Camry :: 2008 XLE Won't Start / Brakes Will Not Depress
Feb 15, 2015
I have a new battery in my 2008 Toyota Camry XLE. The car wouldn't start today so I replaced the starter. Auto parts store tested original and confirmed it was no good. After replacing the starter it still will not start. The brake will not depress. The instrument panel lights will not come on, but the air, radio, headlights, wipers, etc. will turn on. What else could be wrong. We have been trying to figure it out all day and can't even turn it on to get it to a mechanic.
View 4 Replies
Advertisement
My 1990 Volvo 760 turbo has a problem. The brakes are sometimes hard to depress (although they work). When this happens, there are accompanying problems with sluggish acceleration and difficulty with the automatic shifting. What's happening?
View 2 Replies
I was parking my truck and the brakes wouldn't depress and I almost crashed into another vehicle that was parked.
View 14 Replies
I've got a '12 GTI (bought 10/1/12) with just over 20k miles on it. Everything on the car is stock and original - pads, rotors, calipers - and the brake fluid hasn't been flushed yet. The last few months I've noticed an increasing sponginess to the brakes, the pedal taking longer to depress before I feel significant stopping.
Pads and rotors still look good. Fluid level's normal. At best it feels like maybe some air pockets might've worked into the fluid lines. At worst it feels like maybe a leaky master cylinder. I'm wondering if it's a common problem.
View 1 Replies
I have a 2008 Impala that has been having interlock shift issues for about a week. The interlock shift button would not depress. I was able to remove the center console and take a look at some of the wiring. It there's a bundle of wires and there is a black wire that appears to be severed. From what I've read, this is a common problem with the Impala models from 2006 through 2008...it should have been a recall, but for some reason was not. How can I do a low-cost DIY repair on this that's going to be solid and prevent recurring problems?
View 3 Replies
Ok so I had this creaking noise at first when I press n depress the gas pedal (how normal driving should be) and I sprayed some WD40 and now the noise is gone, but it becomes kind of sticky when pressing and depressing.
It's like when u rub ur finger on a glass window back and forth, there is time when it catches ur finger (sticks) before u can move it the opposite way, it's not smooth as it used to be (my other camrys are smooth).
When pressing a little, then a little more, it has that sticky feel, same thing when depressing the pedal. That's the best I can explain it and it is really noticeable when I'm stuck in traffic.
Do u think I have a bad pedal or some white lithium grease will take care of this?
View 14 Replies
What size sockets do I need in order to complete a brake pad replacement for my rear brakes?
Also, what are the torque specs for each bolt I will be refastening?
And just in case a bolt breaks... what size bolts are used on the calipers?
View 7 Replies
Replaced all components of front right braking system. Calipers rotor pads and hoses. Still, every other day or so the front right brakes gradually start locking up within minutes of driving.
I just bought car. I am stuck with this problem now. Only thing left i'm told is replacement of abs module.
Can you just bypass a faulty abs module instead of replacement?
View 14 Replies
While working on diagnosing my center console issue last night, my engine refused to start & I am completely lost as to what the issue is.
I hear a buzzing sound when I hit the brakes and push the button to start.
But all my headlights lights & interior electronics work fine.
I am so irritated as this happens on the SATURDAY evening and everywhere is closed on Sunday; hence I can't get the car serviced.
This is a brand new car w/ less than 2600 miles on it.
YouTube ....
View 14 Replies
Wife was heading to work and it just died? she heard a rattling then nothing? it has oil. it has water. 100k miles on it.
I found water pump bearing shot and noticed water seeping from its weep hole. Ok so I need a water pump. But i notice the crank sensor right under the weep hole. could hot water dripping on it fry it?
I put all 4 plugs on exhaust manifold and can watch it spark as fuel is shot out of plug holes. it has spark. it has fuel. it has compression. it will only try to start on initial second of cranking and it is weak at best when it does?
I thought i read somewhere these motors wont give you full compression on cranking? i only get 55 psi on 2 cranks on all 4 cyl? its been starting and running to good to have that low of compression. and mpg's is 30's.
Battery weak so with a hefty battery charger it still cranks good. is a new know good battery a must? What sensors do i need to check or can i even really reliably check them? no check engine lights?
View 1 Replies
I bought a used 2008 Toyota Camry per-certified from a local Toyota dealer about 2 years ago. About a year and a half ago I got in the car to go to work one morning and it would not start. You turn the key and all the lights come on but nothing else happened. Took the battery to Auto Zone and they said the battery was OK so I had it towed to the dealership. Dealer called when he got it and said it cranked right up for them and it has not been an issue since.
Two days ago I get in the car to leave work and the same thing happens. You might hear the starter click when you turn the key but nothing else happened. The car was getting power from the battery but that was about it. I tried to jump the car off but still the same thing. I had the car towed to a local Goodyear shop and after looking at it the said it was a problem with the alternator, that needed to be replaced, which also killed a cell in the battery that needed to be replaced also. They said since they are replacing the alternator they might as well replace the belt also.
View 14 Replies
Initially when I start driving, the brakes work just find. But it seems as I use the brakes, the front brakes build up pressure and slowly start to lock up. They don't lock up completely, but they do cause a significant amount of drag. The rotor, calipers, rubber hoses and master cylinder are all very new. I'm thinking maybe the issue is with the master cylinder and am considering going to get one along with a brake booster(since it doesn't have one currently).
View 14 Replies
I recently purchased Toyota Camry Hybrid -2008, pre-purchase inspection done by Toyota dealer. Today, my car refuses to turn ignition on (I have keyless start). After several trials, it turned on. I switched off the car and tired after 5 mins. Again it gave the trouble first time, worked second time. What could cause this issue? It's still under hybrid warranty.
View 5 Replies
So, For the past week or so, I've been noticing that my clutch has been getting harder and harder to depress when I go to shift. I only have 1500 miles on the car and picked it up 3 weeks ago. When I took delivery, the cars clutch was silky smooth.
This "tightness" is almost as bad as my 6MT clutch on my old subaru (which needed to be replaced because the spring on the pressure plate tightened). What could be making the clutch feel so heavy? I'm not too familiar with the VW clutch. Is it hydraulically actuated? If so, maybe the fluid is low or leaking?
View 7 Replies
1996 Ford Ranger 4-Cyl. 90,000 miles. 5 speed manual transmission. When the truck is driven 10-15 miles and heats up the clutch will seize in the up position. Once the engine is turned off then it can't be turned back on because the clutch won't depress. After the truck has completely cooled down the clutch and the transmission again work fine, as long as I keep any use under about 10 miles.
View 6 Replies
Having an issue with my brake pedal. When the car sits for long periods of time, usually overnight, the brake pedal is extremely hard to depress. I have to really press down hard in order to start the ignition. Took it into my dealership, and they actually said there was a TSB issued for something to do with the brakes. Well, evidently, they fixed it, but the issue came back almost immediately, only this time it's worse. The brake pedal firms up after 3-4 hours of sitting.
Brakes feel fine once the ignition is turned on. I was told there's no issue with driving it, but I'm not so sure I trust what I was told.
View 24 Replies
I've been having a randomly recurring problem with my 2004 Hyundai Elantra for several months now. I'll be driving along and will notice that my brake pedal won't depress. When I step off of the accelerator, it is like the brakes are already engaged. Eventually, the brake pedal won't depress at all and the car acts like the brakes are fully engaged. Sometimes I can let it sit for an hour or several hours and the brakes will readjust and I can move again. So far I have replaced both calipers, rotors, 2 brake hoses and the master cylinder, but I am still having this problem. My mechanic is flummoxed. Any time I have the car towed in, the brakes release by the time it arrives and he has no problem to observe.
View 3 Replies
I have a 2005 Prius. The remote keyless entry just stopped working for locking and unlocking the doors. I replaced the battery and it didn't affect it's performance. The key will still start the car without inserting it into the dashboard. It feels like the unlock portion of the remote is "stiff" and does not depress. It is toyota model number B31EG.
View 2 Replies
On my 2007 Prius, when I depress the brake to power the car on, it makes a simple, almost welcoming humming/buzzing sound. However, if I do it again within a couple minutes (for example, if I turn the car on to pull up, turn it off, and turn it on again), the noise when I depress the brake is different. When I press it down, it will make no sound for about a second or two, then make a deep 'thud' sound.
View 3 Replies
I just replaced pads and rotors on my 2000 Passat GLX. Everything went fine, i got done, pumped the pedal 10-15 times, took it for a test drive. When I depress the pedal, it goes all the way to the floor, the car pulls right, then left, and slowly stops. At this point, if I hit the brakes again, it feels normal.
I figured it just needed a few minutes, I drove it for about 45 minutes, and it never got any better. I have changed the brakes several times before and never seen anything like this before.
View 6 Replies
I've got a 2008 Subaru Outback with a 5-speed standard, 50K on it. Lately, when I depress the clutch pedal, it makes a whining noise, in any gear or even in neutral. It goes away when I release the pedal. But it also stops making the noise when the engine warms up. That's the part that confuses me.
View 4 Replies
