...... 2010 Corolla LE 1.8L ...... View the video I uploaded ....... The noise is seems to be getting worse. My first thought is the bearings in the water pump may have failed. I'm also thinking that there isn't adequate lubrication near the gear assembly or the belt. Could there be a problem with the tension in the belt?
View 7 RepliesI just bought a used 2009 corolla, turns out a few weeks in, I am getting the infamous water pump/ac compressor clicking noise from the drive belt area.
View 3 RepliesRecently blew the belt that runs the water pump, etc while on a vacation. Had to leave the car at a small mechanic in Winthrop, WA. He replaced the Water pump which had gone bad and the belt that shredded. The car ran beautifully for a week. Now there is this constant rattling sound coming from the water pump area. I attached a video with the sound. The sound will quicken as you accelerate. At cold start up it is usually not present then starts a couple of minutes in.
View 2 RepliesI just bought a 09 Corolla S a month ago. In the last few days I've been hearing a popping/knocking noise while I'm driving. It sounds like it is coming from one of the wheels but which one. It usually happens once I decelerate or driving at low speeds. If I brake the noise will stop. The rhythm of the noise doesn't seem to be consistent with speed I'm driving. It happens more often on bumpy roads but it still happens on smooth roads. I'm wondering what are the possible problems that are could cause this?
I don't know if this would relate to the sounds I mentioned but when I bought this car it had brake problems. It would grind pretty loud. The dealership ended up replacing new rear drums. So when I drove it home everything sounded good for about a week. The grinding noise came back and after I sprayed some brake cleaner it went away for a few days. I'm assuming thats what the dealership did to hide the noise. I went ahead and changed the front pads and that worked for a week or so...but the grinding noise is back. I was about to change my rotors this weekend when the popping/knocking sound I mentioned above started happening.
So recently every time I start up the Rolla I get a chirping noise real quick and everything seems to run alright. I had my neighbor, a GM mechanic just look quick; and on the belt connected to the water pump looked like it was unusually worn on spots of it.
The car has about 27XXX miles on it ('10 Rolla S).
Going for an oil change next week, going to try and find out what's going on with this thing. I've seen other threads talking about the water pump causing the symptoms I've described at around the same amount of miles. Seems like a common part to fail on the car.
Car wont even crank, no power to any accessories.
Car is making a clicking noise from the engine fuse book too as well.
Low engine oil pressure light also comes on too.
Checked the oil which is fine.
Checked fuses 2 weeks ago and they were fine.
Need a working car.
2010 Matrix XR, car drives great except while driving off of parking lot going slow over bumps I hear a bit of rattling noise coming what seems like the driver side dash area... it almost feels like its coming perhaps from the steering wheel but the steering wheel feels very tight with no play at all.. Other than that it's all good can not hear anything wrong driving on a smooth road or a highway...
View 9 RepliesRecently blew the belt that runs the water pump, etc while on a vacation. Had to leave the car at a small mechanic in Winthrop, WA. He replaced the Water pump which had gone bad and the belt that shredded. The car ran beautifully for a week. Now there is this constant rattling sound coming from the water pump area. the link is a video with the sound. The sound will quicken as you accelerate. At cold start up it is usually not present then starts a couple of minutes in.
[URL] .....
2009 Toyota Corolla base model
We took our vehicle to our local Goodyear because we had been hearing a noise and they discovered that the water pump had actually dislodged itself from the engine and was only being held on by the belt itself.
Also when I said the brakes weren't working they would work but since they were getting coolant on them they were making a horrible grinding noise. I took the vehicle to brake check to ensure the brakes were good because we have lifetime warranty and they assured us the brakes were fine.
It wasn't until we noticed the water pump that the Goodyear tech also showed us that the coolant had made it's way onto our braking system on the passenger side.
This morning while driving with a/c on, water was coming out on the side of the center console. It's leaking a lot, that a spot is soaking wet.
View 4 RepliesI just recently bought 2012 CorollaS. Great car inside and out with about 20k miles. I've noticed under acceleration and sudden braking a pop is coming from the passenger fender area. I've replaced the motor mount on that side thinking that might have been the issue, but it's still there. What are the torque specs for the motor mount. Maybe it's simply not torqued correctly.
View 2 RepliesSo today I'm out running errands. Its hot and the ac is on. I notice water is coming out from underneath the dashboard on the passenger side. I pull the floor mat and water is everywhere. Soaked!! Ok so the ac water that's supposed to drip outside and underneath the car is now dripping inside the car. I pull off all the plastic crap, glove box to see if I can tell where its coming from. Not seeing it. Also some crap must have gotten wet because my check engine light is on along with a flashing vsr off light.
View 6 RepliesSo ever since I bought my car in April, I hear this noise when I accelerate. It only happens when I first start the car. Its a grinding light noise but you can definitely hear it when you are in the car. I only hear it when after I start the car, go reverse, and right after I step on the gas on drive. Today I took it in for my 10k service and told the Assistant Service Manager about it. We went and took my car for a test drive and now we also hear the noise right after we he start the car then reverse.
View 11 RepliesI have a 2009 Corolla with 67k on the odometer so it is outside of warranty. I recently found about the TSB for the grinding noise on start up and took the car to my mechanic to have it looked at. He said he wasn't able to do the job because he would have to do some sort of computer update (ECU reflash?) and he doesn't have the means.
My car is currently at the dealership, and they want around 1800 dollars, 1400 for the VVTI gear, and another 400 for a tensioner. I have a friend who used to be a Toyota mechanic, and he says he can do the work as stated in the TSB, but he's unsure if the ECU would need updating, and it does not mention anything in the TSB. So what I am wondering is if :
1. Does changing the VVTI gear actually fix the grinding noise? I was reading an old thread where members said it was still there after having the TSB done.
2. Does there need to be anything done to the ECU after doing the TSB?
I have a 2009 corolla S. no warranty. 59k miles. my car gets a grinding noise whenever i start it. this is the example of the sound.
YouTube ....
Fiance's 09 Corolla S just started having a rattle/knock noise this evening. car has 123k. It's clearly an engine internal sound. I believe it is coming from the cylinder head. She called me when it started making the noise, she shut it off and has only been ran enough to get it on and off the trailer.
Not sure if it's a broken valve spring or valve. or the timing chain guides? It threw a CEL light.
I ran the code on my scanner and it came back with: P0302 (Cylinder 2 Misfire)
I've got a grinding noise coming from near my water pump. replaced the serpentine belt w no luck. it's got 212,000 miles on it so I'm guessing the water pump is going bad.
View 14 RepliesI've been having this issue with my 2009 Toyota Corolla for some time now. When I turn the car on, there is a noise coming from under the hood that sounds like a screeching/grinding noise. I have captured the noise in this video: [URL] ....
It happens most times I turn my car on in the morning, after it has been sitting off and untouched for the night. When I am turning the car on afterwards throughout the day, the noise is less likely to appear.
I recently took my car in and got the water pump and belt replaced, because a few months ago I was driving down the highway and I heard a similar noise coming from under the hood, and I opened the hood and red coolant liquid was splashed everywhere. I am not knowledgeable about cars at all, but the dealership replaced the water pump and the belt and that seemed to fix that issue, but the grinding noise upon ignition is still there.
I took it into the dealership, but they were not able to replicate the issue because it had not been the first time the car was turned on for the day, so there was no grinding noise. I would like to know if it is the water pump or belt, since those are still under a 2 year warranty with the dealership. Otherwise, I need to know what this is so I can get it fixed.
I've owned this vehicle for the past year. This 2009 Corolla XRS manual has a very annoying steering rattle which took me the whole year to finally breakdown and diagnose. There are many forums stating this rattle is associated with the intermediate shaft assembly #2. I did end up replacing this part 45260-02110, hoping this would fix the rattling or knocking issue. It did not, but smoothness the steering has improved. I removed the upper portion of the intermediate shaft to pinpoint the sound. Originally I believed the noise may have been coming through the bulkhead from the intermediate shaft #1 or steering rack. I checked under the boot and everything was snug. Then I rattled the steering wheel around and this what I found.
It seems the noise is coming from the pinion where the power steering motor meets the steering column. You can hear the knocking noise with settle steering wheel movements. As I move faster, the knock turns into a rattle at higher speeds most likely vibration from the road. At this time, I do not want to disassemble the whole column just to see if I can adjust the motor height (if possible).
YouTube : [URL] ......
I noticed while driving my car there was a unusual rumble or grinding sound coming from my drivers side front wheel well. I get out and look I see a bunch of Fluid all over my wheel well. I look around turn my wheel around and see this fluids all on my rotors and suspension. Ive noticed couple weeks back the boots on the struts were ripped in two pieces from deteriorating or dry rotting (this was on both sides) and ive also been hearing some odd squeaking sound for over 15k miles every once in a while going over big bumps or train tracks. Struts go out at only 80k miles on their corolla? Yeah struts do usually lose their life around 60-80k miles but I've never seen them leak around that many miles. Is this a common issue?
View 5 RepliesSometimes when I start my car it makes a weird cranking/grinding noise for half a second. The closest thing I have to engine mods are my TWM short shifter, and my borla axle back exhaust.
The noise only happens after my car has been sitting there, parked for a few hours. So to bring it to Toyota/mechanic would be nearly impossible to replicate, unless I left it there for a while. And even then, the noise only happens sometimes.
Yes I'm pressing my clutch pedal all the way down. No I am not holding the key too long when starting the car. What it might be?