which number pins on the back of the euro switch are for front and rear fogs????
what is the easiest way with out drilling to run 1 small wire from the back of my euro switch thru the firewall and into my engine bay?? or if drilling is necessary where is the easiest and safest place to drill?
I just bought a Euro Headlight switch from ECS, it doesn't turn off the day time running lights, they come on when I release the e-brake just like the oem switch allows..
View 7 RepliesI have a 2011 camry, and i want to install an amplifier and subwoofer box, but i cant find a grommet or anything to run a power cable through the firewall. Also, when i connect the rca to the head unit, how do i wire the cable, from behind?
View 8 RepliesTrying, to retrofit the TPMS 'clearing' button for the system that uses ABS. Easy enough to fit the button, but need to run a wire to the ABS module. Took out the glovebox/cubby hole hoping it would reveal where the main wireharness goes through the firewall, but there is a big plastic unit behind the glovebox. It would have made life easier as the ABS is right in front of the glovebox but guess I'll need to take another route.
View 2 RepliesI am trying to run a power wire through the firewall for an amp. I can't find a place to run it ....
View 1 RepliesJust bought a used, 03 F-150 SuperCrew Lariat. Having some minor electrical issues. While cleaning truck, I discovered a red wire coming into engine area on passenger side of vehicle. Wire has a built in 40amp fuse but isn't connected to anything. What this is for/ should be connected to???
View 1 RepliesThe red wire coming from my fire wall is not connected to anything and I need to find what it is supposed to connect too it come out of my firewall near my steering column ... This is and 95 f150 with a 302 engine ...
View 1 RepliesWill the Mk5 Euro switch work on the Mk6 Golf?
View 9 RepliesHow do we activate the rear fog on the Tiguan? I have been playing with the coding but have as of yet found a way to activate it. I am assuming that it will be one of the lights on the hatch that is supposed to be the rear fog...but can not find or get any info.
I have the parking lights active already...now I want my rear fog active as well. I don't care about the dash icon...but I do want the light to actually work. I have done this on all of my previous cars (run the wiring etc) but this Tiguan seems to be eluding me! [IMG] [URL] ....
Just installed my Euro switch from USP Motorsports, When I have the DRL's on with fogs whichever side the flasher is activated on dims the L.E.D DRL instead of shutting it off or keeping it at full power. Is this normal?
View 3 RepliesI have led bulbs in the stock tray Because I can't find red bulbs to fit these tails. Can't put white bulbs because my brake lights will be white and NYPD will be on my case
1.w euro switch turned off one bar in 3rd brake light on and top two bulbs on but dim
2. When car is turned off switch off top bulbs stay on but dim but they turn off after a few minutes
3. Replaced both license plate bulbs and only the left side bulb will illuminate but if I turn the euro switch from on to off quickly the right bulb will Flicker as if it had a quick jolt of power to it.
4.turn signals are led ambers they blink way faster than stock is this normal?
Having a few electrical issues lately, that are really starting to irritate me. This is pretty random. OCCASIONALLY, not all the time. When I turn my euro switch all the way to the right, my windshield wipers will go across the windshield twice. Obviously the wipers aren't on. And I don't accidentally hit the stalk. This just random and annoying when it smears stuff across the windshield. I don't even know where to start.
View 2 RepliesI need Vag-Com to reset a failed lamp warning light . . . I'm assuming because I ended up pulling the switch out too far, which commands the rear fog light to come on, which doesn't exist, I caused the "lamp failure" warning light and chime to come on and NOT GO OFF (I installed my new Euro headlight switch last night).
I checked and have no dead lamps. I put the old switch back in for a bit but it's still reporting a failed lamp. I searched for this problem before posting but the search engine on this site is extremely poor ... .Couldn't find anything in the manual either. It assumes we're idiots because it says a certified mechanic should change the lamps but oh, carry extras with you !!??
I have been having an issue with my interior lights, namely all the dash lights (cluster, climate, stereo, etc)
I have to keep switching the euro switch back and forth until it finally switches on the interior lights. The headlights still work but not the fogs, unless the interior lights go on.
What this could be? Perhaps an electric problem? Faulty euro switch?
My friend got me a euro plate for my birthday( he could of just given me his 911s ha)
i just need to know what I need to mount it.
Just installed a euro wood/leather wheel in my wife's 03 Passat wagon. It had the MFD wheel previously.I've done the install numerous times as far as going from MFD wheels to GTI or R32 wheels and never had this problem.
Ran a jumper from pin 9 to 18 and modified the plug to the clockspring....I got the cruise working no problem and that's the toughest... I've double checked everything and think it has to be with the wheel itself. I see the wheel has TWO tabs for the horn ground. I'm only using one right now as that's how my R wheel is in my 03 Jetta (just pulled the bad and checked it). What could be causing the horn not to work?
where do the wires from the cabin aux switches end up? Are any pre wired to outside of the cab (past the firewall?).
i was wanting to install a better back up light on an aux switch but don't want to deal with running thru firewall, etc.
I need to wire the power lead to my amp in the boot, but can not find a hole in the firewall. Saw the quide for 2008 Passat, but the hole under the battery in drivers engine bay does not exit in my Passat.
View 10 RepliesI am putting work lights and LED warning lights on the back rack of the 2014 F350 diesel in work. Where are the wires for the upfitter switches, and are they prewired into the fuse box, or do i have to hook them up?
View 7 Replies2009 tiguan 110k oil drilling passage plug blew out between engine and auto trans.
View 2 RepliesI'd really like to add these to The Beast, but don't want to drill through chrome. My bumper has some plastic running along the top (see pic). Just looking for info for the same bumper mounted the sensors there with success.
View 9 Replies