So I installed the DG springs today, and it should've been a simple install. Well once all was said and done I took it for a test drive. Every time I go over a bump I hear a loud clunking noise, like somethings loose. What it could be? I'm pretty sure I tightened everything.
View 10 RepliesIs it necessary to get new shocks/coilovers when installing lowering springs? (and other concerns)
View 12 RepliesFew weeks ago, I got the Tein spring installed on my camry. Drop 1.5/1.6 front/rear.
Problem is now I sometimes hear this clunking sound from the rear. It doesn't happen very frequently, just every once in a while when i drive through a small&sudden bump.
Only from the rear, nothing from front of the car.
Another thing is that when i reverse & turn (ex. getting out of garage), it makes one or two cracking noise from the front, small clunking sound from the rear.
I'm suspecting the strut may be bad. The mechanic guy said that my rear struts are bad (when he was installing the springs).
Am I in need to get new struts ?
I put HR lowering springs and I'm getting a bad squeak when the car goes over a speed bump . It's coming from the rubber on the end of the front springs ? Do they make a poly urethane upper mount?
View 4 RepliesI am experiencing a bad clunking noise when going over bumps. Its comming from the passenger rear and I am assuming the springs collapsed. How can i tell for sure? The car is sitting a little lower on the corner. Is it bad to drive the car with the spring in this condition?
View 8 RepliesLooking to get a set of VWracing springs but wondering if there is a way to pull the front struts without having to pull the axles out?
View 24 RepliesAfter having lowering springs installed, I've been noticing a clunk noise in the rear suspension when driving over dips in the road (eg. getting out of the parking lot onto the main road). It feels like having your wheels lifted in mid-air and being dropped onto the road.
View 14 RepliesI am installing VWR Springs to replace worn stock components on my mk6 R. It appears that the previous owner slammed the car, and removed the "nipple" that holds the rear spring in place from the top. Both upper and lower spring isolators were present.
I am trying to find a name or part number for this unknown "nipple". I tried some combinations, such as "rear spring cap" and "rear spring centering guide". It looks like it would screw into the body, right above the springs themselves.
I have a 2012 corolla le and I'm looking into getting TRD lowering springs as I don't want to go too low and they work with the stock strut, however; I read that they work best with the XRS' shock and strut (might be just the strut but I'm not sure), my question is what are the XRS' struts called and where would I find them, also from what year would the XRS' struts fit on my le?
View 3 RepliesThis is my 2011 Corolla S with Subaru Brz wheels. I got the entire set on October. It just took from a brand new Brz with Michelin Primacy HP tires. It looks on my corolla. Now I want put the Ei Bach Springs on my car, where is the good place to go?
View 2 RepliesI want to lower the car with RSR DOWN SPRINGS but I have some people telling me that I will destroy my shocks in time and other people saying its fine.
View 14 RepliesWe have spread it as much as we can and it's come up about 2 inches - then stops,
View 8 RepliesIf I get in my car to hard or even when I'm in the car and rock back and forth while standing still it sounds like the springs squeak, kind of like a spring bed when getting it on. I don't hear it when I'm driving though.
View 8 RepliesSearched but all I see about "scraping" is from too low or tires scraping but this is a different issue, well i think it is, so my bro has golf 2.5 2 dr, he installed his DG Springs today and it makes this scraping noise, it comes and goes, it makes the same noise even if in straight pavement or not bouncing...
Here is a video of it making that noise, it starts at 0:50 secs : [URL] .....
My R's only got 5,400 miles on it and I just lowered it Saturday on H&R Springs and when I turn my steering wheel like 3/4 either way it makes like a clunk noise at lower speeds only....any other part besides strut top mounts and bearings? It sounds like its coming from the right front.
View 9 RepliesI had the neuspeed springs installed last weekend and now the Front right side make a loud clicking noise every one turn on the steering wheel. it sounds like the springs it self. What could it be?
View 9 RepliesI'm getting a clunking noise when i let off the gas immediately when the motor is under kind of a load, for example I'll give it a decent amount of throttle at around 2k-3k lets say and then let off fast and it'll make a CLUNK sound, kinda sounds like metal.almost kind of an axle sound...a lot of movement from the motor also. I am assuming it's motor mounts? I just did a stg2 bfi dogbone little while ago.
View 7 RepliesSo I recently installed a GTI sway bar on my 2010 TDi and was getting a clunking noise. I assumed that it would be the subframe making noise since I've read a lot about that but the sway bar is actually rubbing on the front portion of subframe (the part that bolts to the frame directly above the A-arm). It's hardly touching it but its enough to wear into the bar.
View 4 RepliesI just installed my new coilovers and I have a weird clunking noise coming from the front passenger side. I havent had to time take the wheel off yet, what the problem is.
View 4 RepliesAfter doing reading I think my issue might be suspension related. Whenever I engage the clutch at a normal rate I get a rubbing/clunking noise coming from the driver side. I can feel it thru the gas pedal and it sounds like a card in a bicycles spokes. If I engage the clutch extremely lightly I don't get the noise at all. This only happened AFTER I had my H&R Sport Springs installed. Could it be a strut mount? Engine Mount? The car only has 4500 miles on it. I'm extremely confused.
View 4 RepliesCar is at the dealership now and they said that the sensor is being stretched out from being too low. I'm only dropped on a h&r sport cup kit, nothing drastic.
View 24 Replies