I have a problem in my lexus ls460 Yesterday I was driving (its was raining) and suddenly 5 lights appeared in the dash board and a messages says : check abs vsc brake system.. stop the car in a safe place and contact a dealer ..
View 14 RepliesI drove the car yesterday night for about 30 mins and parked it at home and after one hour went back to start the car but it wont start. All the lights working fine it gave me an error saying check VSC system and whenever i start the car it gives me sound zzzzzzzzzzzzzzzzz and ends with a fan sound but wont start ...
View 14 RepliesYesterday I got a maintenance code on the dash of my 07 ls460 and it said to check parking brake system please take vehicle to dealer.
View 5 RepliesI have Lexus 460 LS L 2007. Few months back changed the battery and every thing was ok. 2 months after I had problem in the sound system ( radio and dvd ) which was on and off. One month back suddenly I had all the warning lights in the dashboard on with massage saying that that the brake system is malfunctioning and check the ABS system.
I took the car to LEXUS dealer and they reprogrammed the computer abd then every thing went back to normal and the problem fixed. Two days after I had these warning lights again with the same massege. I do not know what to do ??
I recently purchased a beautiful 07 LS460 with 24K miles about 3 weeks ago.
About 2 weeks ago, I noticed a loud clicking / hammer noise from the dashboard lasting about 15- 20 seconds and after reviewing numerous threads here, I realized it could be my blender door / damper due to the infamous cabin air filter change. .
It must be noted that the Dealer did not change the cabin air filter and when I looked inside my glove box, I could easily open / close the blender door using the recirc ac button. Additionally, my cooling and fan is working fine as well, so I am not too sure that this is a blender door issue.
My question is that the noise continues to happen for about 20 seconds when the car is started and shut off. Since my blender door / damper opens and closes smoothly, is the servo motor going bad or servo sub assembly?
If it is my servo motor, could it be possible that it was damaged when the cabin filter was replaced? With the car only bearing 24K miles, I cant believe my servo motor has already gone bad!
1. I think my battery is getting weak.... when i cranked it, it didnt sound strong and the original battery eye says to add distilled water. I am thinking about getting a replacement battery at Costco.
2. so right after it started, the message of "Check Brake System" shows up. Tried to restart but no go. Drove about 15 miles and all seems fine but message is still there.
* is it OK to replace with a Costco brand battery (they have a great returns policy) and is there anything i need to do before or after replacement?
* could the Check Brake System be due to the weak battery? How can I reset it?
* Anything else that can cause this error message?
Started the car this morning- and got a message. "Check parking brake system" .
The Auto button for the parking brake seems to flicker, and the park light on the dash blinks. Car make ding sound while driving.
2008 LS460
I have ls 460 my rear seat entertainment is not working. i can't open the rear screen and when i hit Display button in left of the navigation screen there is no " rear " word that open the rear screen.
View 8 RepliesRecently the battery in our 2009 LS460 died. After installing a new battery my wife (her car) started the car and noticed that the emergency brake was set, but she selected a dealer service option on the dash display and the brake problem was solved. Almost. When she backed it up a couple of feet and pressed on the brake pedal, there was a metallic sound like the disk pads were loose in the calipers. Since this concerned my wife and since it was time for the 55K service, we took it to our local Lexus Dealer. Two days later, we got a call to tell us that the tires were worn to 3/32 tread, so we let them replace the tires.
When we got the car back, the navigation system didn't know where the car was. After reading the owners manual, we discovered that there is a navigation system procedure to update tire changes... the dealer had not done it. We also discovered a navigation system procedure to update battery changes... At the time I installed the new battery, I hadn't done it, so a couple of days late I did it.
The car still doesn't know where it is... most of the time. Some of the time though... it apparently does... for about 30 minutes or 15 miles at a time. The GPS icon randomly appears and disappears.
The latest from the dealer is that we may need a map data upgrade for $300, but I think it's a bad antenna connection.
My NAV/Radio system won't function at all. When I turn on the car the first thing I get is the "splash screen" (and advertisement from Jim Falk Lexus), then the warning screen. Radio would come on for a few seconds then the screen will turn black and start all over again. It's in a continuous loop.
When I hold down the volume button for 4-5 seconds, it will re-boot but it will then continue to re-boot itself every few seconds. So is there any way to totally re-set the system? You know, like a "control-alt-delete" to start over from scratch?
I have an appointment on Friday and really don't want to be looking at the system go through this cycle every 5 seconds. It's very distracting. Plus I can't use my NAV, the radio, Bluetooth for my phone, etc...
It's a 2015 LS460 with the Mark Levinson system.
My parking assist warning system has suddenly stopped working. (2007 LS460) I'm thinking I may have disabled it while pushing some other buttons or doing something else. I changed the distance to farthest but that didn't work. It was working perfectly last week. I did disable the auto down tilt on the steering wheel. Could this have also disable the parking assist?
View 10 RepliesYesterday after coming to a stop and pressing the start/stop button, the vehicle wouldn't turn off. Eventually I got it to turn off (by pressing the button).
After I got it to turn off, I pressed the start button and it does not turn on. I get a message saying "Check VSC" . 1 click from under the hood and that's it. All power is there. Radio/AC/etc all work. Not brand new, but the battery is fully charged.
Trying to diagnose and fix the issue myself before calling for a flatbed to come and pick it up.
I dont think its the starter since I've had issues turning it off. What it might be? Its an '07 with 65k miles.
I have had my new 450h for almost 7 months and do love this car. I took it in for its 6 month service, although apparently needn't have done so because we only have 1300 miles on it thus far. However, it checked out fine. Today whilst driving home from the local supermarket and we got a warning on the dashboard with the orange triangle saying to check BSM system. I had not done anything and am concerned why this should happen suddenly. I have called and will have to take the car to be checked. What happened?
View 3 RepliesAfter doing a Total Brake job on My 08 LS 460 plus Rotors. I got a warning message that my Parking Brake was inaccessible and to see the Dealer . I went back and changed all the Parking Brake Hardware to solve the Problem and I am still getting the same Warming Message.
View 14 RepliesMy RX350 2012/13 model AWD check system and slip indicator warning light are permanently ON on the dashboard. The car is driving normal. How to clear the indications because I am very uncomfortable with it.
View 1 RepliesCheck VSC and engine light on dashboard... I am confused what problem can be happened....
My car ES350 2008 ... NEW about 2000 miles ...
Just got a "Check hybrid system" message and the triangle of death is on my 2010 Prius -- but I can still drive it...
Toyota's Emergency Response Guide says this error is triggering by the ground fault monitor that is connected to the 12v aux battery.
HV battery pack ( HV battery fuse, two 12v relay)
HV battery inverter/converter
My 2010 Toyota Prius III has 37400 miles and I've had it since 2010 April.
My ScangaugeII didn't find any OBD2 diagnostic codes
I was driving my plug-in yesterday on the freeway and suddenly it alerted me the following:
Check Hybrid System
Stop the vehicle in a safe place
I pulled over to the side and tried to reset the message (push power button 3x), but message still was coming up. With my Toyota dealership not too far away, decided to bring in my car to have it checked out.
After 2 hours with their hybrid tech, they were not able to replicate the message (of course, always the case), but the tech was able to catch a P0C3E error from their diag tool. Being that they could not replicate the issue, they released my car and started to bring it back it the issue persist.
Went to start the car up this morning - foot on brake and pressed the Power button. The car went through its checks but when it finished the 'Welcome to Prius' graphic it did a continuous beeep and displayed 'Check Hybrid System' and didn't start.
I turned it off and tried again and on the third or fourth attempt the car eventually fired up, the error message was gone and there were no warning lights on the dash. The car did smell like it was running rich though.
I turned it off and called the dealers. They said if no warning lights are now on it should be ok to drive the 6 miles to see them and they'll check it on their computer. As I drove to see them the car was running OK but the fuel economy was shocking. I was getting about 40 mpg UK (30 US mpg) as a trip average.
2008 ls 460 won't start when I press brake and start engine button. Car battery is strong. Tried two different keys. Start engine button has green light and when push all dash lights come but engine does nothing. Tried holding Lexus emblem on key next to button and pressing unlock button on key several times. Nothing?
View 4 RepliesI have a 2013 Avalon V6 Limited.
On 5 or 6 occasions, during the 8 weeks I have owned it, a yellow warning light has appeared, together with a message on the Multifunction Display stating: "Check Blind Spot Monitoring System." While this is displayed, the BSM does not work. Turning the ignition off and then on again resolved the problem immediately each time, with one exception, when I had to do it twice. Pushing the On-Off button for the BSM on the left side of the dash did not resolve the problem.