Ford F-150 (2004-2008) :: Slight Shimmy In Back End When Coming To A Stop And Accelerate
Dec 3, 2012
I have a 2008 ford f150 4.7 liter 4x2 & the problem I am having is when coming to a stop when I accelerate there is a slight shimmy in back end or could be described as a vibration for just a few seconds and then you don't feel it anymore until you come to a stop & restart. Once you have pulled off it will not do it anymore out on road. I checked fluid & it is not low in back end. Transmission shifts good so what could cause this.
View 2 Replies
Advertisement
When I accelerate from a dead stop I have this squeaking that comes from the back of the truck that goes away after a few seconds. Then when I get up to about 50mph I have this really annoying vibration. Its not a real heavy vibration but it is there. I am thinking it could be the universal joints, am I way off here or what?
View 6 Replies
My isf for couple months now and love the car. I have an 08 which only 7k miles on it. Lets say at a stop I start to accelerate, I notice a slight hesitation before it picks up around 1-1.5 rpms. Under hard acceleration I don't notice it, but with nice and easy acceleration that slight hesitation is kinda annoying. Not sure since car has such low miles on it if I need to run fuel injection cleaner or something, of if something else could be wrong. I kinda mention it to the lexus service manager and he said something that next time I bring the car in that he'll let the mechanic do a tranny ecu update of some sort? I didn't know that there was such a thing.
View 14 Replies
This morning as I was driving to work, my truck hesitated as I tried to accelerate from a stop sign. I pressed the pedal and nothing, almost felt like it was going to stall. After about 3 seconds it started driving again and I had no further issues. It seems to only do this in the morning when it is cold. It has done this a couple of times before, but usually it recovers almost immediately. I had no CEL come on. 2007 F150.....
View 1 Replies
08' 4x4. I changed the front brake hoses because the truck felt like it was dragging a bit, when i would hit the gas from a stop, that seemed to work, I also changed the front rotors because when braking I was getting a pulsing feeling in the brake pedal. that fixed that.
Now I feel like there is still a bit of a slight drag when I'm at a stop and let off the brake. when im on level ground the truck creeps forward from a stop when letting off the brake, on the slightest incline the truck wont go forward at all.
Do the truck want to move forward on a tiny incline or no?
View 7 Replies
i have a 04 f150 2WD I've been noticing a slight vibration on initial takeoff, it only lasts for a couple of seconds then it goes away. I have the "non serviceable drive shaft" the u joints are staked into the yoke. there is some up and down play where the drive shaft goes into the transmission extension housing. Does that play is normal or what may be causing the vibration?
View 3 Replies
I have a 2008 Honda Odyssey. Lately, we've been bothered by a sweet smell, particularly when coming to a stop at the bottom of a hill or acceleration uphill. The smell is most noticeable from the two front, center AC vents. The dealer swears it's not a hose or heater core issue. He also checked the cabin air filter. AC "on" and recirc "on" seem to exacerbate the problem.
View 3 Replies
My truck had a slight vibration at idle today and what i noticed the most was i was looking at the top of the motor and i noticed that the fluid in the power steering reservoir was shaking back and forth like i was shaking the container. Is this from the vibration or is the power steering system vibrating. I have had this truck for two weeks and it has 135k on it. It is the 5.4 motor...
View 1 Replies
I have been experiencing a slight hesitation when I accelerate from a stop. It almost feels like its going to stall for a brief second then it picks up and accelerates normal until I'm at a complete stop again. I have the 2016 sport with the standard 2.4L. I currently have 2200 miles on it now and when I go in for my initial suggested oil change at 3000 miles ...
View 25 Replies
I have a 2004 F150 5.4 Triton. When coming to a stop the truck starts a rough idle then dies like it ran out of fuel. The tank is full. It is an intermittent problem but is getting slightly worse. It mostly happens after reaching operating temperature. Also there is the dreaded ticking sound once the problem start. Brought it to the dealership and after they had it for four days they said it stalled once and recommended replacing the motor! They could not answer the question as to why to replace the motor. No codes or warning lights are coming on when it dies.
View 2 Replies
My 2006 F150 was purchased by me in early 2009 with about 28,000 miles on it. It's an XLT crew cab 4X4 with the 5.4. Stock except for a leveling kit and an aftermarket head unit. It currently has about 59,000 miles and has been babied since I purchased it. About 3 years ago I started noting some issues:
A. Oil pressure dummy gauge is all over the place. Some times it will show no oil pressure. Other times it is all the way to the highest mark. Other times the needle has gone 180 degrees past where normal is and is actualy pointing straight down towards the floor.
B. Recently my alternator dummy gauge has started doing the same thing as my oil pressure gauge.
C. The backlight behind my odometer works intermittently, but mostly not at all.
D. My dome light will flicker when first turned on. It doesn't matter which door is opened or if the override switch it turned on. It takes several seconds to come on and will flicker like there is a poor connection somewhere, but stays on once its on.
E. Blower fan will occasionally stop blowing. Once the climate control switch is turned to off, then back to on it resumes working. This doesn't happen often, but does occasionally.
Fortunately, the truck has not left me stranded and I want to keep it that way. We are getting ready to sale my wife's Toyota and this will become her daily driver. I want to take care of any issues before she starts driving it. Are these all separate issues or is there one common issue which could be causing them all?
View 1 Replies
My mom gave me a 2004 f150 lariat with a 5.4l and were having an issue with the engine when coming to a stop the engine wants to stall out and runs like a bag of hammers and sounds like its going to explode then i give it a shot of fuel and it runs fine for a a while and then does it again. I brought it to the local dealer and he said it was either the vct or the cam phaser bank 2 so i changed both and it still does it just wondering before I keep getting intake cam sensor code retarded and a bunch of other codes but we replaced the cam sensor already.
View 2 Replies
I have a high pitched squeal coming from the back windows during operation. I am pretty confident it's not the window assembly itself (linkage, track, etc in the door), but rather the weatherstripping type material that physically lays against the glass at the bottom of the window opening on the door. This happens in both up and down directions of the window.
It DOES NOT squeal when the material is wet, and thus is the reason that I've been able to pinpoint the cause. It's likely that the window channels could be contributing to this as well. The problem is...I don't know how to solve this without applying a lubricant that will smear/streak my windows.
I've already taken clean rags and wiped both the inner and outer portions of this material to remove dirt and dust that they gather...no change in the noise. Is there a way to "condition" the material so they will soften up, without leaving a residue that will streak the window?
View 10 Replies
I am new to the toyota brand and the avalon. I am trying to learn as much as i can ..so my question is i want to do a tune up to my wife's car ... and I am noticing a slight wining noise coming from the car as you accelerate i remember seeing a post on that a little while back but I can't seem to find it ....
View 4 Replies
Brakes shimmy on my 05 f150. Been doing this since new new pads and rotors and alignment. what now?
View 5 Replies
The seat will rock back and forth as you accelerate or come to a stop. Extremely annoying.
View 13 Replies
08 XLT 4x4 Had a rotor slid freeze up last fall and eat a rotor. 39000 miles. Took apart and cleaned up and lubed, new pads and rotors both fronts. Now have pulsating pedal at 48000. Do the rear might need attention now or still the front? I never use the E brake.
View 2 Replies
A little about my truck. E99 F-350 crew cab long bed dually 4x4 223K miles. 4.10 gears with LS in rear.
I bought the truck June 2016. I ended up wrecking the truck on the test drive. Thought it was a 4 way stop and pulled out in front of a lady and she ran into the passenger side tire. Only damage that was on the truck was a busted tire, and the fender smashed in. Some how missed the door and the bumper.
I replaced all the front end: u-joints, ball joints, steering linkage, brakes, rotors, calipers, and all the u-joints in both of the drive shafts, also changed the fluid in both axles.
I have started to notice a slight "vibration" "shimmy" while driving down the road. Mainly while in a curve or changing lanes; applying pressure to the steering wheel one or the other. Tires have been balanced, and rotated several different times now with no luck at all.
While backing up, I can feel something "popping" "clunking" especially while turning. Like backing out of a parking space.
Insert troubleshooting:
Jack truck up and put on jack stands.
- Pull and shake all tires. --No movement
- Put in drive and watch all the rear end. --Nothing shaking or out of sync.
- Put truck in 4wd, hard to engage, watch front end. --Nothing shaking or out of sync.
- Turn tires to full lock. --Drive line starts clanking and shaking and rear tires acting funny.
- Turn tires straight. --Problem goes away.
- Put truck back in 2wd. --No problems when turning wheel lock to lock.
- Drive to empty parking lot. --Mainly feel problem while backing up, really have to feel for it. Most people call me insane.
- Lock the front axle. --No difference.
- Put in 4wd. Drive straight --No difference.
- In 4wd while turning. --Truck wants to act like it is fully locked in the rear and will bind up and slip a tire. You really have to give it some fuel to make it even try to move, and its almost like the truck wants to fold in half on itself. Cant keep the steering wheel in one spot as it keeps "jumping" on me.
- Put in 2wd. --Acts the same way until the truck fully comes out of 4wd then smooths back out to where you have to really feel for it. 4wd light stays on forever, before going off later in life.
- Put in 4low. --Gears grind and will not engage.
Would this indicate that the transfer case is messing up on me? Why would the rear axle feel like it is locked when in 4wd?
View 2 Replies
I've recently bought an 09 Passat Estate, which so far I love - even the bits others complain about like the handbrake etc.... however, I do have a slightly annoying rattle occasionally at the back of the car - its not bad, but seems to be coming from the passenger side rear, maybe around the parcel shelf area.
Mean time, its a case of trying the car with shelf out, seats up/down etc to see if they are the cause.
View 1 Replies
Picked up my MK6 GTI DSG last Saturday. I have noticed a slight shudder when braking and coming to a gentle stop. At first I thought it may be the brakes bedding in so I kept it over the weekend. By today there's still no change. Is it normal for DSG transmission stop like this? Because I have never driven DSG transmission.
View 11 Replies
2008 golf city... So I bought this car about 2 years ago and the last couple weeks its had trouble starting and will sometimes stall out when your about to accelerate (from a stop sign) the mechanic I go to replaced the a couple relays under the drivers side dash, however I it hasn't made it better it actually made it worse as now it won't start at all the last 2 days. It rolls over and tries to start just doesn't. Its my only car and I already missed a week of work for it ( I commute ) I need it fixed. I believe the relays where the EMC is what he said number 249 I believe.
View 3 Replies
