Santa FE SM (2001-06) :: Loud Grinding Noise Seems To Be Coming From Behind Glove Box
Jun 16, 2014
I have a 2002 Hyundai Santa Fe v6. I've had problems with the air conditioning in that it blows hot. Paid around 900 bucks to have a new compressor installed because the mechanic said that would fix it but it didn't. That was about 8 months ago. Still blowing strong but no cold air. About two weeks ago I took the car to a different mechanic who told me it needs a new compressor which would be 900 bucks. I declined that but had the guy do a little work on the breaks. He put new rotors and pads on the front brakes two weeks ago. Now within the past couple days when I start the car up it makes an extremely loud nasty grinding type of sound for a couple seconds then stops. Oil is fine and new. It happened this morning long enough for me to look under the hood and see the fans looked like they were fine, and the loud grinding noise seems to be coming from behind the glove box. It hasn't broke down on me yet, it's just really obnoxious and embarrassing with all the noise every morning.
View 8 Replies
Advertisement
Whenever I start my car, there is about 20 seconds of loud grinding coming from the glove box. It's sort of a tak-tak-tak-grrr-tak-tak-tak-grrr over and over. I've opened the glove box and noticed that with each start, the Navi box spits out the DVD, makes an awful grinding noise, then self-reinserts the navi DVD. I'm guessing this isn't normal, as it jars the normally whisper-smooth operation of my Phaeton. Is there an easy fix, or is this something to take the car into the dealer for? It would my first time taking it in for anything.
View 5 Replies
Having problem with my car (2001 Elantra GT) - over the last month or so it's been occasionally making a very loud (not but consistent) grinding noise coming from the front of the car when decelerating at low speeds. The noise sounds like gears slipping over each other but cuts in and out. It's pretty loud and not a nice noise to hear! Sometimes it makes the noise when I brake firmy but not until I reach lower speeds... mostly it's just when coming to a stop, but it did it once last week when I was pulling very slowly out of a parking spot and not even braking.
As it's become more frequent (going form maybe once a week to several times every car journey) I have started to feel something in the brake pedal also, like there's something kicking it from behind. I took it to a mechanic and had to pay a ton of money to get a broken front left ABS ring replaced (it also had the front right ring replaced in May), and within 2 minutes of driving away from the place the noise was back. Before I spend even more money that I don't have on taking it back for extra diagnosis.
I'm told that this is almost certainly the ABS system that has a fault even though the ABS light never shows except when I start the car, and I've taken the fuses out of the ABS in order to confirm that it is. I haven't heard the noise after a few days of driving with ABS unplugged so I think we can be reasonably sure here. Is there anything that I can check myself or test (I'm not very handy when it comes to cars) or can you tell from this information what it's likely to be? Other things that I've noticed with the car which may or may not be relevant are:
- the warning lights for brakes, ABS and TCS are all lit with the fuses for ABS1 and ABS2 taken out. I take it this is normal for all 3 to illuminate with the fuses out?
- since unplugging the ABS I've noticed a slight metallic squeal from the brakes as if the brakes are worn down. Didn't notice this before I unplugged ABS though it may have been there, not sure.
- sometimes when going over a speed bump or just a minor imperfection in the road I hear a clunk in the front of the car and feel something move in the underside of the car. Happens mostly at lower speeds also, but not if I go over the bump really slowly.
- in the fuse box when I took out the ABS fuses I noticed there was a bit of minor melting/brown burn marks on the top of the connections marked (iirc) ECO3 and ECO4 on the diagram (large white connectors). Is this anything to be concerned about?
- sometimes when I have air coming into the car through the air vents it will become significantly warmer for a few minutes, then slowly go back to normal. Can't think of any circumstance that links the times when this happens (eg. speed, weather etc).
- the oil pan has a leak which is on the list of things to fix when the car works properly.
View 2 Replies
06 GS430 has started making this loud clicking noise when we start the car ... not all the time but very often ... it almost sounds like a jackhammer and is extremely loud. Goes on for a good 20-30 seconds then goes away.
The location sounds like it is coming from the glove box area but not really behind it, more below and behind it..
View 14 Replies
I am having a strange issue with this vehicle that the dealership can't figure out but it doesn't surprise since here they are a bunch of idiots there anyways....well here it goes....when i start the vehicle there is a fairly loud "buzzing" noise coming from the drl module mounted on the front right side fender, the module feels like the relay inside is clicking extremely fast but not actually staying on, the drl's do not come on however the high beam indicator on the dash is illuminated. This will go away when i turn on the low beams, but i still have no high beams. There is a slight flicker within all the interior lights and headlights which leads me to believe there is a ground issue. I am unable to obtain any schematics for this part of the electrical system to be able to back probe and try to isolate the issue.... The vehicle seems to be fine as long as you turn the low beams on as soon as you start it other then the slight flicker in the lighting inside and out.....
View 3 Replies
My daughter asked me to look at & listen to a horrible grinding noise coming from the upper right area of her Santa Fe's rear hatch. There was a plastic grinding noise coming from THIS:
It's the lock actuator for the rear hatch.
Sometimes it works.
Sometimes it doesn't.
Sometimes it makes that horrible plastic grinding noise.
View 4 Replies
For the last two days I've had a very intermittent (tck, tck, tck) sound coming from what sounds like the glove compartment area. It has a rep rate of around three times a second and is very regular. It sounds like a relay to me. It has only lasted less than 20 seconds on each occurrence so don't have time to troubleshoot. I took that area apart and I see two 12volt 25 amp what look like relays just to the right of the glove compartment. I've left that area torn apart so if it happens again I can feel the relays and get it down to one-and or eliminate them as the cause of the noise.
View 1 Replies
I applied brakes while car was moving slowly, less than 10 mph, and heard loud grinding sound coming from left front as car stopped. Shifted to reverse and car barely moved, less than 1 foot, which was accompanied by the loud grinding sound, then stopped. I could find nothing interfering with the wheels but did find pieces of brake pad on the ground along the path the left front wheel had followed. The left front wheel appeared as if the calipers were holding whatever remained of the brake pad and/or backing tight against the rotor. brake pad fell apart on 2002 at 43,561 miles...
View 19 Replies
I just got the car back from repairs, there was a loud grinding noise coming from the left side of the engine. It turned out the whole rack and pinion setup was pouring out fluids and needed to be completely replaced also while it was in there they checked out an oil leak which ended up being the front valve cover and replaced a dead O2 sensor. The car has 99,300 miles
View 6 Replies
This noise happens from time to time with seemingly no rhyme or reason and has been present for some time now.
Here's a video of the noise in question. YouTube
View 2 Replies
The glove box normally opens in a slow and gradual, pneumatic kind of way. I opened it on Friday and it made a grinding noise then just dropped down. The left side hinge has ridges, like cog teeth and I'm guessing whatever gear fits those teeth has fallen out of alignment. The latch still works fine.
View 2 Replies
I have another issue. I just started having problems when braking. Every time I brake there is thing loud grinding noise that sounds like it coming from the back tires but there isn't a squeaking noise like there is where you need new brakes what else could this be??
View 2 Replies
2010 SF Limited, about 46,000 KM.
Heard a grinding noise coming from the back of the truck today. First thing I thought to look at was the rotors. They looked warped/wavy and were really hot. I'm worried that the pads are used up and its metal on metal, really looks like rotor damage. I'm confused by this...
1) I get a safety inspection done every time i'm in for service (6km), no service rep has ever warned me about my pads.
2) Aren't squealers supposed to warn the driver of low pads?
3) Pads wear out faster in the front than they do in the back. How could the back pads be used up already? The front looks fine.
So if my back calipers are seized, or the e-brake line froze, then i'm driving with the back brakes engaged full time. This should not have happened to a truck so young. Do I have a warranty case here?
View 20 Replies
I have a 2007 SF Ltd. About 6 months ago I noticed a tiny grinding noise coming from the front end. I took it to the place that installed the brakes and rotors and had them look at it. The said that they didn't see anything but the cleaned up the rotors and oiled the slide pins. That didn't seem to sold the problem, so I took it to the shop that does all my inspections and such. They mentioned that they didn't see anything and that if if was only first thing in the morning, it might be some very minor rust that is building and being worn off. Lately, the grinding noise has gotten much more consistent and loud. Both places said the pads looked almost new and other than the turning of the rotors, they looked fine. If it isn't the pads or the rotors, what could be causing the grinding noise? A friend of mine had the same issue but his dealer told him that his vehicle "just had noisy brakes". That doesn't see to be an acceptable answer.
View 3 Replies
What could it be? Replace front brakes. Then they said it was front axels, replaced them. Making same noise... grinding and feels like you are hitting brakes when you are not. Sounds like metal on metal. What else can it be? 01 sante fe 180,000 miles v6 awd. It was doing it in reverse but after all of this now just in drive at slow speeds.
View 3 Replies
I have a 2002 Santa Fe that has started to have a very loud rattle. It sounds like it is coming from underneath the vehicle toward the rear, possibly the passenger-side wheel-well, but that specific location just may be an auditory illusion.
[URL] ....
View 4 Replies
My 2004 Santy 3.5L (I am the original owner) just turned 91.4K miles and all of a sudden a VERY LOUD Engine Knocking sound came from the top of the engine. I have been changing my own oil since new with synthetic Mobil 1 and a new filter every time, and I never had any issues. I changed it last week at 90K prior a Spring Break trip (1350 miles).
Then yesterday after I let her rest for 1 day, I took the kids to school and within 10 miles of my house the ticking HARD loud noise started happening. I pulled over near a shop (within 1 block of where the noise started) and they said...don't drive it it sounds like a lifter collapsed, or a rod bearing or something big...
I had her towed to the dealer and the first thing they told me is to gather all the oil change receipts and a "manifesto" and they asked me how often I change the oil... I said every 5K miles. I change my own oil and have done since day 1.
BTW, Timing Belt, Water Pump, tensioners, belts, coolant, spark plugs and coils were changed last year at 77K miles.
The car should still be covered under the 10year/100K Powertrain and I believe they are trying to build a case so Hyundai can cover this or not...
They still need to tell me what's wrong... I change my own oil so I don't have receipts for "oil changes" and I have a log of when oil was changed...
View 23 Replies
I own a 2.7 L v6 Santa Fe, 2004 with almost 50k miles on it.
When I accelerate and hit approximately 1.9k RPM I can hear a light grinding noise underneath the car. This happens both in 2nd and 3rd gear. So as it's accelerating up I can hear it, and when the car shifts up and the RPMs drop it will make the noise again as it passes through the same RPM range.
The noise is always there at 1.9k to approx 2.1k RPMs.
Also of note is that the sound is either gone or significantly reduced after driving around for a while. I don't notice it after freeway driving, for example.
View 2 Replies
My 2007 Santa Fe Limited 3.3L with 102,000 miles started making a grinding/ticking noise yesterday. It's hard to tell but it sounds like its coming from directly under the center console. The noise is directly proportional to the speed and if I put my hand on the shift selector, I can feel the tick vibrations. It drives and shifts fine. What it could be? I'm hoping it's not a transmission issue. I'm thinking something with the AWD connection to the rear wheels.
View 1 Replies
When I start my vehicle, it makes a grinding noise, sounds like it's coming from the front of the vehicle, when I put into gear it stops. It started gradual and is getting worse. It's a 6 cylinder automatic, with 108 k miles.
View 3 Replies
Codes currently on ecm: P0134, P2125, P1174, P0735 My 2003 Santa Fe 2wd 3.5l with 160,000 miles was driving fine, then all the sudden whenever I reach about 3500 rpms there's a grinding noise that sounds like its coming from near or in the automatic transmission. As for the codes: P0134- I just replaced the o2 sensor with an oem part from autozone, so not sure why that's popping up. The connections look fine. P2125 and P1174- I'm trying to figure out whether the accelerator position sensor or throttle position sensor needs to be replaced. I have a multimeter but don't know if that will be able to tell me which one is out. The P0735 gear 5 incorrect ratio and grinding noise at 3500 rpms is what I am mostly worried about though. Could a transmission flush work with that?
View 2 Replies
