Subaru - Legacy :: 2011 Outback Clicking Noise Fro Right Front Wheel Area When Turning
Dec 14, 2010
I bought a new 2011 Outback about 3 weeks ago, and I have around 1500 miles on it.
A couple days ago I started noticing a clicking noise near the right-front wheel area whenever I turn for the first time after I start the engine (releasing handbrake, shift to Drive, etc). This happens only one time per drive, and mostly after I turn to the right for the first time. After hearing that sound, the next time I will hear it is only after I park and shutdown the engine and restart.
View 7 Replies
Advertisement
I have an 04 WRX, I've upgraded the suspension (1.5" - 1.75" drop front and back respectfully) and have a full set up of strut tower braces. Recently when accelerating from a stop, I get a clicking noise from the passenger front wheel area, I hear it all the way through first, second, and most of third...the sound is probably present after that but my exhaust drowns it out. My first choice of problem is that the CVs have gone, the car has 140k on it...
View 2 Replies
I purchased a new Outback Limited (2.5) in April of this year. I've got a service appointment coming up next week for an oil change anyway, and I noticed that the road noise from the sunroof is very loud.
I own an `09 Legacy Limited which also has a sunroof and it's not even close in terms of loudness.
When I called to make my service appointment, I was told that this is really "normal" for the sunroof, and I obviously don't think so.
My Outback has a sunroof air deflector which might be causing the problem - none of my other cars have had this option and it came with it when I purchased it. I'm considering removing it, but I want to be sure this is the cause rather than a problem with the sunroof itself.
Has driven an `11 Outback with a sunroof (with or without an air deflector), and if you have, is it noticably louder than other cars you've driven?
View 5 Replies
I have a 2013 Subaru Impreza with 23,500 miles on it; all service done at dealer, by the book. Brought car in at 22,212 miles for rotational noise in front right tire area that becomes noticeable at 35 mph and syncs with speed of wheel (especially annoying at highway speeds). tires were at 6/32, inside edge 'slightly chopped'. Alignment was done; right rear toe out of adjustment. the noise remained.
returned to dealer; manager took a ride with, said he heard the noise, said tires (the originals) might be made of softer rubber and wear faster, or it might be a wheel bearing starting to go. he did a visual check of tires and measured tread. they replaced the right bearing. Noise still there.
Returned to dealer, they road tested , heard the noise, ran car on lift and 'traced to center of transmission', ordered a Subaru remanufactured transmission and installed it. the noise remains . I was especially shocked at replacement of transmission! (car is still under warranty so it's not costing me anything but grief and aggravation at no resolution).
I have always felt the problem is at the wheel, but i'm no mechanic. they are the experts. Could it be a problem with defective brake parts that somehow are rubbing or if the lugs are tightened too far could that bend something. I am not a street racer and I drive like I plan to keep the car for a long time!
When I called (after the transmission replacement) about the driver one-touch window not working, the desk guy told me how to reset it (very easy) and said that they'd forgotten to do that. I told him that the noise is still there and he said "well, it could be coming from the roof rack" (I have non-Subaru cross bars on the roof rack and a fairing. I thought that comment was lame as the crossbars have been on since 2013 and I've heard no rotational noise from them. However, to 'rule out', I will remove them and take a drive.
I told desk guy I was going to drive the car for a week or so because conditions have not been optimal with bumpy roads and weather to be completely certain. several days have passed since that conversation; the noise is still there and once I've driven without the crossbars on, the car is going back.I am hoping for feedback on what to tell them to check next.
View 19 Replies
My boyfriend has 95 subaru legacy L 2.2 that has issues. NEW: coil pack, fuel pump, spark plugs n wires, battery. (I forget the rest)
Background: While running the car almost out of gas (as usual) it starts to run rough, just thinking it was the gas, he gets gas and heads home but it does not fix the roughness. It stalls in driveway (lucky). A friend brings over obd scanner. Reads codes for cylinder 1&4 misfire. It starts and runs but sounds like crap. I tested the coil pack and the reading was bad, so got that and sparks n wires. Cleaned a bunch of fuel related parts (its been a while) and took out injector but apparently it was not back in all the way because fuel came spray/flooding out while another friend had a sparkplug out and was testing it for spark!! (luckily he was not harmed).
After this it has not started. We did get the injector back in all the way, and waited to work on it figuring it was flooded and that time would work. Next was the fuel pump, yay i can hear it now, boo still didn't work. Now car clicks. Ok, starter out, tested THREE times at advance auto, and once at napa. They both say it is good. (I have my doubts though, it sounded slow to start up to me). Battery is also tested, bad cell. Checked flywheel, Put starter back in and new battery with 625 cold cranking amps. Car cranks now, but no start. Clicking noise when crankshaft turns.
Q: Do the engine is still flooded?
Q: Did the flooding foul the new spark plugs?
Q: WHY is the crankshaft clicking?
Q: WHERE is the nearest cliff?
View 6 Replies
i have a Subaru legacy rs 1996 twin turbo, about 6 months ago now i replaced both front outer CV joints and boots due to a grinding when turning at slow speed e.g a car park. the grinding had gone and its was all fine until now the same grinding as come back. its it normal for the CV joint to wear out that fast or could there be a different problem?
View 5 Replies
I've got a 2008 santa fe limited 3.3 awd with about 170000 km on it. Lately when I brake I've been hearing a clicking noise coming from what sounds like the driver side front wheel area.
Had it in to my mechanic who checked the brakes and said that pads/calipers/rotors were all fine. They replaced the passenger side front bearing on the lower control arm a few weeks ago and said there is no play or noise coming from any other suspension components.
Where to look next? My mechanic isn't sure what it is so I was going to take it to the dealer and see if they can fix it. Also had new tires installed about a month ago
View 7 Replies
I've got a 2002 subaru legacy wagon, 150k miles. Over the past year or so (a real guess, can't really remember when it started) it's developed a wowowow noise that happens when turning. The car has to be moving - just turning the steering wheel while stationary does not make any noise. I can't tell if it's only coming from left or right side of the car or the front or back. It also doesn't happen when driving in a straight line. The wow's are faster when the car is going faster but the frequency is very roughly 4 per second at 40 mph. The noise itself is pretty low and grumble, and kind of sounds like James Earl Jones saying "wow wow wow wow".
View 19 Replies
I have a 99 Subaru Legacy Wagon with just over 196,000 miles in it. Over the past few days I have had a noise coming out of what seems to be my right front wheel. It is a clicking sound that increases with speed, and is only when I turn and have my foot on the gas. Other than the noise there seems to be no other symptoms.
View 5 Replies
Just wondering if it's my car or does Subaru have a light issue going on with the 2011 Legacy's??
I bought my car 1/31/11 (so I'm still under warranty... barely) but here is my history with bulb replacement:
3/22/12 -- 14,251 miles -- driver side headlamp out
6/27/12 -- 17,322 miles -- passenger side headlamp out
6/19/13 -- 27,783 miles -- driver side headlamp out (although was taken in for a passenger side, side marker light)
7/16/13 -- 28,987 miles -- passenger side marker light out (the one that they didn't replace on 6/19/13)
1/22/14 -- 33,759 miles -- driver side head lamp and side marker out
Six bulbs in under 3 years???? Granted these have all be replaced under warranty but the next one won't be despite the fact it's an ongoing issue and that concerns me. I know I'm spoiled because I had a 2002 Honda before the Subaru and in 12 years (mom is now driving it) and 100+k miles I've replaced 1 burnt out bulb.
View 1 Replies
2011 Hyundai Elantra, 42k miles. The car is my girlfriends which I drive once every few weeks. Yesterday I noticed a rumbling noise coming from the right front tire area. The noise only comes about when turning a fairly sharp left while above 20 mph. Taking a left onto a side street etc doesn't cause any noise, but taking one while going through a big intersection etc. Where the speed is up a little bit causes the noise. The tires are original, obviously not new, but they still have a decent amount of tread left on them, they're Continental Pro Contacts.
Tire, ball-joint, brake pad rubbings? I'm going to take it to get looked at tomorrow, I did spray the area with a hose in case there was something caught in there, but that didn't change anything. The tire looks fine, no abnormal wear or bulges, the car is in alignment and makes no other noise except in the circumstance noted.
View 2 Replies
I posted in this thread originally: [URL] .....
But today I had my wife drive the car and take some slow left turns while I listened so I could get a better idea about what the sound was and where it was coming from. From inside the garage and in the car, it sounded like it was coming from the rear but I now know it's coming from the front passenger wheel and it is not a "grinding" sound at all, it's more of a tick-tick-tick/click-click-click sound.
Applying brakes doesn't change the frequency or quality of the sound, but speed does. The faster the wheel turns, the frequencly of the ticking increases. It doesn't appear to tick/click only once per revolution, it clicks a number of times throughout the rotation and at some points during the rotation it clicks more often than others. Like, tick.... tick... tickticktick...tick...
When going straight there is no noise, turning right, it sometimes might click once or something but it doesn't really happen turning the other way. I've looked at the dust shield around and even tried bending it back a little bit in case it was making contact when I thought it was more of a grind but nothing looks out of place and nothing has been done to the wheel recently other than putting new rims on a couple of months ago.
Wheel bearing? I thought a bad wheel bearing would make noise no matter what direction you're going and pretty much constantly. CV? I thought CV ticking usually only happens at full lock but it ticks even on not so severe turning. Fender liner doesn't appear to be touching the tire, and the car isn't dropped and is AWD so there's plenty of clearance.
So, is this a trip to the dealer? I'm only under powertrain... not sure if something is up if it would be covered. I think wheel bearings are, but not sure about other suspension parts that might cause this.
View 14 Replies
Noticed a clicking noise when only turning left out of a parking lot today? What this could be? Sounds like it was coming from the driver side front wheel?
View 2 Replies
I have a 2001 Subaru legacy outback station wagon that is making a rotational squeeking/screeching noise from a passenger side wheel (haven't determined which one). I hear the noise when I am going slow, below 20 mph, though I can't tell if it is still making the noise at higher speeds. It stops completely when I apply my brakes. The brakes and tires were replaced within the last 3 months, this noise has been occurring for much longer than that.
View 3 Replies
My outback has 57k miles on it and already needs the front struts and rack replaced (diagnosed today at the Subaru dealership). The car has been making a whining noise in the engine and has been clunking when making turns for the past week. I have also noticed it hasn't been taking bumps as smoothly. They told me that both ends of the rack are leaking and both front struts are leaking. My husband did admit to hitting the curb on the driver side front tire pretty hard while making a u-turn about a month ago, but all other driving is pretty standard. Yes, we drive on dirt roads in the mountains a few times a year for hiking, but don't drive in a manner that I consider wrong. Did the u-turn incident cause this? (hard to believe that would affect both sides of the rack and struts).
View 2 Replies
I have a '95 Subaru Legacy L Wagon AWD 5-speed manual shift. There a new noise that seems to be coming from the front half of the car. I can't really describe the noise, but it only happens when all three conditions are met. If they are, the noise is continuous.
1.) The car has to be in gear--not neutral. But it doesn't matter which gear. I tried revving the engine in neutral, but nothing happens.
2.) I have to be accelerating on the gas petal. If I let off the gas--even if the engine and vehicle speed haven't yet dropped--there's no noise.
3.) Engine speed needs to be at or above 2,000 RPM. It gets louder at higher engine speeds, but it's pretty much proportional to the "normal" noises at higher speeds.
What might be causing this?
View 7 Replies
What would cause the vechile to die randomly, while driving? have check all ground wires, coolant, spark plugs, air filter, and changed fuel filter. no check engine lights come on.
View 2 Replies
I am getting a click from the steering when rocking the wheel left or right. It is coming from the assembly the intermediate shaft is connected to. I see there is a large bearing on the end where the shaft comes out. I am not sure what this assembly is called. I have had it at the dealer and they said they re-torqued everything but they could not duplicate it.
I do not fall in the range for the recall and I have no problem with the car pulling left so I do not think it has anything to do with the intermediate shaft. It is clearly from the assembly the intermediate shaft is connected to on the steering wheel end of the intermediate shaft. 2011 limited
View 13 Replies
I just replaced both front strut mounts on my 2005 Outback 3.0L. I was 100% sure that it would resolve an ongoing noise/rattle in the front end when driving over bumps and generally rough roads. It worked with some of the noise because the strut mount bearings were shot. But much to my disappointment after putting everything back together I still have a rattle (more like the sound when you shake a shoe box with a tennis ball inside it) in the right front suspension somewhere. When lifted the right front wheel is solid with no wobble left to right or top to bottom so I"m thinking it is not a tie rod but I am not a professional mechanic. Should I take the right front strut back off and check the new mount or is there an easier answer.
View 3 Replies
I noticed a low humming noise lately on my wife's 2007 Outback which started at around 40 MPH or so. I thought it might be something with the added roof rack attachment or tires which are Michellen Rain Force tires installed about a year ago. It sounds like an aerodynamic issue to me. Nothing has changed on the roof racks and the tires show no sings at all of unusual wear.
I looked in front of the vehicle and underneath to see if I could see something and noticed the cowling immediately under the exhaust manifold and where I removed the small door for frequent oil changes is bowed down in the rear creating a scoop which I think is the humming noise. I am trying to find the darn door in the garage so I can re-install it, but it got me thinking, is the whole cowling even necessary to have under there?
I know it can prevent rocks and things from hitting the underside of the engine, but is it really more for simply aerodynamics? It is a pain sometimes working underneath because it blocks access to everything. I was thinking of simply removing the entire contraption.
View 5 Replies
I have a 1996 Subaru Outback. There is a strange noise emanating from the center/front of the car. It only occurs when I stop accelerating over the speed of 50 mph. It sounds like a combination of a marble rolling around in a coffee can and a baby rattle. No sound at lower speeds or when I accelerate.
View 2 Replies
