On my 2000 Ex my overhead console screen does not work. I have searched and found a few F series ones but nothing about the removal of the huge console. Is it pretty much the same process?
View 4 RepliesThe overhead council temp/compass/ mpg on my 2000 xlt stopped working, who has fixed this already?
View 6 RepliesI have an 03 F350 Lariat, the overhead console display quit working awhile back (about 18 months ago) and so far my only option is to buy a new one from Ford. I have looked online, on ebay, local wreckers and have come up with nothing. I have come close a few times but the wrecks didn't have a sunroof so the display is different. I searched and found ways to fix the resistors but mine do not seem to have the poor solder problem that some do. Where I can find a replacement display?
View 1 RepliesMy overhead with temp, compass and mpg stopped working.
View 11 RepliesThe read out light on my overhead console (the read out that tells the awesome fuel mileage Im getting) isnt working, and hasnt been since I got my excursion a month ago. Thats the only thing on it that doesnt work and was wondering if it could be a bulb, or is this a common problem and if so whats the fix?
View 10 RepliesWife just told me tonight that the overhead console and rear heater are not working in the excursion. Of course, we have a 3 hour drive tomorrow and it is cold outside.. The posts seem to center on either the readout not working or the heater not working, but not both. Trying to minimize time troubleshooting outside in the cold.
View 4 RepliesThe little screen that shows the MPG and outside temp went out a few months back. Getting close to winter so i'm getting more interested in fixing it if it's a simple thing. Where I should start? AFAIK, everything else works fine. This is on a 2000 Limited.
View 14 RepliesHow to remove the overhead console in my Excursion? I just want to make sure I dont break it.
View 6 RepliesI was taking off my console and I noticed this connection not being used. What's it for?
View 11 RepliesCEL - code escaping me but it said #7 glow plug (ordered a scantool yesterday).
Shifting - its at lowest been in the 30's and the truck has issues shifting until its warm. Its wierd, its like the water temp gauge stays at cold, then snaps up and shifting is fine from then on. Takes what I think is a long time to get there, not a gradual temp change, just like click and the gauge is on.
Lots of electrical looking issues, maybe all tied together?
- Shut doors sometimes flashers blink
- Overhead console no longer lights up
- Door ajar and overhead lights on when doors are tight
- more oddities but I can't think of them now
As far as I can tell, Expeditions, Excursions and Navigators all had this same part in them but for whatever reason it seems like it's next to impossible to find on its own - I don't want to buy a whole overhead console for one part.
Here is what I'm talking about:
I want to replace the lens and buttons, not just the missing button (which is somewhere inside my truck)
Is it Part #5 on this? [URL] ....
I can't find an individual part # - Is it because the overhead console was sold as a whole?
Do the Ford Expedition overhead console is identical to the Excursion? I have an '04 XLT and the overhead console is damaged. I found a replacement unit for the '04 Expedition in the same color and the seller has no idea if the units are interchangeable.
View 2 Replies'05 Ex overhead console temp is showing -40 deg... Had the board out looking for loose diodes, didn't see any. Have any of you ran into this before?
View 14 RepliesI need to pull my front overhead console to make some changes, gonna try to mount my sirius cradle up there to get it out of the way. Can't figure out how it is fastened up there. Also, I need to pull the cover off the rear seat DVD player as I want to solder in some RCA's onto the aux in. Can't figure this one out either, and I'm afraid to break the cover.
View 4 RepliesHow do I reset my overhead display? I know you press both buttons, but then it says I need to set a zone. What zone I set it too?
View 3 RepliesLooking for a replacement part for the Copper Ring that bulb screws into? Attached is a picture I copied from a previous post. Notice the copper ring. On mine 2000 Excursion one of these rings is broken.
View 14 RepliesI just picked up an 05 6.0 Limited and love it, but I can't figure out the overhead temperature gauge. It shows -40 degrees no matter what, but if I hit the outside temp button on the climate control, it shows the (mostly) correct temp. I verified that the temp sensor in front of the radiator is still there and hooked up, and it seems to me that Ford wouldn't go to the expense of using separate sensors for each readout, so I'm guessing that the problem is in the overhead unit itself. All of the other functions (compass, mileage, range) work just fine. I've seen several threads about the overhead dying completely as chips rattle loose. Is it also common for just specific functions to go out as things start to shake apart?
View 14 RepliesI have checked the fuses, Checked the relays, Checked for pinched wires and checked for a loose connection at the fuse box, Both power mirrors and the overhead console lights do not work, Power windows work fine, Manual seats .
View 1 RepliesI know that this horse has been beaten to death but after searching all the posts and web. I have recently aquired an overhead console and wiring harness from a 2000 F250 and want to install it in my 2001 F250 which did not come with one. The connector behind the passenger kickplate is different so I assume I'll be doing some wire splicing. After reading all the previous posts, I'm unable to find old bird. Apparently he's not around anymore. Looking for the template/wiring instructions for this retrofit?
View 3 RepliesHow to recalibrate the temp on the overhead display?
View 9 Replies2000 F-150 5.4 scab 4x4
Every light on my overhead display would flash on and off randomly. I pulled it and one 510 was dangling and the other fell off when I touched it. They have been properly re-soldered. It still doesn't work after re-solder. I am trying to figure out which wire is the power and which is ground so I can test if power is getting to the board.
There are 6 wires. On one side is blue w/orange stripe, gray w/ black stripe, and white w/ blue stripe. The other side is pink w/ black stripe, blue w/ red stripe, and black w/ blue stripe. The fuse that the overhead console is on isn't blown since my 4x4 and abs is working.