I've noticed over the last few days that my seat position memory is gone. I thought maybe it was because i was using a different key, but that is not the case. I tried resetting buttons 1, 2, and 3, and neither set my seat to the position i specified. Button 1 is the only one that works, but it puts the seat all the way forward. Is my comfort module shot??? brand new car.
View 2 RepliesI picked up our ("our" means my wifes) GX last Friday. I'm a sports car and sports sedan guy. But I love buying vehicles, and I a huge car nut. It's a heck of a nice Luxury SUV with a lot of nice features.
One question so far. The web site specifically says the passenger seat position can be saved to the memory, but for the life of me I don't see how. Can it?
Does the memory seat function remembers the back position (angle)? Or does it just remember the height and forward/backward position of the seat? The back angle position is not remembered in my 2014 Avalon Limited but I am not sure whether I should report this as a problem or whether that is just the design.
View 2 RepliesMy exit seating position was working great up until this morning. The seat remains in set position. Am I missing something or is it to the dealer I go.
View 5 RepliesHow I can go about programming my smart key remotes to the memory positions of the vehicle? I had it all set up from the dealer and since then they had to disconnect the battery for something and now I don't have that feature. It was setup where I can walk up to the car and unlock it by the remote or door handle and it would put the memory position to that remote?
View 4 RepliesI just got my car back from a body shop, after they fixed all the rock chips on the front. Now I realize the seat position memory is not working for both the driving and passenger seats. Not only the button does not move the seats, but I can't set the new positions into the memory either.
View 2 RepliesWe got a Manual Passat SE a couple of months ago. Unfortunately its the best trim you can get in stick shift and I've subsequently found a few features which I'd like to add.
Driver side seat memory - Flicking through the manual I noticed that the seats can adjust based on the key used to open the car (BTW - AWESOME). My wife has a complete different seat and mirror position to me and so this would be really handy. Remote car start, and keyless entry would also be a bonus but really just a nice to have.
Cornering fog lights - This is more of a treat for my wife who preferred the look. Although given the wide range of weather we experience in our new home in Chicago I think it'll be a great addition.
On several other cars I've owned it was possible to link a key fob to seat memory. Meaning if my wife used her remote fob to open the car doors the seats and mirrors were set to her memory position etc.
I searched the owner manual and don't see this feature on our SC430.
New owner of 2014-RX350. I have figured out most stuff simply using the owners manual (go figure), but this one continues to stump me, as I have repeated the procedure right out of the owners manual without success.
Manual states to have only one fob or card present, car in park, "ignition on" position (I interpret this as two pushes to the ignition switch), push desired memory button and hold while pushing either lock or unlock button till chime sounds. I get the chime. But when I lock the door, wait a minute, and unlock the door by touching the handle, the car unlocks just fine, but seat does nothing. When I manually push L2 (in my case), the seat does indeed move into position. But I cannot for the life of me get this function to work.
how to fix this or test them ? could it be a fuse ?
View 10 RepliesDead battery. After recharging it, the car starts but.......
1. the seat memory buttons stop working
2. the radio that hasn't worked in 8 months since i own the car is working
when the radio wasn't working, i tried to put in new fuses and that didn't work. but a dead battery did.
I have a 2006 sc430 and have been having problems with the drivers memory seat although the passenger one works fine.
I have disconnected my batter for 5 minutes, moved the passenger seat all the way forward, heard the beep. Moved the reclining part all the way forward until I heard the beep, and the memory seat for the passenger works great.
I moved the drivers seat all the way forward, heard the beep. Moved the reclining part all the way forward until I heard the beep, but the memory seat won't beep (when you hold set and a number). I even replaced my drivers mirror (didn't tilt down due to bad motor), but that didn't work. Of course, I did redo disconnecting the battery and reconnecting it resetting both drivers seat and passenger seat.
I can set my seat to recognize what key is unlocking the door to set the drivers seat to registered position (1, 2 or 3). Now when I customize settings in the Nav area so that the driver's seat slides back partially or fully when shutting down car, it no longer recognizes the keys. When I cancel the slide back option in the Nav, it quickly recognizes the keys again. I like both options and do wish that there is a way to remedy this. Is this normal?
View 14 RepliesI have a 2016 GS 350 with the Luxury package so there are quite a few adjustments for the seats which is nice. However, every now and then, the memory positions I have programmed go away and I have to be in Park and select the memory positions again. I turned off the easy exit option because every now and then the seat would just go down to the floor on its own. No one else has been driving the car.
I go into the dealer for the 5,000 mile check up in a couple of months and will have them look at it but thought I would check with this group as well.
We have an Acura MDS as well and on that forum, there was a technician that would post service bulletins which was very handy when taking the car in while under warranty. Did a quick search for service bulletins but did not see anything. Is there a thread for the service bulletin list?
The memory button for my electric seat is no longer working. The seats works fine, however I can't use the memory setting. [URL] .....
View 3 RepliesI have a 2002 SC430 and the seat memory buttons on both doors stopped working suddenly. No work done to the car, but I don't know what gives.
View 14 RepliesGot an interesting electrical issue on my 2004. I'm not sure if the issues are related but they happened at the same time. About a week ago the nav door stopped closing and the seat memory buttons stopped working. When you press the close button the nav screen moves back but the door never closes. The seat memory buttons on the door don't work either but the seat adjustment controls do work. When adjusting the seat position, as the seat moves moves, you hear beeping. It sounds like the same beep that you hear when memorizing a seat position. I checked and tested all the fuses they seem to be good.
View 7 RepliesI recently purchased a GS350 from auction, thought it ran and drove, got it home, the car had a blown motor. it was an insurance scam from what i gathered. well, car is running and driving now, everything works great not a single warning light on the dash, but i do have a problem with the power windows.
The pass side front and rear windows wont go down, the seat memory doesn't work, and the window switches are flashing... i tried reprogramming them as one of the posts said by lowering the window half way etc that's fine but my pass side window wont go down at all. all fuses check out. and my sunroof works like it should. does this sound like a Module inside the door issue?
Why External mirror command and seat memory don't work normally on my GX 470. Some time is work and sometime not. Maybe some fuse or relay are bad now...
View 6 RepliesSo this morning, I pressed memory seat #1, and it did not move my chair to the position that I set it for. I had to adjust the chair manually. Every time, I move the chair back or recline the back, in intermittently beeped every 1-2 seconds. It does not beep if I move the chair forward. Could it be the fuse? or what could be wrong?
View 9 Replies99 Passat GLX Electrical Gremlins!! Glove box light, out, no power to light, fuse perfect, bulb fine. wiring fine. Also memory function on driver seat not functioning. All power adjustments on seat fine. I think problems are linked. Looking forward to access to wiring diagram? Seems to be a open circuit somewhere.
View 11 Replies