Phaeton :: Squeak / Judder On Electric Steering Wheel Reach Adjustment
Apr 6, 2016
My steering wheel, when pulling away or towards me (reach) is juddery/squeaky. I think its the 'rubber bead/dust seal' under the instrument binnacle rubbing on the plastic steering column shroud as it moves in and out. It works and doesn't sound slow and the motor does not sound under strain, its just noisy as the shroud does not run smoothly against the 'rubber bead'.
Up and down (rake) is quiet.
To lubricate the plastic is silicone lubrication spray the way to go? Or is there another lubricant and/or quick & easy way to get it to not squeak.
Its not a big deal, but it would be nice to have it working properly when I get in and out.
View 5 Replies
Advertisement
The electric motor which adjusts the steering wheel position has begun to "rumble"--When I enter the car (keyless entry) and the wheel begins to assume it's pre-set position, a loud grumbling noise occurs. If I then use the switch to readjust the position, I again hear the noise. Is there a way to lubricate the steering wheel (WD-40?) without causing other problems?
View 1 Replies
I have a 2001 Toyota highlander with 160000 miles on it. I recently got new tires and alignment. The problem is when I reach 65 my steering wheel starts to shimmy. The wheels were balanced and the shimmering last for ten to fifteen minutes. What might be causing this?
View 5 Replies
Looks like I've got the classic electric steering column failure. It still works in and out but won't go up or down. I think it won't go up as the column is at the top of it's travel. I can hear a click from within the column when I press the up button but nothing when I press down. So I've done a quick search but I can't find the post which shows the replacement of the wiring. It's probably me being stupid and it's starring me in the face. Also I've got no warning come up on the dash is this a good thing? I haven't plugged the VCDS in yet I'm not expecting it to show anything.
View 6 Replies
Been monitoring this excellent forum for a while, having taken the plunge last year. The car is stunning, although I have been waiting for a gremlin or two for a while now and it finally seems to have happened.
Having set up the driving position using the excellent forum guide, all was well. Last week, however, the steering column failed to move out from the dash to the memorized position. I have tried manually, to no avail. All other motion - up, down and away appear to be normal, just the switch or motor that moves the column towards the driver.
View 24 Replies
Is there a way to move the wheel higher than the highest setting? I like to keep the seat at its highest and its difficult getting in and out of the truck.
View 9 Replies
I have a question about my electric windows and Radio being effected by the steering column tilt angle being adjusted, I left my car at a parking lot where they park the car for you; when I returned I noticed that the tilt angle was adjusted which I never touch but for some reason. The attendant adjusted it; when I was driving home I noticed that my windows did not work; so I readjusted the wheel and they began to work again, then I noticed if I don't put the key in the ignition just in the right spot the electric windows and radio won't work; lol ;Is this because the wires behind the steering wheel were pulled do you think; and if so I'm pretty handy do you think this is a fix I can fix?
View 7 Replies
I've got 2003f150 4x4 and had a fender bender front end out of line so had it lined up but steering wheel 180 degrees out..well watched a video about just adjusting drag link..so i crawled under ready to adjust but cant find an adjustment collar. Mine the only one without it?
View 10 Replies
I've been getting some judder in the ride when my 3.2l V6 petrol engine is under load at low speeds - usually around bends or uphill.
My VW main-dealer diagnosed this as a slight misfire - not enough to bring on the check engine light. They checked the coil packs and the sparks have been replaced - no problems with either.
They then checked the compression on all 6 cylinders - and apparently Cylinder 4 is running at 7.7 BAR and Cylinder 6 is running a 14.3 BAR. Compression 'at new' would be around 13 BAR and anything below 7.5 is considered 'wear'. Pressure on the other Cylinders varies between 11 and 9 - see below:
Cyl 1: 11
Cyl 2: 11.4
Cyl 3: 10.8
Cyl 4: 7.7
Cyl 5: 9.3
Cyl 6: 14.3
I can't see how I could be getting MORE compression than 'at new' on one cylinder and so much less on another. I also have a feeling that the problem is worse when petrol is low... Engine has only done 75k miles and has full VW main-dealer history. Have tried the old 'Italian tune-up' with Forte engine additive - no change. A knowledgeable friend has suggested it might be the Hydraulic valve lifters sticking..
View 4 Replies
Steering wheel that squeaks or creaks when you turn it? It's not very loud but getting annoying...
View 2 Replies
I have recently bought a B5.5 2003 Passat 1.9TDI SE. It is a really nice car but recently it has developed a fault. When I turn the steering wheel it squeaks. It sounds like the steering wheel is rubbing against something. What could be causing this ? Does it need some lubricant applying ?
View 1 Replies
I have a 2006 LX with 25k miles.. within the past 1,500 miles or so, I notice there is a squeaking/creaking/rubbing sound coming from the steering wheel column when I turn (and cut, specifically) the wheel at stopped and low speeds (such as pulling out of the driveway or maneuvering into a parking spot). At faster speeds this doesn't happen.
I intend on bringing this to the dealer. What should I expect, and should I bring this in ASAP?
View 12 Replies
My sister has a Camry that has a squeak in the steering wheel occasionally when you turn the wheel. She lives in another state, and so I'm only going by her description, but I'll be visiting soon.
She describes it as an intermittent squeak/groan when the wheel is turned. I think it may be plastic on plastic, but it is definitely coming from the area around the column (up by the combo switch and ignition switch area), not down by your feet, she says.
I'm not sure of the year, but it is in the 2001-2003 range, I believe. I think this is just an annoyance thing, not a mechanical problem.
View 11 Replies
At center, my truck is able to turn 2 1/2 revolutions to the right and only 1 1/4 turns to the left. Making sharp left turns is not possible currently. What needs to be adjusted in order to get the steering centered and even?
View 4 Replies
I've searched and can only find instructions/details on 6.4L and older Super Duty trucks. The process is the same to adjust the gear box for a 6.7L?
View 5 Replies
This is a known issue with Lexus. Bring your Lovely RX to the dealer so they can replace the Steering wheel column, so it will stop the "Squeak" noise.
View 2 Replies
2002 Solara, 69K miles, occasional squeak from steering wheel when turning, sounds as if it is coming from where the wheel connects/rotates at the column - sounds like a weak rubber horn (like clowns use) or a rubbery, balloons-rubbing-together sort of sound. Not loud - only noticed when I was w/out the radio on (had an exhaust repair last week and was enjoying the quiet). It's not an external steering pump whine - it really seems as if it is coming right the steering column. Short of leaving cheese to there to coax out a mouse . . .
View 6 Replies
I had the clock spring recall done last week and now when I turn my wheel almost to full lock for a tight turn, it has a little "chirp" when going past a certain point. I'll definitely bring it back to them to correct it, but I'm guessing no quick fix but I can easily remove my airbag and check from there.
View 4 Replies
Had the car at the dealer over the weekend for oil change. Told them I was hearing a squeak when turning the wheel, not just when it is cold. Anyway they told me that my rack is leaking and they ordered a rack and P/S Pump for some reason? Does that seem normal at 38,000 miles. Also I asked if when they replace the rack do the align it, answer was no, even though parts are under warranty. I drive mostly highway but maybe 2 miles in the city where the roads have been pretty bad while construction is going on, Not sure if that hurt the rack or something else. The dealer hit me I think at 15,000 mi to change the P/S Oil for some reason, so it is all covered but I just think it is odd to go that suddenly. What next? I don't abuse the car at all.
2009 Sonata SE V6
View 6 Replies
2007 Hyundai Elantra, gets this noise/squeak when around freeway speeds.
I took this short video, squeaking starts around half way in: Video - TinyPic - Free Image Hosting, Photo Sharing & Video Hosting
This is a really annoying noise .
View 3 Replies
I have a 2000 Ford F150 XLT 4X2 that has a "clunking/squeaking" noise in the steering wheel, intermittent happens driving straight down the road, hitting bumps, breaking. It is very annoying! changed out lower ball joints tightened wheel bearings, greased idler/pitman arm thinking that was the problem and it became worse. Had someone look at it and stated that the steering shaft was welded?!?! Why would the steering shaft be welded what am I looking at in replacing it (cost for parts and labor time) and are there any other additional parts that will have to be replaced as well?
View 1 Replies
