Using alarm or turning off head lights my running lights will not turn off. I am thinking it has something to do with alarm. I unplugged headligths and dimmer switch and still stays on. Where the relay is or the alarm box is located its on a 2006 F250 4X4....
View 7 Replies2012 F-250. As said, when I open the doors the parking lights come on. How can I disable this? Likewise can I disable the interior lights coming on when I remove the key but do not open door?
View 12 RepliesI'm having problems with my front marker lights. The turn signals work but when I turn on the parking lights or headlights they don't work. They only work with the turn signals. And I can't get the front side marker lights to come on. I've tried everything...
View 2 RepliesI have a 2006 F350 CCLB FX4. Is there a way to allow the running/parking lights to come on when I open the door like my dad's 2012? I don't have any roof/clearance lights yet, I'm a little on the fence about drilling holes in my roof but it seems the truck should have them, especially being an F350.
View 14 RepliesI was wondering if there was a DIY mod so I can have my foglights on with my parking lights and my high beams..
View 7 RepliesMy sons 2006 F350 brake lights and rear turn signals quit working. When the headlights are on, all the lights operate but the rear turn signals and brake lights do not nor do the emergency flashers. The front signals work but flash very rapidly. Although I'm not an auto electrician, I'm fairly mechanically inclined but the fact that the front signals work, the rear don't and all lights work as lights, just not as turn signals or brake lights.
View 4 RepliesI have a 2006 F250 Superduty 4x4 that the brake lights hazards and turn signals have stopped working in the rear.. The middle cab brake light does not work either.. The running lights do work as well as the turn signal and all lights in the front.. I also checked the trailer plugs and both work for running brake and signal lights.. I have checked all fuses under the hood as well under the dash with a test light and i have nothing blown.. I have replaced the Brake switch as well as the flasher module under the dash and picked up a new multifunction switch (Turn signal/hazard) and that didn't work either.. I'm stumped at this point.. I have not checked the bulbs yet but wouldn't think they would all blow at the same time.. (will do this next)..
View 3 Repliesall lights work except parking lights/tail lights. have blue lights under trk had to cut wire by COPS when got dark had no tail light cut wire had shorted taped off changed fuse 15 amp slot 30 10 amp slot 40 still no tail lights. Is their a relay or module before fuse box or after or what could be wrong
View 4 RepliesNew to me 2012 F550 parking lights will not go off. Battery disconnected now. Touch battery cable parking lights come on.
View 14 RepliesWhen I hook a trailer to my '04 F-250 the parking lights stay on. The lights on the truck are not on. I pulled the fuse for the towing lights and they will go out. Pulled what I believe to be the relay according to the owners manual and they still stay on. I have to unplug the trailer every time I stop for any period of time.
View 3 RepliesMy 2011 F250 has no front or rear running lights working, mirror side marker lights not working and fog lights not working. I have checked all fuses including 30amp trailer light fuse and they are good. The fuses in the passenger kick panel are not getting energized.
I replaced the switch with a friends from same truck and no luck there. The headlights, dash lights and turn signals work fine. Here's the kicker, when I back feed 12V to the yellow/blue wire at front running light it turns them all on, including mirror lights. I've switched out relays in the box under hood and that didn't work.
When I pull the switch on dash to turn on the fog lights the indicator in the switch doesn't work either, they are both listed on the same fuse but as I said, the fuses have continuity across the blades but when I test the socket there is no voltage going to them. I have not connected a trailer to see if those are out yet but will do today.
2000 F-250 Super Duty
I was replacing my headlights, which required me to splice in their lights to my parking lights, and I seem to have shutdown ALL my parking lights. I did a test after twisting my wires together and everything worked fine. Then I soldered and heat shrunk them and somewhere during that process I lost all the parking lights.
I checked the 8th fuse as per the manual (for Parking Lamps) with a multimeter and it checked out just fine.
Figured it was the time to ask the experts on here where I should go from here. Are there some other fuses I could be missing, or maybe some else I could do?
Solved: Bad fuse in the #8 slot in the Power Distribution Box (under the hood, near Cab, driver's side)...
I have a 2002 f250 SD v10 4x4. I had a ground wire break fixed that know noon of my instruments work. Dash lights up but nothing moves. Pulse my parking lights stay on when the truck is shut off or when I turn lights on then off. I have to disconnect the battery to get hem to shut off.
View 3 RepliesAre the parking brakes on rear disks adjustable at all? Mine doesn't hold very well anymore, but I'm not quite ready to rebuild the whole thing. If there are adjusters (similar to drums), which way you turn them on which side of the truck?
View 6 Replies2013 F250 XL with factory towing package.
My camper and boat trailer do not have turning signal or brake lights when plugged into the round seven pin trailer connector. I have tried both the connector in the bed and under the bumper. I've also connected the trailers to other trucks and the lights work fine so I know the problem is in my truck.
Yesterday I was on a pretty long trip and stopped off the interstate to grab some food. My truck is really loud so I always shut my engine off at the drive-thru. When I went to crack it back up everything lit up but when I turned the key nothing happened. I had the truck towed home and I put a new starter on it. Still nothing.....
Well after further investigating where the positive wire that comes from the starter to the battery was broken at the battery post. Don't know how the heck that happened but I fixed it back to factory condition but still nothing. I'm at a complete loss. I checked all fuses and everything looks good.
When I turn the key everything lights up, then turn to crank it and nothing but a slight sound coming from those square silver things in the fuse panel under the steering wheel.
2007 f250 PSD with to many extras to list
I just bought my 2016 super duty about 2 months ago, really liking it, got a couple questions- How do I turn off daylight running lights? When head lights are on, instrument cluster lights come off and on according to outside light levels, can I turn off this feature?
View 1 RepliesI can't find any where in the owners manual on how to get the lights to turn off after the doors shut with the engine off. They stay on for a good minute after I shut the doors.
View 14 RepliesI have no 4x4 lights on in cluster when turn the key in the on position and it doesn't engage when I turn my 4x4 selector. And I don't hear anything in the relays .
View 14 RepliesI'm not just reposting it though. I went ahead and sprayed all of the door switches with WD-40 multiple times, and the interior cab lights still come on. So, I'm assuming one of the switches in the doors is bad. Only thing is, I don't know how to figure out which door has a bad switch. Any way I could check this? Or it may be something other than a bad switch. It's annoying not having any interior lights (I took them all out to keep the battery from running down).
View 6 RepliesI have a f 550 that blew out starter cyl on inner fender.and starter, replaced both. Now I have no brake lights or 4 ways and no turn signals....
View 4 Replies