Accent LC (2000-05) :: Grinding / Squealing Noise When Braking After First Start In Morning
Feb 24, 2014
Recently I've noticed more that when we first start the hyundai in the morning or after sitting a while and we use the brakes it grinds/ squeals a little and then doesn't after about 2 or 3 miles. Is this something to get checked out or should I spray something on my brakes to lubricate?
My next step that I though of was to get a simple automatic car wash cause it's been a bad winter in Rhode Island and the street shave been flooded with rock salt. I figure that might cause some friction under the pads.
View 1 Replies
Advertisement
I have an 02 Passat GLS. Its seems that when uts really cold out and I got to start my car in the morning it lets out a squealing noise. I just had my engine serviced so I doubt its any of the belts but I dont know for certain. Any VW buffs out there who know?
View 1 Replies
I have a 2003 Accent with 30,000 miles on it... It is making a variety of noises right now but the latest and loudest is that when I am backing out of parking spot or something like that it makes an awful squealing noise... What that might be?
View 2 Replies
Having an issue w/ my 00 550. When I lock in the hubs there is instantly a noise, More of a squealing then a grinding. The truck goes in and out of 4x4 no problem and the noise is there locked in 4x4 and not locked in, as long as the hubs are locked in. I can't tell if the noise is coming from the 4x4 driveshaft but there is no noticeable play in the u-joints or the u-joints in the front axle. I did notice when I spin the 4x4 shaft by hand the passenger side joint spins slower then the driver, not sure if that's normal or could be the problem.
View 2 Replies
My Variant (2007, 48K miles) is experiencing a squealing noise during cold morning (below 45F) start ups? AC always off at start up and the noise goes away once the engine is warmed up. I brought it to the dealer last week and after leaving the car over night they told me the noise can't be duplicated which is a total BS. [URL].....................................
View 12 Replies
When decelerating and braking, there is a strange clicking noise, and it seems to be coming from the brakes in some way on my 2002 Accent. It does sound like a metal clicking. Steering doesn't affect it, it happens on a corner or on the motorway. The only way to stop it is accelerate. The clicking is faster when the car is going faster, and slower when the car is going slower. The brake pedal isn't vibrating or anything, and I cant actually feel it.
I am certain this is a braking issue as it only started just after I got new brake pads about 2 months ago. It is not transmission related or anything like that. I have had some suggestions about axle's and CV joints but I doubt it's either of those as they are in good condition, and as I said, this started directly after having new brake pads installed!
View 5 Replies
So I have a 2000 Hyundai Accent, 1.5L with an automatic transmission. I'm hearing a grinding noise when I'm driving. It gets faster as the car goes faster, but the engine RPM has no effect only the speed of the car.
I got new tires, changed the CV axle shaft on both sides, and I also changed the front struts as I was told that one of the struts was bad the last time I took the car for an alignment. None of that has had any effect on the grinding noise.
Then I jacked the car up on both sides and let the wheels spin, and the grinding noise is present that way as well. Then I jacked up just one side at a time. When the driver's side wheel is spinning, the noise is audible, but not when just the passenger side is spinning.
I then disconnected the brake caliper from the driver's side and held it up with a tie wrap to keep it out of the way. The noise is still audible when the wheel is spinning, so it's not the pads or a clip or anything like that.
So now I'm down to a couple of ideas.
1) Wheel bearings
2) Something is hosed in the differential or transmission. I'm guessing that the differential is more likely, as the transmission should effect both sides the same, right?
I'm going to check the wheel bearings now, though to me it seems unlikely to be the problem.
View 10 Replies
There is this incessant squealing and grinding coming from my brakes. I have taken my 2010 Hyundai Accent to FOUR different mechanics and none of them have been able to figure out what is wrong with my brakes. I have replaced all of them and each mechanic has cleaned and adjusted them. But THREE days after, every time without fail, it is back as bad as it was before. It is only the rear right brake drum that is doing it still and I have no clue what to do. Something is definitely wrong with this car.
View 3 Replies
2001 1.5 Accent. It has not been starting consistently for the last few weeks. Ive had to use the jump box on it a few times and that worked.
The other day (cold day!) it died at the stoplight after driving for about 20 mins. It made a grinding crunch sound from under the hood as it died. After several attempts on jump box it fired up and ran again for about 15 seconds and died and made sound again.
This repeated itself a few times before I got it towed home.
I removed alternator and it tested good (PASS) at two parts stores...testing 3 times each.
Battery has about 14 volts at the posts without having charged it after event.
What would cause the car to die and make the awful sound? And why would it appear to need a jump start?
I was thinking alternator but.....
View 12 Replies
Noise sounds like its coming from driver's side. It's not terrible until you hit 30-40km/h, after that its quite loud. No whistling sounds, which i was told to listen for if it were a wheel bearing (although I ma not convinced is the only sound a warn bearing makes).
The sound sometimes goes away when I am on a bend turning left (taking the weight off the drivers side wheel).
View 6 Replies
So I had all of my belts changed including timing belt and tensioner pulley as well as an oil change. After, I noticed a weird pulsating grinding/wining noise coming from the engine bay. It only can be heard once the car is warmed up. (It is much louder in real life.).
Car Noise - YouTube
View 1 Replies
Yesterday I was driving home and my clutch started acting up. To start I was unable to press the pedal. The pedal was super hard, then let up but didn't feel right.
I removed the slave and the pedal went down fine. Both the master and the slave have no leaking and fluid levels are good. I haven't been able to have a buddy look at the levels when I press the clutch, but....
Here is a little more, the car shifts fine with the car off, it goes into all the gears, but with the car on it will not shift into gear. Also there is a light grinding noise when I let the clutch out..
I ordered a clutch kit already, but don't want to pull the trans if I don't have to, I would love to hear the issue is with the master or slave.....
2005 Hyundai accent with 138,000 miles
View 4 Replies
I own a 2005 Hyundai Accent 1.3 SOHC and a while ago the front right wheel started to make a grinding noise, problem was related to the brake system..
So far I've tried replacing the rotor (disc), repaired the caliper (using a rebuild kit), replaced hoses (both), and event the master cylinder.... and the problem persists, it actually came to the point that after driving a while the front wheels will get stuck.
I've followed all the directions from the service manual and it still got the problem...
View 14 Replies
I have a Hyundai-Accent 1.5 GL, Auto, year 2000 car. I bought this 4 months ago and ever since it has been giving the check engine signal. However, running conditions of the car has been normal and therefore, I didn't worry about the check engine signal. Now, the engine is rough idling for few seconds when I start the car in the morning, and then it comes back to normal.
View 12 Replies
My G1 prius (2001) started making a grinding noise when I start it up in the morning. There are no warning lights (yet) and it drives fine, but that noise can't be good -- something will fail shortly. I've searched the internet quite thoroughly and there was one similar problem reported, which ended up being linked to the ABS pump. The noise seems to come from the inverter, or somewhere under the inverter. I took a video of it and posted it here.
View 19 Replies
My Phaeton 2004 3.2 V6 makes a really bad squealing noise when they are warm and the car is just coming to a stop, even if I am only braking slowly. Had VW check the brakes and all they did was to take out the pads, clean them and replace them. Then had the rear discs and pads replaced and it still occasionally does this. Is there something I am missing?????? Who wants to drive a superb car like this and have everyone look at it for the wrong reasons!! Wheel Bolt Torque Specifications (TOC)...
View 19 Replies
I have a '02 Accent with a 1.6L. Over the summer the A/C blew ice cold. I changed all the belts and after a few weeks I noticed that whenever I turned on the heat or A/C the car squeaked. After that I saw that the compressor would stop spinning whenever the squeaks happen. I sprayed the pulley and clutch with silicone spray and it worked great for a day then the same problem again. Eventually I snapped the A/C belt, replaced the idler pulley, and the tensioner bolt but still the same problem. What it could be?
View 1 Replies
2000 GTI MK4 200,000 miles
I have had a grinding noise during engine start up for a few month but had no problem is engine starting up so left the grinding noise problem untouched.
About two days ago both lowbeam headlights blew up and left signal blinker on headlight lamp cluster didn't turn on while rear left blinker blinked at twice faster speed. At the same time I began to have starter motor stall while starting up the engine!
Wonder if this is a problem involving solenoid as well.
View 10 Replies
I have about 83k miles on my Accent. It was undriven for about three months due to a blocked situation with the local Department of Transportation. I've changed the oil and he seems to be driving fine, but right after starting the car, there's a squealing that comes from the engine block as I apply pressure to the accelerator. The sound goes away after a minute of acceleration, upon breaking, or after driving for a while. Also, when shifting from reverse to drive, the steering feels a little stiff. Is this a loose belt problem? Do I need to replace said belt? Or is there a more extensive problem with the power steering pump?
View 11 Replies
I have a Toyota Corolla with 78K miles and when braking, a squealing noise came from the back when braking at low speeds. So I figured it was worn brake shoes, I took it to the mechanic but he said both the front and back brakes are good. I had him change both front and back anyway.
Now the squealing noise is gone but there is a still a noise...it sounds like the drum is rusted. It sounds like the noise in this video: [URL] .... (48 sec mark)
Do you think it's the drum or something else? How much would changing the drum (both sides) cost? Do I need to get new brake shoes also?
View 4 Replies
Since the weather got colder I've been getting really loud, squealing belt noises. They happen mostly when I turn on the car. They sound like when I had an old Altima and turned on the A/C the belt would squeal. But the sound happens even with no air turned on or defogger turned on. And it happens sometimes when I make a really sharp turn around when I first start the car. After it's warmed up I generally don't hear it. Also, sometimes having my foot on the brake will change how long the sound lasts for. I'd like to know what belt this would be and if just WD-40 should be used for now (or some type of belt dressing) OR if it's detrimental not to get work done on it. Also let me know if I'm able to tighten it myself or if that's better left. I replaced a valve cover gasket a few months ago so that's about the extent of my abilities at this point.
It's a 2003 Hyundai Accent Automatic...
View 5 Replies
