Jeep - Cherokee :: Loud Whining Noise On Startup / Heat Shuts Off Every Now And Then
Jan 18, 2011
My '03 Jeep Grand Cherokee seems to be having an array of problems lately, I think they might be related. Almost 100,000 and its falling apart on me. When I start it up on cold mornings it has a loud whining noise. The check gauges light comes on and shows the oil temp as being cold. After leaving it idle for a bit, I will go to drive it and the heater will shut itself off. Later in the day after the first cold start, the loud whining and check gauges light don't happen again. But the heat shuts off every now and then. Is it all related?
View 9 Replies
Advertisement
Here is the noise that I am getting... Ignore the ticks and such, I'm talking about the LOUD whining noise at startup, and continuing at idle(although somewhat quieter)
[URL] .....
Some information : 2006 Camry 2.4L.
I have removed the belt to verify that the noise is not from any belt-driven components. Using an Engine Ear, it gets louder towards the exhaust manifold, but apart from starting to tear things down.
View 2 Replies
We were flagged down on the highway by a very nice fellow motorist because we were gushing coolant. It was gushing. My passenger was a guy friend who used to work as an aircraft mechanic and works on his own vehicles, so I deferred to his supposedly greater automotive knowledge when he said I didn't need to call a tow truck. We got to within 100 feet of my mechanic (about 5 miles away) when my poor Jeep conked out after losing power and making an increasingly loud clunking noise for the last 500 or so feet. We pushed it in to the auto repair bay. The engine was smoking and would not start. The mechanic replaced a worn out radiator hose, which had become disconnected from the radiator (due to swelling, I think he said?), and the truck runs. There isn't a discernible difference in the engine performance after driving it around town for the day. My question is this: is the engine likely to be FUBAR and am I just playing a waiting game until it croaks?
View 8 Replies
Friend broke down. Car would start, but would die. Mechanic told him the cluster is bad, and the car thinks it's stolen. He said it's not the ECU.
View 10 Replies
My question is what could cause a high idle?I have a 95 Chevy pickup 4x4 with a 5.7... Recently the lower radiator hose fell came off the radiator, dumping the liquids all over the street. The motor shut down, and every time we went to start it there would be a loud whining/spinning noise. We thought that the motor seized, so we pulled the plugs, turned the motor by the crank bolt.Turned out that the starter went bad, the spindle and bendex werent catching on the flywheel.
After examining the flywheel teeth, and gapping the plugs to the recommended manufacture gap, (they werent when we pulled them), we got a new starter installed. It started right up! But it ran at a high idle, around 1500-2000 RPM. I did not have a chance to really let it warm up (it was cold and raining). Now there is a gray flexhose that is running from the air filter housing down to the exhaust manifold. If i remember correctly, it was not seated very well when I took it off. Could it be causing too much of a vacuum?
View 9 Replies
My Jeep GC ZJ 1993 with 202202 miles V8 engine and automatic transmission cuts off/engine shuts down. I have found that when I put it into 2nd or 1st gear it never shuts off. For example, I am driving with AT in D (Drive) and come to a stop, the engine shuts down. However, if I move the selector to 2nd before coming to a stop it never shuts down. BTW it also shudders and headlights dim and battery voltage drops before it shuts down.
View 8 Replies
I have a 99 jeep grand cherokee. Started car up and there is a shrieking loud noise. the car worked fine when i drove it yesterday. the steering wheel will not move. i looked under the hood and the steering wheel fluid is completely drained. do i just need fluid? what is the shrieking noise?? It's sunday so i'm unable to contact dealership or get the fluid that i was told i can only buy from dealership.
View 1 Replies
For those of you who have not purchased a new car for a while and are considering doing so in the near future I want to share the recent service experience I had for my 2015 Jeep Cherokee. I don't know if my experience was typical but I suspect it is.
I took my Jeep to the dealer for a routine service (LOF and tire rotation). The total time at the dealer was about 4 hours. Of that time, about 2 1/2 or 3 hours was spent in updating the software for the various computers. It had never occurred to me that computers were that pervasive in new cars.
Attendant to that, my Jeep has the 3.2L V6 engine, which comes with start/stop technology (when you stop at a stop light the engine shuts off and restarts when you take your foot off the brake). After the service was completed I noticed the start/stop function had stopped working. I contacted the dealer. The customer service representative spoke with the service technician, who contacted Chrysler. It seems that all of the software updates (there were a total of 6 of them) may take 3-7 days to become fully integrated into the system. I was told to wait a few days to see if the problem rectified. Sure enough, when I drove it today it had.
View 16 Replies
I have a 94 Jeep Grand Cherokee Laredo and when I first got it, it revved too high well now it revs too low, when im at a stop light it revs at just barely above 0 RPMS and the engine will cut off. it just ate shutting off yesterday. I took my car back to the dealership to get it fixed and they said "there's nothing wrong with it" well now I just passed my warranty and it starts shutting off on me.
View 2 Replies
I have a 2000 Jeep Cherokee Classic with 214,000 miles on it. Ok......this hasn't happen too often, but scares the CRAP outta me when it does.The other day, it happened twice. Traveling on the highway, 65 - 70 MPH, the car suddenly jolts with a loud BANG!I've had the transmission fluid flushed.Each time I go in for service at my local garage, I have them check ALL the fluids. They never find anything. And are at a loss as to what it could be. They've dropped the pan and found nothing wrong with the transmission. No metal in the fluid. They've check the rear diff. Still nothing. I've gone about a year without the issue until this past Monday when it happened twice. I'm a little paranoid to go faster than 60 - 65 right now.
View 15 Replies
So as i pull into the laser wash today i realize that my coolant is running extremely hot. So when i pop the hood and find that there is no coolant and the globe. So I release the cap until it started steaming and bubbling up. With all the excitement i got a tad emotional and punched a hole in a wall inside the car wash (painful) Upon a second look i realized that a problem i have had before had been keeping my radiator fan from running
I am also dealing with a problem involving the climate control draining power. If the AC or heat is on the car's idle bounces around and causes a loud whining sound. Also, the radiator fan does not seem to want to stay on for more than a second. I have been discussing this problem on a different thread
View 14 Replies
I have about 200k on my forester. Friday when I was leaving work I cranked it up and it made a loud knocking sort of sound. I drove it home (about 15 miles) and on the way the sound lessened. It was louder when the car was idling but she made it home ok. Next day, started the car and it happened again. Not more than 50 feet up the road we stopped at a stop sign and it sounded like a semi was starting up around the corner. Much to my dismay it was not a semi but my own car. Engine shut off. We pushed it back to the house and tried to check it out the next day. This time, we started it, didn't go anywhere, and within 30 seconds it turned off. Same loud knocking sort of sound. The confusing part is that all of this happened within two days. There was no gentle sound leading up to it for a few weeks or even a few days. Knocked on Friday, shut off on Saturday. What could be going on?
View 19 Replies
Had a howling noise that sounded like a bearing going out. After searching, I see that the fan belt is actually sliding on the pulley. Looks like a vertical alignment problem. It could be the idler pulley, the fan pulley or possibly the lower Crank (?) pulley knocking it out. I can see the belt sliding approx 3/8 to 1/2 inch . At idle it sits closer to the engine, as rev it seems to line up. All this action certainly means the belt is shot. But could be idler too.
I went through a few things to check it out. I looked at the power steering unit, pulled off the belt and check if there was any obvious play in each of the pulleys. All seemed ok. The idler seemed rough running but no wobble of play in it. I will replace the idler anyway since I bought one. The belt has no damage to it. It was changed about a year ago. So it's just been wandering on the fan pulley. Went to the Crank pulley and the dampener .and it feels tight. There are some obvious small plastic cracks on the outside. friend suggest pulling on the pulley and look for separation between the inner, outer, and rubber ring in between. Felt and looked tight. After I change the idler anyways, I'll look again. But could the crank dampener still be bad?
View 1 Replies
My jeep seems to be making a ticking noise in the back windshield. I notice it when I've been driving it for a while or on hot days. Once it starts I'll continue to hear it even though the car is turned off. Is it the glass? The seal around the windshield? How is something like this fixed.
View 2 Replies
My 94' Jeep cherokee 4.0l 2wd has had an issue that the steering over the course of several years has get some play in it now. It also makes sounds as documented in the video. I should also note it doesn't seem to do it when it's warm, but when it gets around 50ºF or lower the problem is there. [URL] ....
View 2 Replies
My wonderful car is making a knocking noise every time i turn right is it my axle or could it have something to do with my brakes needing changed?
View 5 Replies
My husbands jeep is driving him crazy. He drove it to work and started fine. Then went to start to come home. Nothing. No crank, no click, nothing. Towed home. Battery OK. Anyway, he put new starter on. Started up. I drove it to station. Got in to come home. Nothing. Same darn thing. We jumped it. Pushed it out of way. Started. It's done this many times. Let me say, though, he went through a huge amount of water before this happened. Gauges went nuts for a while. Don't know if this could've messed up a sensor. He's losing sleep over this.
View 1 Replies
1990 Cherokee 4.0 ... Well I've got a minor clunking somewhere under there that seems to vary with speed. now I have to figure out what it is. my working theories are wheel bearing, or one of the three hundred odd universals under there. perhaps a brake shoe or the transfer case. This is my first 4wd, so I don't know about transfer cases.... there is also some kind of weird double universal under there, I can t remember the name off the top of my head.
View 10 Replies
I have a 1995 jeep Cherokee country that has 130k miles. I have notice that when I shift from park to drive, park to reverse, drive to reverse or vice versa It makes this thud noise after placing it in gear. Is this a sign that the transmission is about to go out ? What action should I take? By the way its a automatic transmission
View 1 Replies
1990 Cherokee 4 L str 6 cyl
after shutting my jeep down I ve heard liquid moving. I decided to find the source. it turns out that I was hearing the oil draining back into the pan.
I was under the jeep with my ear next to the pan, no doubt of source.
this lasted about 15- 30 seconds before stopping. the front of the jeep was raised about 6", as I had parked it that way.is this concerning?
I was recently going to change my valve/rocker arm cover gasket, but decided to wait because it did not seem to be leaking and I did not want to use the inexpensive cork fel pro gasket that I had bought, I decided to wait until I could afford the more expensive gasket.
I did notice thru my oil fill cap that there is a lot of crud under the cover and I am concerned that my oil return drains are partially clogged.how can I clean these drains when I do change the gasket? since it has been strongly recommended here that I do not disturb the crud I m not sure how I should approach this. could vaccuming the loose crud with a shop vac be okay?
ps. dropping the oil pan is not an option right now because of the extensive labor involved on this model and the expense of all the new seals and gaskets required. I ve bought 200 bucks worth of parts and fluids this month and it will be awhile before I can afford more.
right now I have brake shoes, tranny filter and fluid, above gasket, oil and oil and fuel filters waiting on me to work on, and other non mechanical things.
to summarize my questions...
1) does noisy oil drainage concern you?2)how can I clean oil drains?
a. can I pour kerosene thru to clean oil drains, and to flush oil pan, which I can t drop right now?
b. can I shop vac under the valve cover?
c. should I add sea foam to oil for a bit before changing?
View 18 Replies
Jeep 2000 Cherokee
So I have this thumping noise, almost sounds like something is loose.The noise occurs for a few seconds when I accelerate from a dead stop and then goes away, it returns when I slow down and almost come to a complete stop.The noise also goes away when I put her into 4wd.The thump/rattle sounds like it is coming from the center counsel area and directly under the floor board in the driver seat.My car changes gears smoothly up and down while driving.
I was told it might be a transfer case problem and that it might need to be rebuilt, which makes me worry.
View 2 Replies
