Ford F-150 (2009-2014) :: 2011 - Grinding Noise / High Pitched Squeal On Front End?
Feb 26, 2012
This evening, my F150 with 2,600 miles developed a high pitched squeal, much like you might experience on an older vehicle with failing front brakes. Yes, that same squeal/grind the brakes make...metal on metal. It came in instantly while at highway speeds. It was VERY loud. The pitch didn't really change with speed...it was pretty consistant going slow or fast. There was no vibration, chatter or growl as I would expect with a failing bearing.
It was definately in the driveline/brakes. I was 10 miles away from a friends house, so I turned around and took it back to his place. Shortly after turning around, it quieted, only sounding when I would turn ( like a wheel bearing would when being side loaded ). I looked at the brake disks, thinking something was grinding on one of them. The outsides of the disks looked fine. Due to the shields on the inside, I couldn't see.
Later in the evening, I had to drive it back home, about 50 miles. Again, it was quiet unless turning fairly hard. By the time I got home, the squeal had turned into an intermitant growl/thump, as if a warped rotor was banging on the caliper. The noise was 1 to 1 with the rotation of the driveline. But still no vibration. Brakes work perfectly and the noise doesn't change with brake use. Backing up and turning hard results in a variety of sounds, including squeaks.
The hubs and CV joints felt cool. The brake disks were not hot as if they were dragging.
It is 4x4 / 3.7l
View 14 Replies
Advertisement
Today I was out getting lunch in my Ecoboost When it started making an extremely loud grinding noise from the front end of the truck. My first thought was I blew a turbo. After holding the break and building boost I discovered it was not the source of the noise. Also the truck runs perfect and there is no smoke. I then took it to my friends auto shop and pulled both front tires off to check and see if anything break related came loose. We found nothing. The noise only happens upon acceleration or cruising throttle, as soon as you let off the sound goes away. So after I found nothing I took it to ford and what would cause that, but they assured me that they would have my truck for a long time while they figure out the issue.
View 14 Replies
I have a 2wd 2011 F150 90K with grinding noise coming from the drivers side front tire. Even though it was happening when coasting I thought it might be pads but they are real good. Turning the hub with no tire on it I can hear a little grinding. So I suspect bearings. I want to remove the hub but can't find out how to pull that off.
Where I would expect to find a spindle nut there is an area where it looks like you put a puller in. Can't find any videos or other information on the "Internets". Maybe I'm the first to have bad bearings? Anyway, how to remove the hub?
View 9 Replies
I recently purchased a used 2009 Kia Rio. I really am enjoying the car. While there is nothing fancy to it, it gets me to and from work and that's basically what I need. However, when I apply the brakes, there is a high-pitched squeal that is made until the car is almost at a stop. It does this I would say 90% of the time. The brakes work just fine and are in fact very sensitive. I've tried researching this online and it seems a lot of people have this problem because of the type of brake pad used. The dealership I purchased it from is more than an hour away from my home, so I am reluctant to drive down there if there really is nothing that will be done.
View 3 Replies
So, last week, I heard this high pitched squeal coming from the wheel well. At low speeds it seemed. It was in a parking garage.
But then, it disappeared. All of a sudden, I'm reversing into a spot barely touching the brake and it's squealing again.
I then take it again for a spin around the garage, no sound. I reverse again, no sound.
A few days later, I'm pulling out of the garage and the sound is so loud my GF could hear it from within another car behind me. It squeals until I start going faster and I'm on the highway. I get to my destination, ask my friend who is good with cars to check it out. But of course, I couldn't recreate the sound. Tried going slow, backing up, braking, going faster, etc.
So, do you know of a sound that would be very loud one day and completely go away the next? I saw some things about a shim or clip on the brake pad possibly touching the rotor or is loose?
View 6 Replies
I did a search for this symptom but didn't see anything that sounded right... High pitched squeal from right front wheel well area (sounds like a tea kettle actually).
Starts at 10+mph and is speed variable (faster=louder)... but not effected by applying the brakes (so doesn't seem to be related to the brake assembly)... It doesn't happen all the time... but getting more frequent... annoying...
wheel bearing?
air suspension?
What it could be?
View 14 Replies
A high pitched squeal appears to come from the front of the a/c compressor whenever the clutch engages. When the clutch disengages the compressor stops spinning, and the squeal stops. I can watch and listen to this as the system cycles with the a/c switched on. If I turn off the a/c, no squeal. I'm guessing the bearings in the compressor are going out. However, the system still cools normally, so apparently no gas has leaked out.
Does this imply the compressor must be replaced, or could injection of some oil into the system possibly fix it...?
This car only has 73,000 miles on it. I've owned 2 other TB's and a couple classic Mustangs with much higher miles and never seen an a/c compressor bearings fail.
View 1 Replies
2007 Sonata SE, 74,000 miles
Just took the car in for brake service (not the dealership) because of what I was convinced was a brake pad sensor warning sound - something I've heard with other cars I've had, and been correct about. However, the tech said the pads were fine.
The sound is a high pitched squeal, intermittent, coming from the passenger front wheel. It can be heard when coasting at moderate speed (30 mph or so), not so much when accelerating, and especially when turning left. It got worse today, with a low grinding sound at moderately slow braking speed that started after about two hours of start and stop driving (house hunting). The car has needed a couple re-alignments and will have to get checked for possible camber? adjustment (rear tires wore badly on outside edges, far less pronounced on front tires). Car has tendency to pull to the right.
Any thoughts on a main culprit here for the squealing-grinding noise or about the possible inter-relatedness of symptoms.
View 21 Replies
Wife's 2010 F150 4x4 85000 KMs makes grinding / ratcheting noise in LH front axle when in 2 wheel drive. Mostly when turning left some times when traveling straight never when turning right. Never makes the noise when in four wheel drive. I am suspecting the auto hub is the issue but wonder if others have had this trouble ?
View 5 Replies
First off I have a 2009 F150 4wd 4.6L truck...we have noticed a grinding noise on the front driver side wheel...we have replaced the auto locking hub acuator and the hub assembly but the noise is still there....it has us puzzled now not sure what it could be. I have read many different threads on this issue an it seems that it might be something to do with the vacuum. The noise is only on the driver side and only in 2wd, when its in 4wd it doesn't make the noise at all. Also while in 2wd the noise seems to go away when we let off the gas.
View 5 Replies
Just installed new actuator and wheel hub assembly on my 2009 f150,truck still had grinding noise in front passenger wheel , New solenoid and vacuum hose kit installed when test drove noise still there until you put the truck in 4 wheel drive it disappears . The noise returns as soon as you take it out of 4 wheel drive. Also mechanic said steering was tight,installed new shaft same thing, could this be the rack and pinion.
View 5 Replies
Reading thru all the squealing noise posts made me want to ask about mine. I have started to notice a high pitched squeal/squeak that occurs while sitting stopped with your foot on the brake...then let off the brake and take off and get this momentary squeak that doesn't continue (at least I can't hear it). It seems to stop once you get going again.
Seems to be coming from the passenger side front. I think I started noticing this after my most recent tire rotation and balance. What the brake wear indicator sounds like or if I will get an icon on the mfi when the brakes need service. The brakes do not squeal when in use. I currently have 27000 miles.
View 3 Replies
I replace my brake pads and rotors in the fall of 2015 with EBC parts. Now almost 13,000 miles later, I started hearing grinding and metal-on-metal contact in the front. So I went out and got PowerStop pads to replace the EBC (EBC had way too much brake dust). I took off the front wheels and noticed that the DF pads had about 1/32 left on them, ok I guess its time to change them out. Onto the PF pads, I find that there is almost no material left, in fact I could scrap off what was left of the material. I decided to do a rotation while I am at it and noticed that the rear brake pads on both sides look like I never used them!! Is it really that possible to have 2 stuck calipers, both on the rear at the same time?
View 2 Replies
2011 F150 Limited 4wd 6.2 liter. I just bought the truck a few weeks ago with 26,000 miles. Late last week I began hearing a mild grind/rustling noise that appears to come from the driver's front. It's not terribly loud (loud enough to hear), but it's annoying. It happens when I slow down (on and off the brake and below 25-30 mph) as well as let off and begin to speed up. It doesn't last but a second after I let off the brake and speed up though. The kicker is it does not happen all of the time. I drove it home from work last night and it did not do it one time, but driving to work this morning it happened every time I did what I described above. I have taken it to our local tire/suspension shop and they claim they could not reproduce the sound which does not surprise me. They did a full inspection and found nothing.
View 14 Replies
My 2002 PSD X with 258K miles has a high pitched squeal in the engine compartment. I only had a minute to look at it as my wife was leaving with it. But, I was able to stick my head under the hood and it seems like it is coming from the front of the engine. Trying to pinpoint where the squeal is coming from with all of the other engine noises is tough. I suspect one of the bearings up there like idler pulley, tensioner pulley, alternator, AC compressor, water pump. The alternator has about 70K miles. The other items I don't know.
View 5 Replies
I've got a 2007 pontiac grand prix that I picked up off a guy for $900 and so far it's been a head ache. So far, I've had to replace the power steering pump, pump lining, there's a hole in the radiator, and now a mystery problem that me and my lack of car knowledge can't diagnose.
Smoke/steam (smells burned) is coming from behind the engine and when the wheels are turned, it sounds like a high pitched grinding noise. I checked the oil, its fine. I filled the radiator with water as a temporary fix until I can afford to get the radiator fixed or repaired. Air conditioning only works on max setting. Before the problem occurred, I was pouring water into the extra reservoir when my friend started the car. Maybe the radiator sucked up some air while I was filling the reservoir.
View 4 Replies
I have an '08 Ranger, automatic. For the last several months, the truck has been making an intermittent high-pitched squeal/whine, but only after it has been warmed up (10--15 minutes driving) and only while it is idling. As soon as I'm driving, the whine stops; whine will occur both in drive (but stopped) and in park. The whine will not happen every day I drove, nor will it happen at every stop. When it does squeal, the squeal will fade in and out in volume.
An interesting kicker I've found recently: it seems to be dependent on electrical draw. For example, if I'm sitting idle with the lights on, and the truck is squealing, and then I turn the lights off, it suddenly squeals less. Still squeals, but less than with the lights on.
I have had mechanics check all the usual suspects, belts, etc, but have not found anything amiss. Nor can I actually get the squeal to occur when I visit the mechanics.
View 4 Replies
I just bought a 2006 F150 SuperCrew with a 5.4L engine and since the weather has turned cold, I've noticed an intermittent high pitched squeal coming from the engine compartment. I've replaced the serpentine belt and the idler pulley plus another belt pulley but none of the above worked.
I've also had two separate mechanics look at the problem and both are at a loss as to what could be causing the noise. The guess is maybe its an air leak coming from either the intake or vacuum lines. But nobody is really sure.
The noise seems to really become noticeable when the temperature gets below 20 degrees and around 2000 rpms, but sometimes it happens at other times. Where this extremely annoying sound might be coming from?
View 14 Replies
My truck started making this whistling sound a few thousand miles ago. Its a high pitched squeal coming from somewhere under the hood. There doesn't seem to be any pattern or certain time when it does it. Ive read on here about an alternator problem on these trucks. Or could it be my S&B intake?
View 13 Replies
I have a 2006 350. When I am pulling my camp trailer (about 12,500 lbs) up a grade I hear a fan or blower turn on and I get a high pitched squeal. It will also have a beep and my in dash display will say high engine temp. I have a bullydog pmt programmer (i tow with it in stock mode) the display will show my coolant temp at about 180 degrees. If I pull over and let it idle for about 2 minutes the warning clears and the temp gauge returns to normal. the display reads about 180 degrees the whole time this goes on. I know the engine is not over heating so why do i get this warning and squeal?
View 4 Replies
I have a high pitched squeal coming from the back windows during operation. I am pretty confident it's not the window assembly itself (linkage, track, etc in the door), but rather the weatherstripping type material that physically lays against the glass at the bottom of the window opening on the door. This happens in both up and down directions of the window.
It DOES NOT squeal when the material is wet, and thus is the reason that I've been able to pinpoint the cause. It's likely that the window channels could be contributing to this as well. The problem is...I don't know how to solve this without applying a lubricant that will smear/streak my windows.
I've already taken clean rags and wiped both the inner and outer portions of this material to remove dirt and dust that they gather...no change in the noise. Is there a way to "condition" the material so they will soften up, without leaving a residue that will streak the window?
View 10 Replies
