Elantra XD (2001-06) :: Loud Grinding Noise Coming From Front Of Car When Decelerating At Low Speeds
Sep 22, 2012
Having problem with my car (2001 Elantra GT) - over the last month or so it's been occasionally making a very loud (not but consistent) grinding noise coming from the front of the car when decelerating at low speeds. The noise sounds like gears slipping over each other but cuts in and out. It's pretty loud and not a nice noise to hear! Sometimes it makes the noise when I brake firmy but not until I reach lower speeds... mostly it's just when coming to a stop, but it did it once last week when I was pulling very slowly out of a parking spot and not even braking.
As it's become more frequent (going form maybe once a week to several times every car journey) I have started to feel something in the brake pedal also, like there's something kicking it from behind. I took it to a mechanic and had to pay a ton of money to get a broken front left ABS ring replaced (it also had the front right ring replaced in May), and within 2 minutes of driving away from the place the noise was back. Before I spend even more money that I don't have on taking it back for extra diagnosis.
I'm told that this is almost certainly the ABS system that has a fault even though the ABS light never shows except when I start the car, and I've taken the fuses out of the ABS in order to confirm that it is. I haven't heard the noise after a few days of driving with ABS unplugged so I think we can be reasonably sure here. Is there anything that I can check myself or test (I'm not very handy when it comes to cars) or can you tell from this information what it's likely to be? Other things that I've noticed with the car which may or may not be relevant are:
- the warning lights for brakes, ABS and TCS are all lit with the fuses for ABS1 and ABS2 taken out. I take it this is normal for all 3 to illuminate with the fuses out?
- since unplugging the ABS I've noticed a slight metallic squeal from the brakes as if the brakes are worn down. Didn't notice this before I unplugged ABS though it may have been there, not sure.
- sometimes when going over a speed bump or just a minor imperfection in the road I hear a clunk in the front of the car and feel something move in the underside of the car. Happens mostly at lower speeds also, but not if I go over the bump really slowly.
- in the fuse box when I took out the ABS fuses I noticed there was a bit of minor melting/brown burn marks on the top of the connections marked (iirc) ECO3 and ECO4 on the diagram (large white connectors). Is this anything to be concerned about?
- sometimes when I have air coming into the car through the air vents it will become significantly warmer for a few minutes, then slowly go back to normal. Can't think of any circumstance that links the times when this happens (eg. speed, weather etc).
- the oil pan has a leak which is on the list of things to fix when the car works properly.
View 2 Replies
Advertisement
Over the past few months I'd noticed an intermittent grinding noise coming from my left front wheel at low speeds. I took it in once but it refused to play along so I finally managed to catch it on camera and let the dealership listen to it. They booked me for today, saying it sounded like a wheel bearing (to which I agreed) and I dropped her off around ten, not expecting it to cooperate for the second time.
I got a call from the dealer around 2 PM saying that they were able to duplicate the noise and that when they took the left front wheel off and ran the car on the lift with the rest of the wheels off the ground, the noise went away. Even stranger still, when they put the wheel on the tire balancing machine and spun it, gronch, gronch...gronch, gronch....gronch, gronch. It was coming from inside the wheel! I gave them permission to dismount the tire from the wheel and about ten minutes later I got another call saying they'd found a handful of tiny hard rubber balls inside the mounted wheel/tire assembly that were rolling down the inside of the wheel and causing the grumbling at low speed.
Here's the kicker: they were in all four wheels! The tech even saved them for me so I could take a look and they don't look like anything mass-produced; some are larger than others, some are round and some are oval-shaped but when I dropped one on the glass advisor desk, it made a very clear 'Clink!'.
View 29 Replies
So, last week I got my transmission replaced and they also had to replace the CV axle because it was damaged beyond repair when the Transmission self-distructed. They drove it after all the repairs and said it was driving fine, just that it had a belt squeak.
On my way home (30 min drive) about 10 minutes in, still in the city, my brakes start making a grinding noise and sort of a thump thump thump when I brake which sounds like its coming from the passenger side front, it makes me really nervous. It doesn't sound like any brake grindy noise Ive ever heard before and it wasn't making any brake noises before it broke down. (On a side note: it also made a weird noise maybe the first 3 times I drove it after getting it back and I turned the wheel hard to back out of a parking space, that used to be when I heard the belt squeak but I haven't made it squeak since I got the car back.)
Everyone I talked to said it sounded like it needed new pads so tonight I bought new brake pads and rotors for the front and got everything taken apart. The rotors didn't look bad at all, just some light surface scratches, nothing deep, no warping I could see, and the brake pads look almost brand new. I did notice that the inside brake pad on the passenger side was missing its little metal plate that is usually between the caliper and the pad, so I went ahead and replaced all of the brake pads hoping this lost metal plate was the issue.
I also turned the rotor by hand on each side while the brake pads were off and the only difference I could notice was when turning the passenger side one it made a little more noise almost like it was loose.
I got everything put back together and drove around the neighborhood with my boyfriend in the car to listen, the grinding noise was gone and it seemed to brake really well (never got above 30 mph.) However, on my way to return the rotors to advanced auto (45-50 mph) it started making the thump thump thump noise but without the grinding, still on the passenger side. I can feel it in the gas pedal and now it not only happens when I'm braking, but also any time I let my foot off the gas pedal. The only time I dont feel/hear it is when I'm accelerating.
View 3 Replies
I applied brakes while car was moving slowly, less than 10 mph, and heard loud grinding sound coming from left front as car stopped. Shifted to reverse and car barely moved, less than 1 foot, which was accompanied by the loud grinding sound, then stopped. I could find nothing interfering with the wheels but did find pieces of brake pad on the ground along the path the left front wheel had followed. The left front wheel appeared as if the calipers were holding whatever remained of the brake pad and/or backing tight against the rotor. brake pad fell apart on 2002 at 43,561 miles...
View 19 Replies
I have a 2002 Hyundai Santa Fe v6. I've had problems with the air conditioning in that it blows hot. Paid around 900 bucks to have a new compressor installed because the mechanic said that would fix it but it didn't. That was about 8 months ago. Still blowing strong but no cold air. About two weeks ago I took the car to a different mechanic who told me it needs a new compressor which would be 900 bucks. I declined that but had the guy do a little work on the breaks. He put new rotors and pads on the front brakes two weeks ago. Now within the past couple days when I start the car up it makes an extremely loud nasty grinding type of sound for a couple seconds then stops. Oil is fine and new. It happened this morning long enough for me to look under the hood and see the fans looked like they were fine, and the loud grinding noise seems to be coming from behind the glove box. It hasn't broke down on me yet, it's just really obnoxious and embarrassing with all the noise every morning.
View 8 Replies
when i accelerate or let off the peddle I hear and aloud thug or dull bang. I've checked and greased all the u joints. Disconnected the carrier bearing and separated the drive shaft and greased it up. Still get the noise I have very little play in the carrier bearing but I don't think that's the problem. It sounds to me like might be at the transmission. What do y'all think it is?
View 2 Replies
I just replaced half shaft on driver side of my 2002 elantra. I took off brake caliper and pads to get to shaft now that I've put everything back together theirs a sound like the brakes are slightly touching but not sure it's not cv shaft?
View 1 Replies
My 2007 Hyundai Elantra SE (Automatic, 69,400 miles) makes a grinding noise when I start to accelerate from 40 mph. I sometimes hear a noise that sounds like an airplane wheel being activated when I'm driving at lower speeds driving around town. Could this be the transmission? Who should I take the car to?
View 7 Replies
Early this week my car started making a loud knocking/rubbing sound (Kind of in between when your brakes are ground down to the rotor and a knocking pattern).
FIRST, it started only when I turned slightly left or left.... NOW, it's doing it as I go straight and when I turn to the right as well... oddly enough it's not as bad when going left anymore...
What this could be?? And if it's an easy DIY fix..... (maybe a link on how) and how much the part(s) might be?? I've taken video (for sound as I drive)...but not sure if I can upload it (size limit).
View 12 Replies
As the title says I picked up a 2001 7.3 power stroke excursion and I have some questions.
Issues : Loud hum out of front end at highways speeds I believe this to be the hub main bearing I already have the assemblies apart. Oil leak 4 inch spot after 4 days. door lock actuators. Passenger side inner axle seal leaking (very small leak but I'm sure it will only get worse).
Repairs to be made before road trip in 6 weeks to NC
1. Replace hub assemblies
2. Replace all outer axle seals
3. (Maybe) Inner Axle seals
4. U joints since axles are already out
4. Diff fluid front and rear
5. Trans/transfer case fluid and filter
6. Engine oil and filter
7. Flush coolant and replace thermostat and o ring
8. brake fluid
9. Have truck reviewed by competent diesel mechanic. Know of any in CT?
My main questions are about the carrier. How do I remove the carrier without the spreader tool? Since I'm not changing anything do I need to check backlash before and after removal? If putting it in the freezer before reinstallation to shrink it, to be successful? In everything listed above removal and reinstallation of the carrier makes me nervous being a sensitive drivetrain component.
Either way its definitely a cool truck and id like to get it off the jack stands and start driving it.
View 14 Replies
I bought a new 2013 Hyundai Elantra Coupe this past August and this is my first car.
My first concern was that Hyundai advertises 27mpg in city and around 37(?) for highway. I acknowledge the fact that Hyundai recently had to lower their mpg estimates for some of their cars and provide reimbursements but however, these reimbursements are for 1-2mpg difference. My car after more than 6 months is still only getting about 14-15 miles on a casual drive in the city and only about 19-20mpg combined and about 24-25 on the highway! I am only getting about half the estimate for in city! I do not drive aggressively. In fact I am a pretty safe driver since I am a new driver and cautious about everything. I am also using premium gas on my car. I called the dealership I got the car from and they were trying to tell me about the reimbursement program which I already knew of... The reimbursement based of the 1-2 mileage difference is not what I want. I want to fix it and get close to the estimated mileage as I can. What is the best way to go about doing this?
The other issue is that sometimes when I hard brake, my car makes a loud grinding noise. My dealership's service center said they could take a look at this. I was mainly wondering if there is anything I should be concerned about for this?
View 54 Replies
Whenever I start my car, there is about 20 seconds of loud grinding coming from the glove box. It's sort of a tak-tak-tak-grrr-tak-tak-tak-grrr over and over. I've opened the glove box and noticed that with each start, the Navi box spits out the DVD, makes an awful grinding noise, then self-reinserts the navi DVD. I'm guessing this isn't normal, as it jars the normally whisper-smooth operation of my Phaeton. Is there an easy fix, or is this something to take the car into the dealer for? It would my first time taking it in for anything.
View 5 Replies
I have a 2007 Elantra with 138,000 miles. I never had any slipping or jerking or reverse issues in the past. I got into the car put it in reverse just fine then put it in drive and nothing happened, I put it in park and the car kept rolling like in neutral and started making a loud grinding noise. When I put the transmission in any other gear the noise stops but will not move and acts as if in neutral.
View 2 Replies
I have a 2000 grand am with 189000 miles and i have replaced both front wheel bearings and all of the struts. I put new brake pads on and rotated tires. I still have a horribly loud grinding noise in the front end of the car. I jacked it up off the ground and took the front wheels off and put the car in drive and the noise is still present. It gets louder the faster i go.
View 1 Replies
I have a 2001 Honda Accord (automatic) with 128k miles.
I've been having some strange grinding noises coming from the front while driving. It started off a couple of weeks ago as a very low (only some people could even hear it) humming kind of noise. It suddenly got worse one weekend and has now evolved into a louder, clearer grinding sound. Thought it was a wheel bearing, but the shop says it isn't. They think it might be the transmission. Here are some more details and a youtube video of the sound below:
-When accelerating, you can hear a low rhythmic humming, if anything.
-When coasting (not accelerating or braking), especially at speeds below 30 MPH, it makes a much clearer grinding noise that is still very rhythmic.
-When accelerating or braking, the sound goes away or is much lower and less noticeable.
-Appears to be speed dependent and not based on RPM.
-The noise is present when shifting into neutral while moving but not in park or reverse.
Here's a video of the sound: [URL] ..... It's filmed with my phone so it isn't great but you can probably hear it using headphones at a relatively loud volume. You can hear the low thumping/humming a little before 10 seconds in. You can hear the grinding noise from :11 seconds until the end (I'm decelerating), with it most audible after :20.
View 3 Replies
I have a 2000 reg Honda CRV and when the car has been run a few miles there's a grinding noise from the rear of the car, especially when decelerating it sound like the axle.
View 8 Replies
Just got a 2013 IS-F. Loving this car, but discovered an annoying issue. Grinding noise coming from front brakes when slowly coming to a stop below 5 mph. Is this normal?
View 9 Replies
I just got the car back from repairs, there was a loud grinding noise coming from the left side of the engine. It turned out the whole rack and pinion setup was pouring out fluids and needed to be completely replaced also while it was in there they checked out an oil leak which ended up being the front valve cover and replaced a dead O2 sensor. The car has 99,300 miles
View 6 Replies
I have been hearing a loud squeek coming from the wheels in the front. It sounds like a brake wear bar but isn't it a little early to replace the pads already? I searched the forum last night briefly and found some threads where people commented the brakes should last much much longer than 50000.
I do not ride my brakes and I don't think I am hard on them. They still work great and do not feel worn. The noise is constant (not only when i turn the wheel) and it goes away after a certain speed.
View 12 Replies
I have a 2006 Subaru Forester with 115K miles. It's been well-maintained and well-loved.
For the past few months, the brakes have been inconsistently making a dragging/grinding noise when coming to a stop at low speeds (<5mph). It sounds to be coming from the front half of the car - I can feel it vibrating a little near the driver side. We've taken the car in to be looked at three times - each time, the mechanics think they've heard the noise and report there is absolutely nothing wrong with the brake pads or rotors. Twice they reported a shim was out of alignment. After the last shim adjustment, the noise got a little better - instead of grinding, it's more of a dragging sound now. Because the noise is inconsistent, I haven't been able to crack the formula of the conditions that produce it, other than that it only happens as I'm coming to a stop at very low speeds.
Is there something besides the brakes we should be having inspected? Does this sound safe to drive?
View 10 Replies
Every once in a while, while driving my 06 350 SRW at slow speeds, I hear a grinding noise coming from the left side of the truck. It is almost like a winding grinding noise if that makes sense. It will grind slow to a stop, and then I hear a clunk.
This is a very intermittent problem. The tires are completely shot on the truck, and I thought that would be it, but considering it is intermittent and the clunk I hear as I come to a stop I figured it could be it.
View 4 Replies
