I have searched online for a week a now and I can't find a simple description of wiring scheme for the factory radio. I have remove it and I am try to install an aftermarket unit. I count 22 wires coming into the factory unit and I cannot assign a function to all of them.
View 14 RepliesWant to upgrade my factory non entune radio 57076 to the factory entune radio. what model number radio am I looking for and will I encounter any issues with data for fuel and tire pressure sensors.
View 3 RepliesI have an 09 Camry LE. When driving, the volume is consistent until I begin braking. It then lowers the volume itself. When I accelerate, it ramps back up.
Also on the highway, the bass is excessive. I usually turn it down to -1 or -2 depending on the track. The car is completely stock. I've had the car for a few weeks now.
This is the only factor that may lead to me replacing the stock radio. I don't want too, but if this problem can be solved by that, than I will.
I've been having trouble with the stock radio in my 2011 SF. It randomly turns off, then turns back on by itself, 5 to 10 minutes later. It comes back on in whatever mode/ station it was on when it turned off. I've pressed every button, tried to insert a cd, and tried the steering wheel buttons. The USB power goes off too.
The station memories stay, so I don't think it's a power issue, at least at the fuse level. The battery is fairly new. I've cleaned the fuse and both ends of both ground wires in the engine bay. When I cleaned the fuse, I lost station memories, is there two fuses for the radio, perhaps? Or does the memory power and radio power split after the fuse box?
have a GPS and don't use Sirius/XM anymore. I've read part of the radio/ nav system sticky, wow, is it long.
At least once a week, only the FM band appear on my factory nav. My sat 1, sat 2, and fm2, and am1 band all dissapear. I have to turn the car off and back on to get everything to work again.
The cars currently in the dealer for an other issue and they are looking into this one also. Seems not much is going to happen as it's unduplicabale. I even showed them the videos I have take of it happening. Call VWOA and they said they will look into it.
I had the sirius module replace once, new firmware twice, and in the dealer another time and they couldn't replicate the issue.
Have a factory touch screen radio (not sure which one it is) no Navi, but its a 2010 Passat, mine sounds like crap, especially when playing though an IPOD. Put the same music on an SD card and it sounded much better. I literally have only had the car less than a week, and am contemplating going and taking out all the speakers and replacing them with aftermarket stuff.
View 3 RepliesHow to install an amp to the factory radio?
View 14 RepliesI got a OEM GPS,TV,DVD,BLUETOOTH, iPod controller ALL-IN-ONE device and donot know how to install. My car is 07 passat and I read a thread showing 2006 Passat Radio Removal Write-Up... If I wanna go further, what else I have to remove so that I can do more wiring jobs.
View 5 RepliesI am in need of a wiring diagram for a 00 ex with factory auto dimming rear view mirror. It only has 3 wires and I think I have them figured out but would like to make sure before making a pigtail to install a mirror I have that has 6 wires.
View 7 RepliesSo my son cut the factory speaker wires on his Explorer. I bought a new radio for him prior to the "CUT" and the new radio comes with a simple wire harness (2 green, 2 purple, 2 white, 2 grey). The picture shows the factory wires attached to factory module. The "New" speaker wire harness identifies which wire is for what speaker but I need to know what factory speaker wire would attached to the new wires. Based on the picture, how to identify the speaker wires and determine which wire goes to which speaker?
View 1 RepliesPlain and simple. 97 F150 with factory radio and cd changer. Just wanna know what wire to cut on the factory harness to make the radio not dim when I turn on the headlights. Or is there more to it than that?
View 11 RepliesAdding a sub and put it under the front seat? I know a lot of people put it under the rear but i don't want to sacrifice cargo carrying space under the fold up seat in my 2012 Supercab. I was considering a Kicker 8" Hideaway. I don't need pounding base. Just more base.
View 1 RepliesWe have the basic stock CD / radio model number A518A1 and the XM Radio module with the fit kit installed in the passenger side wheel well in the trunk in a 2010 Corolla S.
Installation of the XM Radio & fit kit was dead simple and we're using the built-in OEM antenna on the roof of the car.
The problem we're having is the dreaded NO SIGNAL message when trying to listen to XM Radio.
I have the Lynx portable XM Radio installed in my car and when both cars are in the driveway, I can get the signal all day long and in her car she gets the NO SIGNAL message.
We've already called XM Radio and had the signal resent to the radio numerous times with no success.
I've gone to our Toyota dealer and the only thing they can recommend is to replace the OEM roof antenna. That part alone is $80 and you have to completely disassemble the headliner to get at the antenna.
Wiring up an actual XM antenna to take the place of the OEM roof antenna? I've searched the web and can't find an adapter plug.
Today while driving around on the back roads the radio signal faded in and out quite a bit. I don't remember it happening before like that. I was curious if a Pioneer head unit would have the same issue due to using the same antenna or if it's just the factory head unit causing the bad reception.
View 5 RepliesMy factory radio will not work. The person who had the truck before me installed an after market radio and it works fine, but the factory radio will not power up when I plug it in...is the radio shot or is there a way to fix it.
View 1 RepliesMy dumb self cut my factory harness to install a radio and after hooking up said radio (which I know how to do) it popped a fuse. So to avoid any trouble I need to put another harness in but again with my stupidity I cut the wires too short. finding the correct harness
View 2 RepliesMy Camry is 2007 XLE model with JBL sound system (radio + separate amplifier). As the previous owner installed shitty aftermarket radio and nav, I've decided to remove it.
I've installed new JBL radio bought on Ebay ( I presume this is 2009 or 2010 radio). Everything ( radio, cd changer and bluetooth) work fine except the AUX jack.
Why the AUX does not work. I've tried the radio test menu, and it shows all the time, that AUX is not connected. However I've checked the harness and it is fine ( from AUX adapter to radio, according to camrystuff.com).
Maybe my new radio does not use AUX any longer, but something has changed, like USB has been introduced, instead of AUX, etc.
As I understand the radio is on the rear window of the car and every time i listen to the radio and turn on the rear defroster I get static and I can barely hear the radio. Is it possible to buy a different antenna and mount it somewhere else instead of using the one on the window?
View 5 RepliesI just purchased an 07 Camry LE. The dealer was sloppy in detailing it, and while spraying the dash, got fluid behind the radio lens, which now has run marks on the back. I need to remove the radio lens safely, The lens moves around a bit, so I think it should be able to be removed.
View 11 RepliesI'm having problem on my camry 07 lights I checked the fuses under the good and under the steering wheel but everything seem fine...
View 4 RepliesI have a 2007 Camry XLE with a four cylinder engine. Noticed radio and clock quit working. The radio screen is blank. None of the buttons work. Popped hood open to check fuses and noticed corrosion on positive battery terminal. Cleaned battery terminals up and still nothing on radio and clock. Everything else seems to be working correctly. Checked smaller fuses for radio1 and radio 2. Checked all other small fuses in engine compartment and under dash. Still not working. I also pulled battery out and had Oreillys check it. It was good. Not sure what it could be.
View 9 Replies