Camry :: 2004 - Accelerator Unresponsive / Pedal Has Stopped Working
Aug 15, 2015
So I done some routine maintenance on my car today as I have had it just over a month. Done the oil, filter, thermostat and coolant today. This is the 2azfe, 160,000 k's.
As the title suggests, the accelerator pedal has stopped working, but I'm pretty sure its something I have done. I noticed the idle was a bit strange at times when warm, from third to second gear changes the rpm would jump up to around 1200 rpm, but if I changed from 4th to third gear the rpm would drop down to normal idle. So I decided to try clean the throttle body.
I had done this before on our 5sfe's which we no longer have. All I done was disconnected the air intake hose from the throttle body and sprayed some TB/carby cleaner in. On the 5sfe I could run the engine with the intake pipe off and I tried to on this too. It started and quickly stalled. Ok no big deal. So I put it back together and restarted it ok. It run fun. I gave it a few rev's via the engine bay throttle control and it revved ok. I never thought at this stage to check the accelerator peddle itself. Wasn't until the me n the family went to go somewhere I realised I had no throttle. Strangely, with the engine off I noticed the engine bay throttle control seems a bit notchy.
Anyway, tomorrow I'm gonna disconnect the battery to reset the ECU, and check fuses. Could the throttle bottle/carb cleaner have affected a sensor somehow? There was no problem before I done this so I know its self inflicted.
View 1 Replies
Advertisement
I have a 2005 Jetta 2.0L (MKIV, of course) that has been giving me some trouble lately. Very seldom while driving in the city I'll notice that instead of shifting up, the car will lose power and the accelerator becomes unresponsive. Until lately this only happens for a second or two before things go back to normal, but I just got home from work and it seemed like the engine stalled.
I was going about 40 mph or so and suddenly the accelerator stopped responding, but I looked at my dash and the battery light was on. As I pulled over and attempted to slow down I found that the brakes were also very tight. Eventually I came to a stop and restarted the car, and the rest of the drive was uneventful, but it's got me worried.
I've had a couple of CELs pop up in the past so I invested in a VAG-COM reader. I just read the codes and here's what I got:
16804
18613
00529
Is this a transmission problem? Are these codes indicating separate issues or are they all connected?
View 2 Replies
Took it to the dealer today to have the seatbelt replaced, which they did. As I was leaving the lot I noticed the airbag light was still blinking so I went back. Tech brought out the OBDII and ran a scan. No errors. Went through all menus and cleared everything only to realize his OBDII had the wrong 'code card' in it. So he went and got the right card and came back, ran it again, still no errors. Went through all menus again and cleared everything including what he called an old error but not one related to the airbag. As he was walking away to go get his manager the light... just went off on it's own. (Think it was mad at the tech, NOW I know why.. then I didn't.)
On the way home, on the highway, in Texas, going uphill... the accelerator suddenly becomes unresponsive. The car starts slowing down, 65, 60, in a 70 where everyone passing me is doing 80... So, I goosed the gas, revved it over 4k and ... the gear shifted and the car sped up... WTF?! Now this car ONLY has 83k miles on it. It was mint. No problems AT all, ran smooth as butter until I let the dealer touch it. NOW, it drives like gramma's jalopy and I can't for the life of me figure out what the heck the seatbelt has to do with the other issue but THAT drastic of a change is NOT coincidence.
View 1 Replies
Here are the basics:
1. Suppose I come to a dead stop or a rolling stop and I continue keeping a small or very small amount of pressure on the accelerator. When I try to start again gently, there are two outcomes: (a) the "hesitation" or "no or dead throttle response," when I had added only a small amount of pressure, or (b) a "lurch" when I add more pressure to counter act the hesitation!
2. On the other hand, if I come to a stop or a partial/rolling stop, and remove all pressure from the accelerator before I start again, it seems I can start from a stop normally, both gently and under control. I have been experimenting by being certain there is no accelerator pedal at all prior to any start from dead or nearly a dead stop. That isn't, however, a fail-safe approach because of various driving conditions.
But, even if that provides a partial remedy, there is still a problem because this isn't the way the accelerator should work. It should not take all that learning, adjustment, and counter-measures to drive safely.
I certainly agree with the another poster: either of the two results of this: the "hesitation," and/or the sudden "lurch," could put the truck in a dangerous situation. I already have experienced this near chaos a couple of times.
So, is this problem continuing to appear on 6.7 2011 Fords, and, if anyone has a 2012---has this problem appeared on the most recently built Fords?
View 14 Replies
My wife was driving our Odyssey yesterday approximately 55 mph when the accelerator "all of a sudden" stopped working. The engine was running, but the car would not move. Stranded in the middle of the highway, she turn the car off and back on. The accelerator worked long enough to drive another 8 miles. We changed cars and I started the Odyssey and backed out of the parking space and put transmission into drive. The accelerator was all the way down to the floor, but the car would not move. The engine was on, but was not revving with pressure on the gas pedal.
Hauled the Odyssey to the dealer. Technician started the car and pushed the gas pedal to the floor with no result...and then the car lunged forward "all of a sudden." Technician and Service rep said "We have never seen this before." They kept the Odyssey to check it out. So, do they really know what's going on and just aren't telling me?
View 6 Replies
I have a 2004 Camry. A few months ago, the LH headlight stopped working. Thought it was the bulb, but wasn't. High beams work, DRLs work, socket good, contacts good. But, when I tap on the headlight cover, the low beam comes on, and stays on. What's going on here?
View 4 Replies
A few days ago my speedometer stopped working. Then yesterday all of my gauges stopped working, as well as my turn signals. If this is a fuse issue then which fuse it is?
View 9 Replies
Yesterday the Check Engine light came on, the code was P1121 Accelerator Pedal Position Sensor Error, Performance/Range. I have not yet had the pedal replaced related to the recall (bad me), is the sensor incorporated in the new assembly or is this separate and I'll need to replace it?
View 19 Replies
My 2004 camry LE (235K miles) has had a noise associated with the blower for several months. The blower worked fine on all settings but had a subtle noise that was between a purr and a click. It's constant, fast-paced, rhythmic and rises in pitch as the blower setting is changed. Hot or cold settings don't make a difference. The closest I can approximate is the sound made when kids put (or used to put) playing cards in the spokes of their bikes.
However in the last couple months the blower has stopped working intermittently. Sometimes it will come back on if I went over some railroad tracks or a hard bump. If I turn the car off the blower may not work when it's restarted. The last couple days it's stopped doing even that, and since there's snow on the ground it has become an issue! The fan setting doesn't make a difference, high or low.
View 4 Replies
Its a 2005 model with 45000 miles on the clock, so low mileage for the year. The problem with it is the engine starts up ready fr a journey, and as soon as the accelerator pedal is pressed, the engine cuts out.
View 7 Replies
Sometime the car is fighting to move forwards when I start to depress accelerator pedal and it sounds like "click click CLICK..." the sound changes from lower to louder depending on how I depress accelerator pedal... (like the car is trying to hard to move)...
View 3 Replies
Engine runs fine. The pedal is unresponsive. Car will sometimes full rev when taking foot off the break, will sit at idle at other times (no indication as to when or why)
List of codes: 420, 38, 141, 226, 2133, 2128, 223, 121
I know some of the codes are from when I had a cracked ignition coil and moister caused misfiring which lead to something wrong with the cat.
Here's my main question. After everything I've read I've boiled it down to two things to try. There was one obscure post about the break light switch causing similar problems and everything else points to the ECU. I checked my O2 line for damage as that is what seems to be the most common problem of shorting out the ECU and it looks and feels perfect. So I took my ECU off, just to have a look, and the driver side plug seems to have corrosion. This was an immediate red flag, but I have found ZERO information on it. I don't know if I'm looking for the right thing or what. SO, ECU corrosion, break light switch...
View 2 Replies
I have a 2001 Elantra with 126k miles. For months it's been randomly hesitating, meaning I'll be riding along and suddenly the gas pedal will do nothing...then about 3 seconds later, VROOOM, the gas pedal will start working again. Recently, it's started stalling as well.
I've already replaced the MAP sensor, input speed sensor, throttle position sensor, spark plugs, wires, and coil pack. Nothing has worked, but it is getting progressively worse (it stalls more frequently, and the gas pedal becomes suddenly unresponsive more often).
View 6 Replies
i have a 04 ford excursion 6.0 with the egr delete, was stopped at a light to make a left turn, when i stepped on the accelerator pedal nothing happened as the engine was just idling. i pumped the pedal around 10 times and finally got the engine to rev up. i just got this excursion and don't know to much about the maintenance on it. i am going to drain the water and change the two fuel filters. my neighbor is familiar with diesel engines and he said to look at the throttle sensor. i have run this engine up to 900 miles and it has started and run perfectly. i believe the usual maintenance like oil changes etc were done on it. would any error codes show up even though no warning lights on the dash.
View 8 Replies
I have a 1997 F-250 7.3 powerstroke diesel with 135,000 miles and an EO4 automatic transmission. The trucks engine light will come on and the fuel pedal will become unresponsive. Until I release the pedal then reapply pressure to it the truck will remain at an idle. Sometimes I can tell it is going to happen as the shifting of the transmission at low speed will be irratic, shifting quickly into third at very low speed and RPM. I also have noticed that the light for the OD on the shift handle will light up at the same time the failure happens. I have a local mechanic that is familiar with the 7.3 engine and he cannot diagnose it unless it is failing in the shop. It only does it while driving, and the failure goes away as soon as I release the pedal.
View 4 Replies
I bought a 2004 F250 super duty 4x4 with the 6.0 a couple weeks ago and have a few questions. Hopefully all of these things are normal, but I thought I would ask you experienced drivers.
1) Occasionally while driving when I lift off the accelerator pedal I can hear a sort of loud rattle under the hood. I assume this is the turbo shutting down? Is that normal?
2) 4x4 and locking hubs... I have the 4x4 hi and low switch on the dash. Do I need to also manually lock the hubs to go into 4x4? After reading the manual it seems like I can just turn the dash switch and they should automatically lock, but I'm not sure. The hubs are not marked, but going by the pictures in the manual I think I know which is "lock" and which position is "auto" or off.
3) Front wheels hop at full turn. I expected wheel hop in 4x4 or with the hubs locked, but even in 2WD with the hubs in the auto position the tires still "hop" or knock a bit at sharp turns. Is this normal?
View 2 Replies
I have a 2007 subaru outback ll bean addition with 67,000 miles. For the past year and a half my gas pedal has intermittently become unresponsive. The engine is running just fine but the check engine light and cruise control light start blinking and boom-no gas. After turning off the engine, the car won't start until the gas pedal has magically started working again. The dash lights continue to blink for several starts but then stop.
Prior to this problem, I have noticed that sometimes the console lights for the radio and AC blink and sometimes go dark at which point the controls are ineffective. As if this wasn't enough, just yesterday when trying to start the car, the engine was having trouble turning over with a rapid clicking noise. It eventually started but now the seat belt buckle alarm is out of whack and the speedometer displays "ER U1."
View 10 Replies
I have a Camry at 120K now. Front brake pads was placed at 85K and was told by the maintenance person at that time that brake rotors couldn't be resurfaced since they were close to the minimum thickness.
Braking seems still fine these days. I don't hear any high-pitched noise or feel obvious vibration/pulsation when the brake is applied. The brake pads are still within a good range of thickness as the last check was made a couple of months ago.
But the brake pedal is softer than before so that now I have push harder to get car stopped. It that a warning sign which indicates it is time to replace the brakes rotors and pads?
View 1 Replies
I have a 2004 camry 2.2L with 97,000, automatic. Yesterday it would start but had no acceleration and CEL. SO towed it home and scaned and got P2101, which said low accelerator motor. SO I cleaned the throttle body and everything was good and reset code. This morning same thing happened...it is around 18 degrees outside. After it warmed up outside no problem and no CEL? WTF? Obviously I have a problem with the throttle body when it's cold. What to try next?
View 9 Replies
I have a 2006 Camry and about a month ago the key FOB stopped working. I figured 6 years old it probably needs a new battery. Changed the battery and it started working again for a couple days then stopped again. Tried about 4 different batteries that worked on other cars and they would not work. I try it every time I go to the car, and at first it would work about 1/2 the time, but worked less and less. Until it just wouldn't work. Now it will on rare occasion work again, even tried changing batteries again.
View 3 Replies
I have a Galaxy S5 (Android 5.0) phone that I've paired with my 2014.5 Camry SE and it generally works fine for playing audio, making calls, etc. But I've found that if I turn the car off while Bluetooth is connected, and then come back to the car shortly after, my phone is basically locked/frozen for a couple of minutes. The bluetooth connection light shows up on the Camry touch screen and I can select and play other audio inputs, but my phone is completely unresponsive and for all intents and purposes looks like it's shut off. After 2-3 minutes the phone will reboot itself and after it starts back up I'll get the 'Phone disconnected' on the audio system touch screen. At that point I can unlock the phone, re-enable Bluetooth and it connects/works fine with the car.
I originally thought it was a problem with the phone, but after some hard/factory resets and OS updates, it still does the same thing. Additionally, I cannot recreate the issue with the phone when it is paired with our other car (Honda Pilot) if I replicate the same sequence of events, so I'm assuming it's something to do with the Camry's bluetooth/audio system.
View 1 Replies
