Celica :: When AC Turned On Idle Drops And Engine Will Die
May 10, 2011
When I turn the A/C on in my 1994 celica gt 2.2 engine the idle drops and will die,
View 4 Replies
May 10, 2011
Advertisement
Celica :: 1989 Celica GT - When Pressing On Gas / Idle Drops And Then Car Dies
My brother was the original owner then passed it on to me. I then passed it on to my younger cousin about two years ago. The car is completely stock and has never been modified. Everything is OEM.Just a couple of weeks ago I was called by my cousin saying the car broke down on her .The problem is that we took it to a few mechanic shops but they still haven't fixed it ...
Problem with car: When pressing on the gas, the idle drops and then the car dies (a scary event that happened to us and on a main road). I do not wish to bring it to another fail mechanic shop.What the shops did: changed all fluids, distributor cap and plugs, new spark plugs, and replaced air intake piping with oem piping.
Camry :: 2008 Engine Don't Idle / In Reverse, RPM Drops
I own Camry 2008, 4 cyl, 2AZFE engine, 2400cc.
I recently, started facing strange issues,
No matter whether engine is stone cold or oven hot, it does not idle where it used to be (2 weeks ago). The car idles at ~800 RPM and the rpm suddenly drops to ~700 and engine flushes in more fuel to rev it up to 1100 rpm. Will take another 10 - 12 sec to reach ~700 rpm and the same story continues.
This however, sometimes go away, in Neutral. Once I put it in Reverse the problem becomes worse with RPM dropping every other second, as if the current in the coils is failing.
All this fuss continues, even when car is at 30 mph. However beyond 30 mph I feel nothing.
Services done in last 2 weeks:
1. Throttle body clean-- complete removal of all the gunk.
2. PCV valve changed from toyota dealer.
3. Mass airflow sensor cleaned.
4. Spark Plugs changed with new Iridium plugs from toyota dealer.
5. New Ignition Coils.
Nothing solved the idle problem - missing in the car. The mechanic convinced me that Head gasket is blown. He was indeed right as the Head Gasket had crack b/w cyl 2 and cyl 3. It was changed and car was much better. But now I am again facing issues.
Rodeo :: 1998 - Engine Speed Occasionally Drops To Idle While Driving
have a 98 rodeo, with a V6 & Auto trans. have an intermittent problem - as I am driving engine will occasionally drop to idle speed and then pick back up to driving speed. Engine keeps running smoothly, just at idle speed.
CEL does not come on / no codes
Replaced Throttle Position Sensor - and thought I had found the problem, but since it is so random, it just didn't happen again for 1 1/2 weeks.
Dodge - Stratus :: 2003 2.7L - Stalling At Idle / Engine Suddenly Drops RPM When Hot
I have a 2.7L flex fuel Dodge Stratus with 120K+ miles on it and a problem local mechanics and the Dodge dealership cannot seem to locate. When the engine is hot, and only when it's hot, the car will jerk suddenly while driving for a split second, then resume normal operations. It feels almost like you hit something and is scaring the bejeesus out of my wife. It also sometimes stalls out when at a light after sitting at idle for a few seconds. It idles down from 600 RPM like the air conditioning compressor is cutting on and then dies completely.
The car shows no error codes and the check engine light does not come on when this happens. I have replaced the spark plugs, and the transmission solenoid, which is what the Dodge dealer said "fixed" the car for almost $900, and it did it again on the way home from the dealership. My next idea was to change the fuel filter, or maybe the cam position sensor or timing belt or chain. I wonder if I am just trowing money down a hole at this point though, since Kelly Blue Book on this car is under 2K anyway.
Santa Fe (CM - 2007-12) :: Idle Drops And Loss Power After Engine Warms Up
When I start the engine it works fine while the motor is cold (idle normal all smooth). When the engine the temperature reach normal operating range the car loose power and idle drops to 350-500 rpm and if i am driving I can not go over 40mi/h. I drive a 2008 Sta Fe now with 96000 KM (~~60000 miles). A month ago the engine start shaking severely and knocking noise (like some spark plugs where not working), from this to now:
Changed all sparks plugs
Changed all ignition coils
Now this situation looks more related to temperature of the engine.
Corolla / Matrix 2009-13 :: Idle Slowly Drops From 650 To 600 When Stop And Engine Start To Vibrate
I recently bought a used 2010 Toyota Corolla s with around 79000 miles on it. It's an automatic and everything drives good but just one thing that has been annoying me. The problem is that when I come to a complete stop and stop there for a a while, the idle slowly drops from 650 to 600.
When this happens the car engine starts to vibrate excessively and you could feel it on your feet and steering wheel. When I turn a load on, the rpm rises and the vibration goes away.
I have cleaned the throttle body, checked the mounts and it's good, no cracks, cleaned MAF sensor, reset the idle by unplugging battery, took it in to the dealership and they said it is normal. I believe it's not normal.
Celica :: 5fse Rough Start Up And Sometimes Stall When RPM Drops Down To 0
Why my car sometime start up really bad and even stall when the RPM drops down to 0.... This usually happens on a cold start up. What I should do?
View 4 RepliesCelica :: Car Drops The Acceleration - Louder Noise Under Load
I have 93 GT-S, AT, 2.2, 163,000 miles.
My problem is slow acceleration. As I get on the highway and give it the gas my car slowly climbs to my travel speed at 75 mph. She will climb steady at around 3000-3100 rpm. When I punch it the car revs to approx. 4000 rpm but then quickly drops back to 3000 without me letting off the gas. Almost sounds like its bogging down. Another thing I noticed while cruising at around 65 mph is that the car bucks a little but I don't hear any misfiring. Also, when I do step on the gas, the car is severely louder. Almost sounds like it's coming from under the hood. I tried parking it, opening the hood, and listened to the engine while giving her the gas but she sounds much quieter. So the louder noise seems to happen under load. Please note there is no check engine light.
Is this one issue or possibly multiple issues? Could my TPS be an issue here as well?
Celica :: 92 GTS Vibrating At Idle - Engine / Transmission Mounts
I am working on a friend's '92 Celica GTS Manual trans, and the massive vibration at idle is telling me its time for engine/trans mounts.
After some searching online..I finally found a place that shows all of the mounts. HERE
In that diagram, which of the mounts/dampers should I replace, and which of them never wear and can be left alone? Or, should I go all out and replace all of the rubber?
I have heard of going with poly mounts, and filling the old mounts with polyurethane caulk from HD, and all of that jazz - I'm not really interested in that - I want to stay OEM here.
Celica :: 1992 - Engine Feels Like Its Misfiring And Won't Idle On Its Own
I recently bought a 92 Celica gt (5s-fe). The engine feels like its misfiring and wont idle on its own.
I've done all the normal maintenance to it and the spark plugs all show normal signs of wear. I haven't verified fuel and spark yet. Check out the video below. The piece of cardboard is to keep the throttle partially open. Also, the exhaust is broken off at the flex pipe so excuse the awesome sound ...
[URL] ....
Celica :: 1986 GTS - Warm Engine Sometimes Turnover And Idle Very Rough
I have a 1986 Celica GT-S with 50,000 original miles on it. Car starts perfectly fine in the morning, runs fine, no issues. Problem happens when the engine is warm, and I let it cool off for about 10 minutes or so, at that point, when I try and turn the engine over, it would sometimes turn over and idle very rough, or sometimes it would die and I have to give it gas to keep the engine running. Once I am able to get it in gear and drive, the engine rpm would recover and go back to normal. I have new NGK wires, denso iridium spark plugs.
View 2 RepliesCelica :: 1992 Toyota - Engine Knock Quite Apparent At Idle / Low Rpm
Alright so I got a 92 toyota Celica 2.2 5SFE recently and guy before did a head gasket.. well i started to work on the car. fix things here and there. well one issue I cam across was low compression.. 170 170 30 90.. so i was like ok the guy didnt do it right.. took it apart. found out valves were stuck open. So i ordered a remmaned cylinder head to put in and new head gasket set etc.. replaced all gaskets that came with it..
Also put in remanned fuel injectors due to one leaking so i just replaced em all. New plugs, wires, cap, rotor, timing belt, followed the oem manual word for word to install and remove and timing is right. But I got it all back together and ran great. until my tps went out(replacing that soon). Compression is now 180 across the board.
Now I got a knocking issue, Its quite apparent at idle/ low rpm.. solid sound, goes away at higher rpms, gets plenty of oil to cylinder head, started bout 150 miles after finishing. Im not sure where to start.
Celica :: 1987 Toyota 1600 GT - When Engine Completely Warm Up Idle Is About 1000 RPM
I got a 87 Toyota Celica 1600 GT, with a TVIS 4A-GE engine in.
My problem: when i just start the engine cold, it revs to 2500 RPM, and stays there for 1-2 minuttes and then falling to about 1500 RPM, and when the engine is completely warm my idle is about 1000 RPM.
first i think that 2500 RPM cold is a bit to much, and i dont know what to do with it. but my biggest problem is when the engine is fully warmed up, and i rev it to lets say 3000 RPM and then lets the gas of, the engine falls to about 500 RPM sometimes it stalls but if it not stalls then it would slowly gain some RPM and then it goes up to 1000 RPM again.
How can i prevent the engine falling that much when i let the gas off? it's quite annoying when i drive the car and comes to a stop it sometimes stall.
Celica :: High Idle - Stay Revving At About 2000 RPM And Check Engine Light Is On
I've just done an engine swap to my 2000 GTS Celica. The new engine seems to run nice and tight and smooth and everything but I can't seem to bring the idle down. It stays revving at about 2000 RPM and the check engine light is on. The engine is from Japan and only has 35,000 kms. on it.
View 14 RepliesScion - Tc :: Shaking / Idle Drops - Car Shuts Off When Idle On D Or Reverse
I drive a 2006 Scion tC with 96000 mileage. The car has been getting a lot of problems lately.
1. P0741 torque converter engine light
2. Lost in power
3. Lost in MPG
4. Shakes a lot inside
5. Low Idle
6. engine shuts off on reverse and d mode
7. Noisy strange sounds
8. Gear slip around 2-3
9. RPM goes high at low speed.
I Replaced,Spark plugs, coil plugs, engine oil, coolant, steering fluid, brake fluid. I need to to replace the transmission fluid. I was told by a couple of shops to get a transmission rebuild....
I also read someones comment online: "It's your transmission. Your torque converter is bad. There is too much torque as a result. When your car is in neutral or park there is no torque being created. When you leave the in gear idle state, the torque is relieved. That is why the problem will go away when you hit the gas."
Phaeton :: RPM Drops Significantly While Steering When Idle
I am experiencing significant RPM drops when the car is at idle and I start to steer. feels like the engine is almost going to stall. I looked online it says maybe the IAC valve. where is such thing on phaeton?
View 6 RepliesTiguan :: 2013 - RPM Drops Quickly When Idle
I purchased a CPO 2013 Tiguan about 5 weeks ago with just under 29k miles. I now have about 30.5k miles. I have noticed this occur a couple of times. After the car is warmed up, and I am sitting idle for a little bit, I notice the RPMS bounce down to about 600, but then quickly correct itself and get back up to 750-800. When I purchased the car, they said they did the 30k mile maintenance. I have done 1 oil change withe the Pennzoil Platinum 5w40 euro blend. I do not feel like the oil change is the issue at all as I have changed oil plenty of times with numerous cars. Maybe I just need the ECU re-flashed?
View 7 RepliesFord Fuel System :: 1988 - Fuel Pressure Drops Off Fairly Fast When Turned Off
Working on a 88 Ranger 2.9L 5-speed ext cab. The fuel pressure drops off fairly fast when turned off and I'm pretty sure that the check valve is bad. My question is, which pump has the check valve? It is a single mid tank set-up and has a pump in the tank and on the frame.
Pressure is fine while running. about 30psi @ idle and 40psi with no vacuum on the regulator. The pressure drops off within a couple of minutes which causes it to have to crank over for a bit to rebuild pressure and start.
It looks like the frame pump is readily available while the in take pump is special order. I just need to know which one has a check valve. I'm thinking the in tank pump, but I hate to waste money for the wrong pump.
Pressure drop rate
30 psi @ shut off
25 psi @ 1:05 min
20PSI @ 2:30 min
15psi @ 4:45 min
still dropping
Prius (2001-03) :: Red Triangle Comes On And ICE Drops Down To Idle While Driving
On my 2001 Prius, while driving down the road the red triangle comes on and the ICE drops down to idle and the car slows down to 29mph. If I floor the gas peddle the car may or may not pick up speed slowly but if I let off of the gas peddle the least little bit it will slow down to 29mph. If I stop and turn the car off and then back on the triangle is still there but the car runs fine. After turning the car on and off 2 or 3 times the triangle disappears.
View 2 RepliesVolvo :: Idles At About 1200 RPM / When Engage Drive Idle Drops To Very Low
My Auto 2.4 850 SE (38600miles) does this lately:
- idles at about 1200 rpm, and takes long to settle to its 850 position, even when warm;
- when I engage Drive, idle drops to very low, car vibrates as if engine wants to switch off, then rises again as I give gas and pull away.
Why this is the case, and what I could do to remedy this? (About 2 months ago, idling was going really nuts! I removed the flame trap and fresh air hose: it was full of oily gunk and I gave all components a good clean up with carb cleaner and then replaced them, and then idling all fine after that).