Prius (Gen 3) :: 2012 - Noise Like Loose Metal Scraping / Rattling On Pavement
Oct 1, 2013
My 2012 Plug-in spontaneously started making a metal scraping/rattling noise in the middle of a low-speed drive around the neighborhood yesterday. Seems to be coming from the left front wheel area. I've checked thoroughly under the car and in the front wheel wells for anything that could be dragging/rubbing, and I can't find a culprit there.
It occurs while coasting in EV mode, so not ICE/exhaust related. The car doesn't pull to one side or the other. Only 9K miles, so I wouldn't suspect a hub bearing or any other significant wear to be causing this.
Possible clue or red herring: the dealer replaced the the left front tire and did an alignment two days ago, and the noise occurred within 15 miles of driving after that service.
View 6 Replies
Advertisement
I'm pretty sure I know what the problem is since when I hit the brakes it stops. When I took the left side tire off and right side I compared and there is a thin metal sheet that has room to move on the right, but is tight on the left. When the brakes were done before maybe it didn't seat correctly or something. Just wondering what that plate is called so I can order one and change it. Driven that way 2 years, but it bugs me when the window is down and people probably think my car is falling apart. Maybe I'll search for a brake diagram.
Edit: I think they might be called "anti squeal shims". I saw a picture of them, so maybe they didn't put enough high temp grease, but the left side is tight and the rights side you can move a couple milometers side to side so I'm sure that's the jingling noise.
View 13 Replies
This is finally getting too annoying to ignore. The noise sounds like i'm dragging a piece of metal along the ground whenever i turn right. the sharper the turn, the louder the sound.
View 14 Replies
I picked my R up three weeks ago tomorrow. I took it in this morning because there has been brake noise from day one. The noise was a scraping, metal on metal sound that diminished a fair amount when the brakes were warm. I only got a very brief conversation with the service agent at the dealership this afternoon, and all he told me is that they had to order in new brakes. I don't know if it's just pads, or calipers or rotors or the whole deal! I'll get the whole scoop tomorrow.
View 5 Replies
I have a 2000 Toyota Solara with 145,000 miles. When I make a right turn, there is a scraping sound like metal against metal. Its not loud or shrieking. Its hard to hear over talk radio. But in the garage I can hear it, and its been getting louder. I haven't changed or replaced the tires in awhile or had any other work done to the right tire since long before the noise started. Is this something serious that requires immediate attention or is it some loose piece of plastic?
View 2 Replies
One thing that brought me here is the noise of my liftgate when being closed. When the liftgate contacts the latch it makes a rattle-y/loose sound. The trunk is locked and secure however the sound is very off-putting. I bought my 2010 Prius II as a CPO last year and never really thought much about the noise, only that it didn't sound very pretty.
However, I was recently sideswiped and was put in a 2013 Prius II and the liftgate closes with a solid thunk with no loose rattles. What could be causing this squeaky/rattle sound? I thought it could be my license plate frame since rentals typically don't use frames, but it seems really unlikely.
View 4 Replies
Background: 2003 jetta; just changed rotors and pads on rear wheels a month ago, they are disc brakes
So the other day I was driving in a school zone at about 20 mph when I heard a VERY loud sound, like I'm dragging metal. i might also describe it as two rusty metal plates being rubbed against each other, but really really loud.
The noise is related to speed, it sounds cyclical and speeds up as the wheel turns faster. It occurs when I am NOT braking.
I parked the car and came back to it a few days later move it and the sound disappeared for the first 100 feet and then came back.
We did 2 things - we changed the caliper, and we also noticed that a caliper bolt was missing. I am pretty sure the noise was coming from that missing bolt - i think the caliper became dislodged and was making contact with the rotor. The caliper also seemed to be dragging a little bit so we went ahead and changed it too.
View 10 Replies
So...I just took my car in last week to replace the TPS and noticed that the car is now making a weird sound when I reverse (out of parking spaces, etc). The sounds seems to be coming from the rear of the car the sound is similar to metal scraping concrete and happens intermittently. I'm wondering if this is a random coincidence or if this could be related to the recent work done on the TPS. If my brakes hadn't been completely replaced a year ago, I'd suspect it might be those. What could cause this sound?
View 5 Replies
I've recently ran into some issues with my Passat. The other day while driving I noticed a scraping noise under my car. I got out and saw two bracket looking things were hanging down. As far as I know, nothing has changed to the driving but I want to know if it is something really serious. They are on opposite sides of each other, each about a foot length from the front tires (toward the middle) and one appears to be more bent than the other, probably due to scraping.
View 7 Replies
I'm the proud owner of a 2008 RX350 with low mileage (40,000 miles - US model). I purchased it a year ago and I haven't had any mechanical problems. However it's been 3 months that I have this rattle from the rear, especially when driving over uneven pavement.
I had the vehicle checked by a local mechanic but he couldn't find any loose part at the exception of the spare tire plastic cover underneath that looked a bit flimsy but he couldn't tell for sure... I even did an oil change at a Lexus dealership and they didn't find anything when they hoisted the car but they didn't look hard either....
I've disconnected the tonneau cover and put the release latches, for the tonneau, in the lock position (towards the front of the vehicle). That didn't solve the problem. Lastly I removed my plate cover and still didn't resolve it.
Anyway, the rattle seems to come from somewhere underneath, around the trunk area and is loud when you hit bump or drive on uneven road and it's driving me crazy!
View 3 Replies
My R32 has got about 9,400mi on it, and for the past 3k miles or so, i've been dealing with this metallic scraping/rattling noise coming from underneath the car. When I took it to the dealer, they said it was the exhaust flex pipe, so they replaced it under warranty. Next day after picking the car up, same noise. So i took it in again this morning and they are saying its the flex pipe again, and they don't know if it is fixable.
They are talking to VW tech assistance, and trying to figure something out. I really love this car, but if VW says there is no fix for it, I'm weary about possible future issues without fixes too. Apparently it has something to do with the length of the flex pipes and the material its made out of. He was saying one possible solution is stiffer engine mounts. We'll see where this goes.
View 8 Replies
Since about 5000 km, I have had a knocking metal rattling sound happening when I accelerate up a hill or a slight incline. It has happened a few times on flat road as well just more prevalent on the uphill battles. Now I assumed it was jus something loose that was rattling since I installed a cold air intake and had installed hid lights(I thought the ballast was banging on something). I tried and tried to find the rattle but I had no success. I read up on here about other people suffering the same problem and that running higher octane gas would solve it well I tried 89 and it was still there just not as much and I recently started using 91 and its gone haven't heard it at all.
View 132 Replies
I have a loose, binding, metal on metal sound on my steering wheel shaft. I have removed the steering wheel, replaced the clockspring, because when I removed wheel clockspring was in pieces and I thought that might be the issue. Guess not, because I'm still having problem. Other than having to remove or replace the whole steering column...
View 2 Replies
When driving slow, and hit little bumps it sounds like its a loose exhaust, or something metal is loose. The sound is coming from the drivers side. What it might be, or had the same problem? Really don't want to take it all the way to the dealer.
View 14 Replies
So for a couple months now, my ride has been making some weird noises.
When I start the car up after anything longer than a couple hours of use, it sounds as if I have a piece of loose metal banging/moving around. I hear it sporadically on shifting through the gears, and when I'm at a stop.
Car has been in to the dealer three times, and I took the foreman on a test drive...of course it wouldn't make the sound at all.
I took a look under the hood today and noticed that the coolant level is low...filling it back up tomorrow. That got me thinking about the transmission fluid....I looked and looked, and can't find the transmission dipstick anywhere.
Any clue where I can find some way to check the level?
View 6 Replies
I commute 180 miles a day, 6 days a week. I noticed metal on metal grinding noise(more noticeable) at high speed above 75mph especially on asphalt road. I'm sure noise is there at low speed but not enough to notice. My car has 50,000 miles. Tires? Electric motor?
View 7 Replies
I recently worked on a 2006 with 140K miles that presented with the following symptoms:
The hybrid battery was at 1 bar; the ICE would not start; the car was in Ready, but there were no codes. As I let it roll off the flatbed wrecker in Neutral, it felt lumpy. If you have ever pushed a car (or run out of gas in one) with a manual transmission that was in a high gear, engine off, it felt just like that.
I popped the hood and could see that the engine crank was turning while the car was being pushed in Neutral. What else turns with the wheels? MG2, or more specifically, the MG2 ring gear. What is the only way that the wheels could turn the ICE crank? The planetary carrier pinions were locked to the ring gear.
Surprisingly, while I was looking at things, it did manage to start the ICE pushing it around must have freed the carrier pinions, so I let it charge the hybrid battery. It was basically the worst metal-to-metal noise that I have ever heard! I pulled the drain plug and saw about a teaspoonful of large metal chips on the magnet. The fluid condition itself was very good, not the black factory fill that I am used to seeing come out.
View 19 Replies
When I accelerate I notice a rattling noise almost each time. Is it bad gas? I have been getting gas (90-95% of the time) at the same gas station for years, including the whole time with my 2011.
Also for the first time today i got an error message on my screen for the radio that says something to the effect that the USB has too much power consumption and will not run.
When I powered off and powered back on after lunch it started working again. I never had either problem with my 2011.
View 10 Replies
I have Toyota aqua 2012 model imported from Japan mileage about 82000 Km.
View 6 Replies
Was talking to a cab company running over a hundred Prius, they like the gas mileage.
Biggest problem running a hundred plus Prius in LA is the skirt front bumper is so low to the ground (for better aerodynamics) ... less than 5 inches ground clearance when loaded ... it hits the ground and bows the side moldings of the bumper.
View 5 Replies
I have a 2011 Prius with about 32K miles on it. I've been hearing light metal on metal grinding noise for a few days now. So I decided to take it to a stealership and they told me my ceramic pads and brake rotors both need to be replaced for all 4 wheels. I thought Prius brakes don't need to be replaced for 100K miles.
View 7 Replies
