Pontiac - Sunfire :: 2002 - Check Engine Light Turned On Again?
Nov 25, 2011
Check engine light issue. For the past 3 months, my check engine light has been turning on. The first time it happened, the garage replaced the EVAP Purge Solenoid (which includes the vapor can purge solenoid and the EVAP canister purge solenoid). Of course, a few months later, the check engine light turned on again. The second time, the garage replaced the gas cap. Then the check engine light turned on again the next day.
So, the third time, the garage performed maintenance/repair on the vapor can purge solenoid and the EVAP canister purge solenoid. Of course, three days after driving my car, the check engine light turned back on. I've contacted the garage for the fourth time now. I explained that their diagnostics have obviously been exhausted, and they aren't really sure what the problem is. I'm going back in a few days to speak to the lead mechanic hoping to be compensated for their guess-work or at the least to be given an honest "I don't know" answer.
View 7 Replies
Advertisement
My airbag light flashes six times when I turn my car on. Then it remains on while I'm driving. I have no clue what this means.
View 4 Replies
So I'm in the process of doing a rear brake job on a 2002 Pontiac Sunfire. Drum brakes. And (shocker - especially for a northern car that never had the job done before) the drum won't come off. I've spent two days with a propane blowtorch, PB Blaster, and a 3lb hammer. No dice. It won't even budge.
So now I'm thinking about taking an angle grinder to the drum and just replacing both (probably necessary, as I'm sure it's in terrible shape). I'm really at my last option here.
View 6 Replies
2002 F350 7.3 PSD. 192k miles.
From my understanding, a CEL is supposed to illuminate each time you turn the ignition ON as part of normal startup procedure.
I figured the previous owner must have pulled out the bulb to hide the fact that the truck had a few "issues" before selling it, so today I pulled out the gauge cluster and it looked as if the CEL bulb was a tiny LED soldered directly into the gauge cluster itself. There were a few serviceable/removable bulbs for things like turn signal indicators, high-beam etc... but the CEL did not have a serviceable/removable bulb.
I've been driving this truck and working through it's "issues" and fixing things as I go, but it keeps throwing codes without the CEL illuminating. What's going on here?
I thought the check-engine-light was supposed to illuminate each time the ignition was turned on, and that it would come on each and every time the vehicle registered a fault code in the ECU/PCM.
View 14 Replies
Here's the story: My engine misfires one night so the next day I check the spark plugs and there is oil in the far left plug well. I decided to change the valve gasket cover. Went to take off the covers and the cover wouldn't budge. It ended up cracking some metal piece that I SUSPECT houses the timing chain. I've included several pictures of my engine bay so you can get a feel for how it looks. Not sure what the part that is cracked is called. Anyway my real question is, is it worth it to replace this part and sell the car for around 1800 or just scrap it for about 500? The parts circled in red are where the crack is.
Pontiac sunfire 1997 2.4L 4 Cylinder
View 19 Replies
I am driving and my engine suddenly overheats. I pull over and see that my coolant is pouring out. I have it towed to a mechanic. The mechanic ran diagnostics and told me the problem was the water pump. After I agreed to that, he called and said he took it out for a test and the thermostat was broken. After I agreed to that, he took the car out again and now says the head gasket needs replacing. I asked why he didn't find everything at the start. He said he needed to test drive it to find out. Is this really how it works?
It is a 2001 Pontiac Sunfire ...
View 19 Replies
I have a 1997 Pontiac sunfire the other week I was driving and it stopped on me the engine would crank but quickly turn off but everything inside the car would still be on k was told I needed a new cat and got that and a new muffler put on. This morning I went to leave for work and the same thing happened again! I was told it could be the fuel pump or fuel filter but it doesn't act weird while driving it. What could this be?
View 1 Replies
Car occasionally fails to start or will start and immediately die. Engine turns over, spark plugs are getting spark, but engine either won't catch or will start and immediately die.
View 2 Replies
I have a 1997 Pontiac sunfire the other week I was driving and it stopped on me the engine would crank but quickly turn off but everything inside the car would still be on k was told I needed a new cat and got that and a new muffler put on. This morning I went to leave for work and the same thing happened again! I was told it could be the fuel pump or fuel filter but it doesn't act weird while driving it. What could this be?
View 7 Replies
I always take care of my car oil changes on time. And in the last week my check engine light turned on for a few hours then turned off. And today it turned on again. I kinda regret getting rid of my scan gauge now.
View 11 Replies
My friend has a 1996 or 1997 Pontiac Bonneville with over 130K miles on it and its been in her family for several years and she says the "Check Engine" light on it has never turned off. She's taken it to different shops to have it looked at and none of them can tell her what's wrong with it. As far as she can tell, the car runs fine, she keeps up with the service on it but I wonder what would be causing this? I once owned a 1999 Chevy Malibu with the V-6 3.1 liter engine and I had the same thing happen to me but when I had it serviced, the mechanic hooked a little code reading device to it and turns out the spark plugs were misfiring so he changed the coil pack in it....problem solved. So obviously my friend is having issues with fuel emissions system in it but I wonder why the mechanics in the City she lives in can't seem to figure out the problem. Not saying her car has the same problem my old malibu once had, there's a number of reasons why that light turns on and from what I've learned it usually involves the fuel emissions system in it. So what could be wrong with it?
View 4 Replies
I've had a check engine light on in my 3.5 Pontiac G6 for awhile now. It's an emission code (can't remember what code but evap leak). The solenoid by canister was also tripping a code that disappeared after I changed it. However, the evap code still persists. Last night while changing my oil I noticed the intake air hose to the crankcase had broke at the case and wasn't connected. It's the hose that runs from the engine intake to the crankcase for the PCV system.
I am replacing the hose regardless, but my question is; would the intake hose for the PCV system being loose cause an evap leak code? I am thinking no but it'd be nice if it was that simple.
View 9 Replies
Every year at this time I get check engine code about either the temp. sensor or the thermostat. I replace the temp. sensor every year, and last year I replaced both the temp. sensor and the thermostat and flushed the cooling system and replaced the coolant. but not this year, no I'm not doing it! For there has to be some other reason other than the temp sensor failing each year! 2005 Pontiac Bonneville 3.8 V6....
View 6 Replies
My wife and I recently bought a 2003 Pontiac Vibe, a Toyota Matrix with slightly different skin, and shortly after we got a check engine light. When I inspected the car before purchase I noticed that there was black soot in the exhaust pipe. The owner told me that he'd put a cat back exhaust but I suspected I'd probably be replacing the O2 sensors soon and we negotiated the price accordingly. So now it's a month later and I bought an OBD II checker. I followed the instructions and after the checker and the cars ECU linked it showed no stored codes. I turned off the CEL and we went shopping. Mid way on the drive home, we live out in the country, the CEL came on again. Went through the procedure again, still no codes stored. I've read the instruction manual twice and I don't think I'm doing anything wrong. Is it possible to have a check engine light on and there to be no codes stored for the OBD tester to find? I could have bought many rolls of black tape for what the tester cost and I kept the receipt just in case.
View 5 Replies
My check engine light started blinking on my 2000 grandam se last night and it was missing bad and now it wont start what is it.
View 13 Replies
I have a 2001.5 passat and the check engine light turned on. It just so happens that whenever i put gas in the car.... and try to start it back up, it won't start! it takes about 3 or 4 tries for it to start up.
View 3 Replies
Bought an R32 yesterday. used of course.. was doing fine feels like a brand new clutch. got it from a ford dealership, and the check engine light just turned on. I will go back for the 14 day policy but i was wondering if it could be my clutch.
View 8 Replies
About a week ago I was driving my Pontiac 2003 Grand Am V6 and it began to violently shake and the "check engine light" came on and started blinking. I then immediately took it to the mechanic It has been with the mechanic for 6 days and they were unable to locate the problem. They called me today and I was told that I have no compression in one of the cylinders (I have done business with them before and felt comfortable in that I wasn't being taken advantage of). Also, is there any problems in the future with getting a cylinder replaced i.e. other parts of the engine that might correlate?
View 17 Replies
My check engine light just turned on recently. Just hit 115K miles on my SC430 a few weeks ago. Is there a service that I'm missing? Running absolutely fine, oil change recently as well.
View 14 Replies
This morning, I tried to start the 2003 Prius and got a 'check engine' light and nothing. The cabin lights were bright so the 12V looked OK. After three tries, I used the VOM and measured 12.55 V on the battery. But the traction battery level looked unusually low.
So I tried again and it started. Using the ScanGauge, no codes were displayed. So I turned the car off and on three times and cleared the "check engine" light. Then I connected the Auto Ingenuity and read out:
P1636 - HV ECU Malfunction on the HV ECU to ECM bus.
C1213 - HV ECU Communication Circuit Malfunction between HV ECU and Brake ECU
P3002 - HV ECU Communication Malfunction on the HV ECU to Battery ECU
So it looks like there was an HV ECU problem that 'cleared while testing.' Certainly it makes sense to inspect the HV ECU connectors and re-seat them and clean out any debris.
View 2 Replies
My 2005 Prius has 105,000 miles. The check engine light came on for the first time ever. Dealer will diagnose tomorrow. If it's the main battery, should I sell it?
View 3 Replies
