop and they hooked the tpms scan tool up to the car and told me I had a bad sensor. I did some reading online today and it seems like a lot of people say the sensors that come from the factory for these cars only last for about 5 years until the internal battery dies.
For what it costs to get one sensor replaced, knowing that the car is 5 years old and the other 3 sensors are prone to fail, I see some people are making little PVC canisters and putting all 4 sensors in the canister and pressurizing it to make the light go away. But my sensors are broke, and if I bought new ones I do not have a tool to program them.
Is there anything that can be unplugged, or a wire that can be cut or grounded to make this stupid, pointless light go away or am I pretty much at the mercy of the tire shop/dealer to replace the sensor and make the light go away?
View 14 Replies
Just had a flat tire. Was in a construction zone on an interstate so had to drive on the flat for a half a mile to get to a pullover spot. Had tires replaced at a Sears auto (only place open). But now can't reset the light on the dash. One thread said to push the reset button under the steering column while starting the car, but that doesn't work.
View 1 Replies
My tire monitor pressure light comes on and stays on. I've tried to reset it no luck...
View 3 Replies
First cold day of the year today and naturally my TPMS light came on. Checked the pressures with my own gauge, all at 34 psi. Inflated them all to 38psi and the TPMS light is still on. Drove a little ways - still on. Checked pressures again - still 38psi. I had this happen once before in mid-winter two years ago and I can't remember what I had to do to reset the TPMS light. Mine isn't one of the ABS/ESP systems so I don't have a reset button - I need to do something with the VAGCOM but I don't recall what.
What's weird is that the TPMS threshold should be 7psi per wheel shouldn't it? And my light came on when it was only 4psi down. Is there somewhere I can check and find out what the ECU thinks the threshold is - again with my VAGCOM?
2010 Tiguan 4MO
View 2 Replies
I just picked up my 2015 Gx460 last month. The TPMS light stays on after I changed the snow tires. where the reset button for TPMS is located?
View 14 Replies
I have a bad sensor in a tire that just had a flat. I have ordered the sensor for the wheel and I am wondering after I install the sensor in the tire will the 'reader' pick it up and reset itself or do I need to go through the programming of the new sensor? At this time the TPMS warning light comes on and flashes for a minute or so before staying on constantly. This tells me it's trying to read the tire sensors but there is a fault, which is the tire sensor where I just had the flat. Costco tells me that sensor reads 78psi, which is incorrect. The fact that the reader is trying to read all the sensors and getting an error makes me think that it might reset itself when the new sensor transmitter is put in the tire? Any chance of this resetting itself or will I need to reprogram the receiver unit?
View 12 Replies
A few months ago my TPMS light on my 2012 C2 came on. I adjusted tire pressures and it soon went off again. A week ago it came back on. Again I adjusted pressures, but this time the light is staying on. I rechecked the pressures and all looks good. I tried the reset procedure in the manual to no avail. So what now? Just live with the light being on all the time?
View 8 Replies
My TPMS control module stop,working after resetting it.. Is there a way to fix it or do I need to buy a new unit.
View 2 Replies
