My prius 2008 I have been using for past 8 months or so was running fine with no issues until recently its audio system started malfunctioning. The power/disc/am/scan or volume tab won't function but it can be operated through the button on steering wheel .
After restarting car two times it started working.
I just bought an 2008 Prius and I cannot for the life of me get the AUX function to work on my stereo. I have my iPhone plugged into the jack inside the center counsel, hit the DISC/AUX key and nothing. The cable between the iphone and jack is good, because I tried it on other devices and it works great. When I have a disc inserted into the stereo the DISC/AUX button works when switching from AM/FM radio to Disc and the cd plays. But when I have the cd removed from the stereo and hitting the DISC/AUX switch it does nothing. What am I doing wrong??? Or is the stereo broken????
View 4 RepliesThe MFD works and I can change modes and stations, but no volume with the audio. Nothing for bluetooth handsfree, am/fm/aux/cd, etc.
View 7 RepliesI have a 2010 package IV not 4 because it is a 2010 and only 2010 used uppercase roman numerals for model designation, with jbl non nav stereo. I have been having issues with the volume control not working so was looking into upgrading it to a a jbl with nav since I can get a good deal on the stereo and nav antenna. My question is will the existing wire harness support this and will a unit from a 2012-2013 fit a 2010?
View 6 RepliesI have a 2011 prius with just a regular stereo and no amplifier. the sound in the speakers go off when putting the volume up, however if I umplug the front speaker connector to the stereo the sound will work fine on the back speaker but once I plug that connector back the sound goes off. the sound to the speakers work fine with the Bluetooth.
View 17 RepliesAn intermittent problem has showed up over the last few weeks that is quite distressing when it occurs.
When starting the car, the radio comes on a full volume. Turning volume control knob does not work, but only turning off the radio or turning off the car. [This only occurs if the radio was left on when the car was shut off previously.]
Also, the problem is noticeable if the radio is off and the buttons on the navigation system are pushed resulting in a high-pitched "beep." Then I turn the car off, then on again, and everything is back to normal.
This happens about once or twice every couple of weeks.
I get frustrated when I start my car and the radio volume is really loud from my previous driving experience. When I shutdown my 2012 prius 3 with the radio volume turned up loud it seems to remember the volume level. I do not have volume control until 4 seconds after I start it.
View 4 RepliesJust purchased a Prius III a week ago, like it so far. But one thing I have not figured out is how to adjust the rear speakers volume. My Prius has a JBL system, the two front speaks are quite strong, but the rear ones are not. On my other car, Camry, the volume can be easily adjusted to make either the front or rear speakers loud / light / balanced. How to do this in Prius? I believe it must be capable of doing such a basic thing, right?
View 5 RepliesWhen I have the navigation routing somewhere, I can't figure out how to adjust the volume of the voice. How can I do this?
View 9 RepliesEven though I have my 2013 Prius for 2 months, I just started trying the voice command system. I find that the volume of the voice prompts are very very low, and can't figure out how to raise that volume. The volume controls on the steering wheel have no effect, the radio volume control knob doesn't do anything, and there's no icon on the audio/navigator screen to make the voice prompts any louder (that I can see or find). It's probably something real easy and I'm just missing it, right?
View 1 RepliesI recently purchased a 2013 prius two. My building's parking garage is very long (full city block) and narrow, and I have to back out of it each time I leave. While I understand the benefits of the beeping, it is SO LOUD! Is there any way to lower the volume? I know I can take it to the dealer to get it switched to one beep, but all I really want to do is make it quieter, not go away. Alternatively, where the speaker the sound comes out of is? Maybe I can muffle it with tape or something.
View 4 RepliesI just purchased a 2010 Prius II. I have an I Phone 5. When I connect the phone thru Blue Tooth and listen to music app, I can only adjust the volume with the phone. I want to be able to adjust the volume with the car stereo volume knob.
View 3 RepliesStrange occurrence the other day that I have not been able to remedy. The volume/power button that can pop in & out on the dashboard hadn't been used of late but when I went to depress it, the button popped out. It is spring loaded and the knob itself has an end that is cut into quarters - persumably to fit into the female end within the JBL stereo unit itself. But can't figure out how to get it to stay in place as it continues to pop back out. Volume & power functions still work but button/knob won't stay in.
View 1 RepliesDriving what was my wife's 2008 Prius, and for the most part the sound is adequate but I have a bass rattle in the doors and I'm wondering what's the best way to resolve it.
My source is my iPhone 6 via a Bluetooth add-on, and for the most part it is fine if i leave the iPhone volume level at Max minus 2-3 bars. But if the song is bass heavy and I have the JBL volume high, there is quite a bit of rattling vibration on the door (rattling panels, etc.), on all the doors.
Q: Is this something that can be resolved by adding a sub and rolling off the bass for the JBL speakers? Or does resolving it require more a sound deadening at the doors?
I figured out how to get the text message function to work on my head unit. It was a setting on my iPhone, under Bluetooth it was the "show notifications". Then all of a sudden bam any texts I get while in the car pop up and the HU will read them aloud, also there are a bunch of quick responses.
View 16 RepliesMy MFD now only shows the Toyota Logo, whatever I do. Also, I cannot play music. The trick with pressing (hold) INFO and headlights three times does not bring up a diagnostic screen. My theory is that the MFD is waiting for some signal over the network before showing the usual screen (and it never gets that signal). Some years ago, I had a third party fit a new audio tuner and player (non-Toyota), and that worked more or less fine for years.
They had to leave the old faulty Toyota audio in the circuit to make it all work, and they said to leave the graphic equaliser on even settings, and then forget it. The old Toyota audio CD changer had failed, but the rest was OK. My 'guess' is that they had to leave the old audio device connected because it terminates the AVC-LAN with a 60 ohm resistor. Maybe that connection came off, and now the LAN signals are not good, and the MFD is locked up 'always waiting' for the signal from an ECU.
When I got my Prius, the volume knob didn't work, and I thought I could live with it. Steering wheel controls work fine except when I'm turning the wheel, then I have to chase the buttons. I really want the volume knob to function properly.
The post that inserts into the head unit volume receiving column is sheared off and stuck in there. I tried super-gluing it back together, but that didn't give me the slight bumpy sensation when I turned it. I thought it would at least depress, but not when it was superglued together. It won't pop in and out when I press on it when it was glued.
I have a 2011 Prius Four with JBL/navi package. When I go to turn the volume knob up or down the navi screen pops open as if I were going to eject or insert a cd. Only sometimes will it close back up when I press the eject/close button otherwise I have to twist the volume knob back and fourth until it randomly closes. THEN, when I set FM/AM station presets, power off the car, power car back on, the screen shows "loading" and everything resets except for the Bluetooth phone settings. Is there any firmware update I need to install via usb?
View 1 RepliesI discovered shortly after I bought my (used) 2012 C 4 that I couldn't turn off the radio. The volume knob didn't push in to turn off. Not a big deal, but I mentioned it to the dealer and they ordered me a new replacement knob. In the meantime, I just swapped the tuning knob over to the volume side and it's all fine. But I also discovered that the tuning knob side does push in – even with the broken knob – and not only that, it beeps when you push it. What is it supposed to be doing other than tune stations/change tracks? The Entune radio has a separate function for tone, balance, fader, etc., so it isn't doing that with the knob.
View 2 RepliesCan Display Audio's phone interface accept pauses or waits (P or W) in the phone number? My phone uses them for voicemail passwords, eg dial the number, pause a few seconds, and then dial the password. So far it does not work at all through the bluetooth interface when initiated through voice command ("call xxx xxx xxxx pp yyyy#") or through the car's screen. I tried to directly store a similar number into the Display Audio "stored" numbers but could not find an option for the P pause.
View 6 RepliesI Learned on a Toyota Avalon web page that you can force your audio system to reboot itself by pressing the power button for three seconds. On the Avalon, it only works on the "Limited" levels. I tried it tonight on my Prius Four and it worked. Great to use when your audio gets "confused" and you just want to clear it and start over.
View 1 Replies