I got a OEM GPS,TV,DVD,BLUETOOTH, iPod controller ALL-IN-ONE device and donot know how to install. My car is 07 passat and I read a thread showing 2006 Passat Radio Removal Write-Up... If I wanna go further, what else I have to remove so that I can do more wiring jobs.
View 5 RepliesSo I bought a pair of the WinPower headlights and I can't find any posts of a How To remove the factory headlights. Looking for a link so I can finally change them out.
View 7 RepliesI Need info on drivers side bulb replacement , its a Xenon bulb and no where online have I found any info on this , only the standard h7 bulb is covered.
The problem I have is the access cover to the bulb cant be removed so I need to know if the bumper and lamps need to be removed?
Want to upgrade my factory non entune radio 57076 to the factory entune radio. what model number radio am I looking for and will I encounter any issues with data for fuel and tire pressure sensors.
View 3 RepliesHave a factory touch screen radio (not sure which one it is) no Navi, but its a 2010 Passat, mine sounds like crap, especially when playing though an IPOD. Put the same music on an SD card and it sounded much better. I literally have only had the car less than a week, and am contemplating going and taking out all the speakers and replacing them with aftermarket stuff.
View 3 RepliesI've been getting the gas cap code off and on for years now. I can wash the gasket off and it goes away for a few months, but then it returns. The cap itself is in showroom condition. It's just the rubber gasket/ring that appears to be "segmented" all the way around.
Replace just the gasket on the gas cap for this vehicle? I know I can buy a whole new AC Delco gas cap from Rock Auto for $20, but to me that's wasteful. Looking at the cap, I really can't see how it comes apart, though. No visible screws, but it must separate somehow ... or would you just use a pick and pull the gasket up and off that way?
Got an 06 with factory air shocks. All of the air shocks need to be replace. Possible to just put in factory shocks or struts?
View 2 RepliesI have searched high and low, and I cannot find how to replace the factory low beam projector style headlight bulb on my wife's 2013 Tiguan SEL. It came with the factory LED style HID lights. There were a ton of videos and how to's for the regular Tiguan headlight replacement, and for aftermarket Ebay LED ones, but I can find anything about how to replace the factory low beam projector bulb, other than "take it to a dealer". My thinking is 'if the dealer can do it, so can I'! There has got to be a way. I can't get the wire bulb retainer loose, or get the bulb out of the headlight housing.
View 2 RepliesI'm really not liking my carpet after 174k miles. I wanted to replace it with a vinyl one from rockauto. I've seen some trucks that had their carpet replaced with diamond plate, 1998 F150 Supercab. Unbolting the seats & bench and removing the carpet should be no problem for me, but the fabrication of the diamond plate floor seems to be difficult.
View 1 RepliesSo, that means I have put 106,104 miles on my truck this year, and missed about 7 weeks for the truck being in the shop, could have been another 17,000.
So, it's time to replace the factory original brake pads?
At least once a week, only the FM band appear on my factory nav. My sat 1, sat 2, and fm2, and am1 band all dissapear. I have to turn the car off and back on to get everything to work again.
The cars currently in the dealer for an other issue and they are looking into this one also. Seems not much is going to happen as it's unduplicabale. I even showed them the videos I have take of it happening. Call VWOA and they said they will look into it.
I had the sirius module replace once, new firmware twice, and in the dealer another time and they couldn't replicate the issue.
How to install an amp to the factory radio?
View 14 RepliesI have an 09 Camry LE. When driving, the volume is consistent until I begin braking. It then lowers the volume itself. When I accelerate, it ramps back up.
Also on the highway, the bass is excessive. I usually turn it down to -1 or -2 depending on the track. The car is completely stock. I've had the car for a few weeks now.
This is the only factor that may lead to me replacing the stock radio. I don't want too, but if this problem can be solved by that, than I will.
I've been having trouble with the stock radio in my 2011 SF. It randomly turns off, then turns back on by itself, 5 to 10 minutes later. It comes back on in whatever mode/ station it was on when it turned off. I've pressed every button, tried to insert a cd, and tried the steering wheel buttons. The USB power goes off too.
The station memories stay, so I don't think it's a power issue, at least at the fuse level. The battery is fairly new. I've cleaned the fuse and both ends of both ground wires in the engine bay. When I cleaned the fuse, I lost station memories, is there two fuses for the radio, perhaps? Or does the memory power and radio power split after the fuse box?
have a GPS and don't use Sirius/XM anymore. I've read part of the radio/ nav system sticky, wow, is it long.
I have searched online for a week a now and I can't find a simple description of wiring scheme for the factory radio. I have remove it and I am try to install an aftermarket unit. I count 22 wires coming into the factory unit and I cannot assign a function to all of them.
View 14 RepliesSo my son cut the factory speaker wires on his Explorer. I bought a new radio for him prior to the "CUT" and the new radio comes with a simple wire harness (2 green, 2 purple, 2 white, 2 grey). The picture shows the factory wires attached to factory module. The "New" speaker wire harness identifies which wire is for what speaker but I need to know what factory speaker wire would attached to the new wires. Based on the picture, how to identify the speaker wires and determine which wire goes to which speaker?
View 1 RepliesPlain and simple. 97 F150 with factory radio and cd changer. Just wanna know what wire to cut on the factory harness to make the radio not dim when I turn on the headlights. Or is there more to it than that?
View 11 RepliesAdding a sub and put it under the front seat? I know a lot of people put it under the rear but i don't want to sacrifice cargo carrying space under the fold up seat in my 2012 Supercab. I was considering a Kicker 8" Hideaway. I don't need pounding base. Just more base.
View 1 RepliesCan I replace the battery in my 06 Passat myself? I've been told that I must take it in to the dealer to have it done, so they can reprogram the car. Doesn't sound right to me.
View 2 RepliesMy 06 Superduty had a plain jane AM/FM stereo. I got a 6CD MP3 replacement from a pick-a-part. I don't know the vehicle it came from, all I can say is that it was an SUV. The radio didn't look the greatest, but it worked. I went back to the junkyard to see if I could get the plug for the AUX line-in. I found a 2007 Fusion that had it so I grabbed the radio, cut the plug that goes into the back and grabbed that too. The line-in was in the center console so I cut that out too. There were seven wires coming out of the radio plug and four coming out of the line-in jack. I connected the four wires because they were the same color on both ends. One was a black wire that ran to a foil shield that encased part of the harness. I guess the other two go to the CAN bus? I don't know, there is no provision for them in my truck. The fusion radio takes a different antennae plug and the face doesn't work. When I plug in the line-in plug that I wired up, it only works on one channel. When I plug it into the radio from the SUV and hit the AUX button, it says NO AUX. Do I need one of those PIE connectors, or is there a way to make my pigtail work?
View 2 RepliesWe have the basic stock CD / radio model number A518A1 and the XM Radio module with the fit kit installed in the passenger side wheel well in the trunk in a 2010 Corolla S.
Installation of the XM Radio & fit kit was dead simple and we're using the built-in OEM antenna on the roof of the car.
The problem we're having is the dreaded NO SIGNAL message when trying to listen to XM Radio.
I have the Lynx portable XM Radio installed in my car and when both cars are in the driveway, I can get the signal all day long and in her car she gets the NO SIGNAL message.
We've already called XM Radio and had the signal resent to the radio numerous times with no success.
I've gone to our Toyota dealer and the only thing they can recommend is to replace the OEM roof antenna. That part alone is $80 and you have to completely disassemble the headliner to get at the antenna.
Wiring up an actual XM antenna to take the place of the OEM roof antenna? I've searched the web and can't find an adapter plug.