My MIL light came on today for some reason. The owner's manual mentions it may be tied to an emissions problem. I just purchased this car a few months ago and had the oil changed two days ago for the first time. Could there be any connection? What are the most common reasons for the light coming on? I know with other types of cars, that light could mean one of many different things.
View 2 RepliesHad the oil changed today; before doing so, I saw that the check engine light had come on. Have been told by 3 professional car maintenance people that there is no connection between needing oil / oil change and check engine, that it would have been the check maintenance light.
Will take it in for diagnostic test by dealer. Also, was told by the oil change guy that he heard pinging which could mean that the car needs to have the valves adjusted, and that the check engine light is due to needing something or other with the gas tank filter which could have a leak/crack, etc.
I have a 07 Camry XLE. My previous battery started dying on me so I changed to an Optima Yellowtop battery. Next day the check engine light came on, and sometimes while idle the car starts stalling, it never turns off though just that the RPM goes really low and the acceleration is really slow and it feels like the car is having trouble accelerating. Today it happened again but I was over 60MPH and hitting the gas pedal and it seemed to stop accelerating a few times.
View 2 RepliesSo I go and get my oil change on Sunday at a local place. Oil change is done and later that evening my engine light comes on (solid orange). I call the local VW service and they say its nothing to worry about. "Maybe a little moisture got inside my gas tank." The service manager said to continue to drive it like nothing is wrong and it should go off. Here I am two days later and its still on. So should I be worried?
View 9 RepliesAfter taking my 2009 Corolla S to the dealer on 4/07 for an oil change, about 4 or 5 days later the check engine light, the traction control light, and the VSC light come on (VSC off blinks). The first day it came on, I took it to autozone to look the code up and they said it was P0353 (issue with ignition coil c I think). I immediately afterwards drove to the dealer to see what they would say. But after parking in their garage speaking with the greeters, they said the light wasnt on, and asked if I wanted to wait the 2 hours to see a tech. So I took it home.
The code came back about 3 days later, and this time there was a slight stall/jolt for about 4 or 5 seconds. This occured on startup and not during driving. After the 4 or 5 seconds of the mild jolting it felt like it was running smooth. I took it home and after leaving it off for about 20 minutes, the light went out again. A couple days later it came back and stayed on over night and was still present when I started it the next day. It went off again later that day.
My question is what could be causing this that might be a simple fix. Do toyota techs check anything with the spark plugs during normal Oil Changes? I know they checked my brakes but Im not a car guy and am not really sure all that they do. Could it be a loose spark plug? Code P0353 coming up sporadically after dealer Oil change. Is there any steps they normally do during the oil change that could be causing this, like leaving a spark plug loose after checking them or something? Would the coil / wiring harness fall under an engine warranty?
I have a 2000 1.8t and I was on my way home from work, sitting at a traffic light and my rpms went up to 1200-1500 and then my check engine light came on.
View 7 RepliesMy check engine light has been on for 3 days i get my appointment with VW and then today i start it up and it goes off. Also, having a problem with very loud squeaking coming from the front bottom left of the engine ?
View 17 RepliesI was running late the other day for work so I had to jump in my car and go with out letting it run first for a minute or two and while on the highway the engine light came on and it has not turned off yet. I am getting my oil changed at my local shop on tuesday.
View 4 RepliesOkay, I bought this car used and the previous owner apparently didn't maintain it. So I spent the last couple months having a new (used) engine installed. All said it's been in the shop longer (by twice) than I've been driving it. On the way home from the mechanic the check engine light came on.
If I keep changing my oil every 2000 miles will it sludge again? Dealer recommended every 1500 to 2000 miles! I've spent 15k on this car so far, and driven it about 2k miles......
Got in the car this morning and started it up. Other than it being -6 degrees out, nothing unusual. The damn check engine light came on. Nothing seemed unusual driving it. Will be checking it tomorrow.
View 14 RepliesI have a 2001.5 passat and the check engine light turned on. It just so happens that whenever i put gas in the car.... and try to start it back up, it won't start! it takes about 3 or 4 tries for it to start up.
View 3 RepliesI recently got my 40k service done at a VW dealership. This morning, my check engine light came on.
View 11 RepliesI have a 2003 W8 and the check engine light came on today for the cam b sensor... The car has had no problems and drives fine, I do not quite get why all the sudden it is on, and before I bought the car, 2000 miles ago the cam sensor was replaced for inspection, and I drove it for 1000 miles, and now the mil is on and it is running a little ruff... Where exactly on the head is it located? which head would have cam b sensor? I really do not think it is bad again.
View 2 RepliesI have had a check engine light on in my car for a while now. I am pretty sure that it deals with the disconnection of the vacuum servo that controls the intake manifold's flaps that designate which track the air takes through the manifold. It has been running fine like this for a while under the assumption that because the performance of the vehicle hasn't changed, there is no need for immediate repair.
Here is my new problem which I am trying to determine if it has to do with the above issue. Over the past few days my car has been giving me EPC and ASR lights along with switching to back-up power. I have been on expressways driving 80, i have been going around corners doing less than 20, and it has happened everywhere in between. Keep in mind that when it happens i slip my car into neutral, pull over, and reboot. After that everything is fine for a short while. I stopped at Auto Zone to get a diagnostic, and for some reason, which i did not feel like questioning due to the way the autozone employee was mentally equipped, they did not give me codes, but descriptions.
(1) Camshaft Positioning Sensor Fault A Bank 1
(2) Camshaft Positioning Sensor Fault A Bank 2
(3) PCM Processor Fault
(4) Running too lean on Bank 1
(5) Running too lean on bank 2.
These are the descriptions for the 5 fault codes. I am planning on stopping back today and getting the proper codes. But would like to get some opinions in the mean time. I've check fuses and relays pertaining to this issue and all have tested ok. Nothing is leaking from my engine and nothing is visibly damaged, except for the vacuum servo arm which is broken (see above paragraph). I feel like the issue is with the ECM (PCM, PCM, ECU, whatever).
Another interesting thing is that when i operate my car using the cruise control, there are no issues what so ever. Possibly an issue with the throttle or its many components?
After I finally got around to replacing my ABS pump I went to get my smog check done. Passed except I didn't drive enough miles to qualify.The SMOG tech told me to drive 150 miles and come back. I drive the 150 plus miles and within that time my check engine light comes on. I go to the shop and have it reset.
How many miles do I have to drive the car after a Check Engine Light reset in order to qualify for a Cali SMOG Check.
I have taken my car into service twice because of the check engine light being on. They fix it and say it has something to do with the intake. It is now on for a third time. Obviously they are not fixing the problem. BTW, I have done no modifications to my car.
View 7 RepliesHow do you reset the CE light on a 99 passat?
View 8 RepliesOk, recently my check engine light came on and i read the code with a cheap-o scanner. It read an o2 sensor code (up stream) i then read it again with a scanner that advanced auto parts offers for use, and it read p 1138 i think. I looked the code up on line and it was a fuel lean bank 1 or something like that. All the info i found sugests a smoke test of the vacumm system. I fist did a visual check of the hoses and also a few burst of carb cleaner and listened for the idle to raise but got no results. I also changed the o2 sensor for good measure, is there anything else i can try before i shell out the cash for a full diagnostic.
View 1 RepliesI had a check engine light pop up and I went and got it checked out. Comes to be its a IAT sensor or bad connection with this sensor. I change the sensor and made sure the wires on it is all good. The question is, I still have the check engine light up, does the code need to be deleted? And what happens if the code gets deleted and problem is not fixed?
View 3 RepliesSo I've just come back from the 5th time visiting the dealership for them to clear the "CHECK ENGINE" light off of my dash. Each time they've told me that it is my gas cap....so on the 4th time I bought a brand new gas cap. This time the car drove for 478kms...then the light came on again. I know they are just gonna say EVAP (gas cap issue).
What is the next step? What else could be tripping this fault?
Alright so my mothers car is a 2000 passat 30v v6 5 speed and the check engine light will come on and off at random times. I had the codes checked yesterday and one was for the Mass air flow sensor and the other was for the "heated" oxygen sensor but what confuses me is that the light will shut off then turn back on a day later. I have to get this car through emissions for her and cant with the CEL
View 4 Replies