Ford F-150 (2009-2014) :: 2012 - Too Quite After Exhaust Replacement?
Sep 10, 2015
I have a 2012 F150 5.0L that I bought used in 2014. Apparently the original owner had replaced the exhaust with a dual exhaust (converter to muffler to two pipes out of muffler), but didn't spend a lot of money on it (?) and it rusted out. My dealer--we have a pretty decent dealership here, and they've done my service for years--sent me to a local exhaust/muffler guy, who recommended that I go back to a single exhaust, and happened to have an OEM setup that had come off of someone else's new truck. He put it on my truck, and so far all seems fine. (small town; bad service places tend not to survive, and both the dealer and the muffler shop are institutions)
I'm an older, single woman who has horses, so my truck is primarily for hauling one or two horses and hauling hay and feed and such. I want my truck to last--my previous one was a beloved 97 F250 7.3L diesel that I had for 17 years, but, while the engine will run forever, the peripherals were starting to worry me and it needed to find a home with someone for whom getting stuck on the side of the road was an adventure, not an major inconvenience. Anyhow--so, I'm a gentle drive, my truck gets serviced regularly, and reliability is my primary concern.
The new system is quiet. Really quiet. Coming off a diesel, I actually liked the bit of growl I got from the old system, and being able to hear my engine, but I didn't have the heart to say that to the nice gentleman at the muffler shop, and it's not a big deal. My concern is that I have no way of knowing what vehicle the thing came off of, and the guy said it didn't matter that much; it did fit on my truck, and he said it came off of a brand new F150, but it had a suspicious "CHEV" chalked on it ... (FYI, there is an additional resonator after the muffler--it was a bit of a tight squeeze between the spare tire, but it did fit)
So my question--should I be worried? How quiet should my truck be?? It is my understanding that the OEM exhaust on the 5.0L has a bit of growl to it, so I kind of doubt this rig came off of a 5.0. How generic are exhaust systems? What effects might it have on my engine? I trust my service guys, so I trust their recommendation of this muffler shop, but I'd like to hear other opinions, beyond "it will be okay ..." Are there any "buts" in this situation?
View 9 Replies
Advertisement
I have a 12 F150 with the 5.0L. it has 27000 miles on the clock. Noticed twice a small puff of white smoke coming out of the exhaust and decided to check the oil level and it was a quart low. The last oil change was done at 23000 miles and used Full Synthetic Pennzoil and a K&N filter. Called the local dealership I purchased at and they told me NOT to use full synthetic and should only be using Motorcraft semi synthetic with a Motorcraft filter. I know the dealerships will only endorse and advice Motorcraft products but what does everyone else use and think. In the meantime I added a quart of oil and all is fine.
View 5 Replies
I have had an exhaust leak under the hood of my 09' F150, XLT, 4.6 3V for some time now and decided to get it checked out. I took to the local stealer and as i suspected its the manifolds. There are 4 studs on the left and one stud on the right sheared off. Ford quoted $1400 for replacing both mainfolds and extracting the broken studs. This would give me the exact same manifolds that were on the truck from the factory and started leaking at 78,000 miles.
So I decided to take the truck to a local speed shop that I have used in the past for other things. The mechanic there said to just buy a high quality set of stainless headers, stage 8 locking fasteners, and copper gaskets. He will install. I went with JBA shortys from AutoAnything.com and the mentioned hardware from Jegs.
So basically for around $100 more I get headers that probably will last the life of the truck. I am quite displeased with the exhaust issues that Ford has had and known about for over 20 years. The service manager at Ford said they replace manifolds with broken studs on a regular basis. He also said it was a wise choice to go with the headers instead of the manifolds even though they will not install them. That says a lot about the confidence of the Ford service department in their parts and vehicle designs.
Its a little sad that a 6 year old truck with only 78,000 miles....
View 14 Replies
So after remotely starting my truck on a cold morning, I walk up to the vehicle and notice a small puddle of water near the middle of the truck (not near the engine where the A/C usually drips), and I can also hear a slight ticking noise that I never heard before. I stoop down and can see water dripping from the exhaust (I think off the back of the resonator?). I snap a few pics and decide I'll take a closer look later, but curiously when I return from my drive, the leak and noise are gone.
With 76K miles on the truck, is it possible I've developed a pinhole sized perforation or leak in the factory exhaust system (or maybe there's a loose fitting) that is only present when the engine is cold, but "seals" itself up once the engine is warm and the metal has expanded? I only see the water puddle and hear the noise when remotely starting the truck on cold mornings, never on warm days or after driving around town.
View 6 Replies
I currently own a 2009 F-150 XLT, ext. cab, 4X4, 4.6l, 6R80 trans. Surprise, Surprise I have just developed an exhaust leak at the manifold collector. After some careful investigation, I separated the pipe from the manifold and the sealing surface is totally rotted away. I cleaned it up as best as I could and slathered some muffler cement inside the joint to seal the leak. It is about 80% better but will get worse again I'm sure.
I visited my local Ford dealer and talked to a friend I have working there and he said Ford has known about quality issues with manifolds for years and he was surprised that the manifolds lasted 70k miles.
I am hoping to use the truck as is through the winter and in the spring I am going to install these headers:JBA Headers - Reviews on JBA Cat4ward Exhaust Headers - Stainless, Ceramic & Chrome Finishes
This intake:K&N 63 Series AirCharger High Flow Cold Air Intake Kits Best Price & Reviews
This tuner:Bully Dog Triple Dog GT Tuner (49-State Legal) - Bully Dog GT Tuner Reviews on Gas Programs for Dodge, Chevy, Ford & Nissan Trucks
I already installed a Flowmaster American thunder catback exhaust system about a year ago...
View 2 Replies
I was checking the oil in my truck yesterday. I noticed the passenger side exhaust manifold was flaking rust. I mean flaking bad, big chunks coming off. Even the heat shield was rusted bad enough that it is barely holding on. Looks like in a couple years will need replaced. I have never seen this on my other Fords.
View 4 Replies
Looking to put dual exhaust on my 2010 F150. Which muffler. Flowmax or Magnaflow. Do not want it very load. Looking a little smooth churn like the Mustang. As you know ford is very distinctive and I want it to be heard to some degree.
View 14 Replies
I have a 2006 f150 with the 5.4 with 150k miles and I thought it was originally an exhaust leak so had that checked then thought maybe the cats went back and had that checked and after that read up on all the IWE threads and decided to replace them. Replaced them and the actuator and the problem seems worse. Now the noise is constant will accelerating. It use to be intermittent but now it's all the time unless in 4wd or coasting. What the problem could be? I know the truck is 10 years old but in great condition, everyone is surprised it's as old as it is.
View 2 Replies
Had a slight boo boo today with my truck backing out of a garage - snagged the right side (passenger side) mirror on the g-door rail and snapped the ball and socket of the mirror.
Tried to search the net for a replacement mirror and not having much luck. In locating one. I found one site but they do not carry the painted version of the mirror just the mat-plastic finish.
2009 - F150 - Lariat - Stone Green color....
View 1 Replies
I have a check engine light on which diagnosed by Autozone relates to O2 Sensor, Bank 2 Sensor 1.
I realize sensor 1 is upstream before cat converter. However, I've received varying opinions as to which side is Bank 2, driver or passenger.
2010 F150 4.6 V8, produced in 5/10
View 3 Replies
Very loud sounds like bottom end/rod bearing and is about to go out with a bang real quick!
Truck is a 2009 5.4 3V ...
Will the motor from a 2005 5.4 3V work to replace it? As I have one of those sitting in a old work truck. I know the intake etc is different but using the 09 stuff will it work and be a easy enough install or do I need a 09-10 motor?
View 7 Replies
Ok, as promised I made a clip of my 2011 Ecoboost towing my 5-6K trailer with a 3" cat back MBRP exhaust. I gained over 2 mpg with this exhaust (MBRP) and intake (aFe) while towing. So far while not towing it only seems to have given roughly a 1 mpg increase over stock. I can barely hear the exhaust at highway speeds after the truck shifts into 5th and 6th gear. The wind noise is literally louder than the exhaust at 55 mph!
[URL]....
View 14 Replies
My 2010 5.4 F-150 Lariat 2WD truck has 130,000 Miles on it and the gas mileage took a dive from 16.5 to 15.2. I'm over due to change the spark plugs. Are there any secrets or tricks I should know about before I get started changing them.
View 3 Replies
Recently, my CEL came on. I had the guys at Autozone read the code and they said it was the knock sensor on bank 2. I disconnected the battery to clear it but after 100 miles or so it came back on. Idling, my engine runs as quietly as it ever has (can't tell it's running if the windows are up) so I'm hoping that the sensor has gone bad. I can't hear any knock at any speed but the re-appearance of the light has noticeably affected the engine performance. Any link that even shows where the sensor is located? If I can find it, I can replace it.
View 1 Replies
I have a 2011 F150 FX4 Ecoboost w/ 37K. I recently had to have the master cylinder replaced along w/ all my brake pads because it was not disengaging the calipers properly, so all of my pads were prematurely worn and cracked. I was wondering, it seems like this shouldn't happen on a truck this "young".
View 1 Replies
I have lots of info these manifolds. Have gone through four including both sides twice. This last time it seems the manifold has a crusty residue on the inside. The mechanic says it may be a bad head gasket.
View 14 Replies
I have a 2011 F-150 Super Crew and have had to replace the back up camera due to a malfunction. Once the dealer replaced it under warranty I was no longer able to get all the options that the previous camera had. Since then the 2nd camera went bad and I just had it replaced again. This new camera still is missing 2 of the options the original camera had. The dealer now tells me that they must have been deleted off the software on the replacement cameras. They were unable to verify that through Ford though.
View 6 Replies
Ok so besides intercooler condensation causing misfires this is the #1 reason for misfires on this engine. Any misfires on this engine has great potential to damage the catalyst and should not be taken lightly. As many know by now boosted engines are hard on the plugs be it iridium platinum whatever and you may find the need for new plugs by 50k miles. More so now as many are coming in with carbon tracking as this one had. In this video I walk you through the procedure to change out plugs on these engines with the revised plugs, gap specs and TSB that have all come out recently.
Ford F150 3.5L V6 Ecoboost Misfires: Spark Plug Replacement - YouTube...
View 14 Replies
Any way to replace or re finish the chrome clad wheels?
I have a 2012 xlt with the chrome package. The chrome on the rims started to bubble.
So I am trying to come up with something to make the truck look good again.
View 12 Replies
The heater control knob cracked on my 2011 Ford F150. Where I can get a replacement and how to take that off?
View 2 Replies
5.0 coyote exhaust leak .. Since the cold weather has arrived i have noticed a new noise. During cold start engine warm up I hear a nice little tick-tick-tick which sounds to me like an exhaust leak. Is this a common problem? I have just over 58,000 miles would this be covered under powertrain or do they have some nice exclusions for exhaust?
View 9 Replies
