My car has occasionally been exhibiting some stiffness when turning left, a harder turn and when going more slowly (like parking). It feels like a loss of power steering. There's no squeal and the fluid is full, although I don't know the last time it was changed. So far it hasn't happened when turning right.
View 6 Replies2K 1.8T Golf. Lowered on Koni struts and neuspeed street (red) springs last year. Rear axel bushing done soon after. Replaced front and rear strut mounts and bearings at the time of struts and springs. Rack died on me in the fall so I had it replaced along with newer control arms and upgraded bushings. Aligned right after the rack was installed and ran like an arrow until last weekend. Now it pull to right, more as I speed up. I also noticed that when I turn left, the steering is much stiffer then steering left (full turns and mild turns).
PS fluid is still full. My ball joints are about 3 years old so I'm leaning towards that direction. Especially after this past winter and the never ending pot holes in Detroit. The shop used moogs and were regularly greased as they had zerk fittings. I think I hear some clunking upfront but I'm unclear as my old GHL Muffler weld finally gave out and is having by a hockey lace and it is rattling every time I accelerate or hit a bump. I'm going to jack it up this weekend to do some exhaust work so I'll give it a good once over and shake down what I can.
I bought an '08 Elantra about a month ago. A few weeks after buying it i noticed a creaking noise while turning the steering wheel to the left. It happens at low speeds or when stopped, but I haven't heard anything at high speeds. I can't tell for sure but it sounds closer to the inside of the car than the outside and will happen the entire time the steering wheel is turning to the left. No sound turning it to the right.
My brother liked my car so we test drove 3 other Elantras, 2 '08s and an '09. Two of them made the exact same noise. He ended up liking the one that didn't but after a while his started making the EXACT same noise too. I'm thinking this must be a common problem with the '07-'10 Elantras as all 4 cars had the same noise, but I can't find anything about it.
My right strut is bad and I'm having both front struts replaced Monday, so if it's something that can be done while he's doing the struts I'd like to find out before he takes everything apart so he doesn't have to do it twice.
I have a '01 Elantra with 145,000 miles on it. Recently I've noticed a slight scraping noise coming from the right front wheel whenever I turn the steering wheel to the left. The sharper I turn, the more pronounced the noise is. However,it is not a loud noise; I can only hear it when I have the windows down. Braking has no effect on the sound whatsoever. I'm thinking it could be a wheel bearing that's just beginning to go bad? Could it be a CV joint? Does this sound like something I should get fixed right away, or could I wait and see if it gets worse?
View 6 RepliesScraping noise in front end when turning left. Have changed brake pads, calipers, and rotors on both front wheels. There was no scraping noise before changing.
View 2 RepliesMy 2006 santa fe drives great,,,except now it makes a low squeaky noise when parking and turning the steering left or right...it does not make that noise while driving at any speed in a line or on bumps...the strut top plates? can i just grease that?
View 2 RepliesI have a 2002 Camry LE V6 with 200K on it and have noticed that the steering feels very stiff while driving and turning. I have checked the fluid, air pressure on tires and that is fine.
View 5 RepliesWhen I make right turns. Its as if the power steering does not work. It is not constant, no issues making left turns, and seems to happen more often in cold weather. About 5 years ago i had a recall to replace the steering column and thought that may have been the issue but took my car in for the recall, they replaced the steering column and still have the same issue.
View 5 RepliesRecently had 2012 ES350 aligned at about 14,000 miles. Drives fairly straight at lower speeds on most roads, but on interstate has sharp left pull in left lane at around 65 mph and above. I am aware of road crown, but, in contrast to left lane pull, car has virtually no pull either way in right lane and tends to drive straight; steering at least seems to be stiffer than when I bought it and much stiffer than it seems an ES350 ought to be.
View 10 RepliesMy steering wheel has a squeak when turning either left or right slightly from center.. I usually notice the squeak while stationary or parking. It's louder and more noticeable when it's hot outside.
Listening carefully, it seems to be coming from inside the steering column, not from linkages or joints from under the car. Looking for a exploded diagram of the steering column components, perhaps it's just a U joint (tilt?) that needs some lubing to make it quiet.
I'm having an issue with my 2004 Elantra.
When I turn the ignition in my car, it makes a very loud noise at the front of the car. This goes away after about 3 seconds, but when I turn the wheel to either side, it makes a very high screeching sound. This persists until I've been driving for a few minutes then it goes away.
I hesitate to say the following, but it also feels as if my steering wheel is a bit "harder" to turn, but maybe it is my imagination. What it could be? I checked power steering fluid and it is at normal levels.
4 cylinder Japan built camry se manual trans ... 158k miles
Steering got stiff/lumpy driving to work today...trying to figure out if it's the rack or the pump.
Pump isn't squealing but makes a tiny bit more noise when turning left or right(when parked)...but I'm not sure its more then normal.
No leaking fluid. Fluid reservoir is filled to the correct level. No torn boots etx.
Steering feels fine driving straight down the road but when turning it's gets stiff and harder, esp going right.
She called me to inform me that ABS and ESC lights came on and the steering was very loose. I told her to shut off the car and restart to see if it made a difference. She did and now the EPS light has come on along with the other two and she said the steering has now become stiff (power steering it seems). I will be hooking up my OBDII to see if I find any fault codes?
No buttons were pressed by the way. Everything has been working fine for the last 6 months. Only had to bring it in for an unrelated issue recently.
I have an 01 Hyundai Elantra that has had power steering problems for awhile.
Awhile back, when we would fire it up, we'd get a loud screech. Eventually, my father in law replaced the power steering pump and belt.
Now there is a new issue. Ever since he has replaced that, on start up, there's a small screech and when turning out of a parking space, the steering wheel is tough as if the power steering isn't working.
I was thinking it's the power steering pump pulley, but can't seem to find any real stores that just sell the pulley itself. I did see the pulley have a minor wobble in it when examining it. Thinking maybe its the bearings on the pulley.
Very recently the brake pedal in my car has been stiff (won't depress all of the way down) after starting up the car when it's been sitting for a while. It takes a few presses of pedal for it to feel normal again.
I did some research and turned up a vacuum leak as a possible cause. I also wondered if a flush/bleed would be a possible fix for something like this.
I bought a 02 elantra gt for a good price and had about 120,000 miles. The car had after market 18" rims on it and i planned to take them off since i don't like rims anyway and the rims were making the car bouncy and didn't ride right. So i got the recommended tire size for an elantra which is 195-60r-15 and put them on. while taking off the rims I realized that there was some clamps on the suspension and I didn't know what they did so i just took them off as well. What i have noticed is that the ride is very very harsh. I feel every bump on the road which you kind of get used to but when a bad bump comes on the road it feels like the car just got dropped from the air, its literally bad and i cant return the car since i bought it "as is". At first i thought it was the tires or tire pressure but this seems way worse just to be tire pressure. I just want a smooth riding car. The car seems lower like there isn't much space between the top of the tire and the hood of the car.
View 5 RepliesThe gear shifter in my auto trans 05 Elantra is really stiff when shifting different gears. I was running fine as I went to work and back today with no problems. After I got back from work, the car was off for 30-40 mins. Then I went back and started the car and the gear shifter was stiff but still shiftable. I checked under the car to and fluid leaks but didn't see anything. What may be the issue here?
View 3 RepliesMy sister has a Camry that has a squeak in the steering wheel occasionally when you turn the wheel. She lives in another state, and so I'm only going by her description, but I'll be visiting soon.
She describes it as an intermittent squeak/groan when the wheel is turned. I think it may be plastic on plastic, but it is definitely coming from the area around the column (up by the combo switch and ignition switch area), not down by your feet, she says.
I'm not sure of the year, but it is in the 2001-2003 range, I believe. I think this is just an annoyance thing, not a mechanical problem.
I have a 2004 F150 SCrew 4x4 with the 4.6 (260K)... My steering wheel occasionally 'clicks' when turning - It sounds and feels like a bearing is bad in the steering column.
When it happens, it feels like one in the bearing is binding- the steering wheel slightly binds, then there's a 'pop' like the ball snapped back into place. This only happens occasionally. Sometimes it will pop with every revolution of the steering wheel, other times not at all.
Originally, I thought it was a U-joint, but it seems like the noise is coming from the bottom of the column...
I took a trip up to New Hampshire about a month ago and on the way back I noticed when turning left on the highways (Not fully turning but on like say an offramp) I would hear a thumping sound coming from the front left side tire. When I got back onto the island it was not as noticeable I guess mainly due to the fact that we don't really have offramps like up in New England that could replicate that sound.
However to make a long story short tonight I was backing up into my driveway and noticed that while turning the wheel I heard that same tapping noise coming from the same tire. It is hard to explain but it is definitely not from the brakes because it was making the sound while turning with no brakes applied. What this could be?
I have a 01 Chrysler Sebring 4D Sedan. I have been working on cars many years, never done tie rods. This my first attempt, I messed something up I believe. I replaced both inner tie rods and outer ends. I followed what I thought was correct procedure., counted turns on ends coming off. Installed new ones the same amount of turns. Before I did this the steering was fine. Now when I turn sharp to the right or left, like turning in to a driveway, I get an awful binding grinding noise, and I can feel it shimmy in the wheel. It will even stop the car going hard right. I can see evidence of rubbing on the CV boot closest to the wheel on the pass side. I assume I messed up somewhere with setting the steering when I installed the Tie rod ends to the wheel hubs.
View 19 Replies