Golf/GTI VI :: Stock Suspension Squeak While Hitting Speed Bump?
Feb 22, 2011
My car has developed a strange squeak from the front suspension when going over large bumps or speed bumps. Most of the time it only happens when i hit a speed bump with both tires hitting at the same time. It is a slow squeak not very high pitched but shouldn't be happening on a car with stock suspension components and less than 12,000 miles.
Why my car would be doing this, under normal driving conditions i don't hear any sounds. Its just when i go over speed bumps and large bumps on the road. It is also only from the front suspension.
View 8 Replies
Advertisement
Everytime I hit the slightest bump I here knocking, tapping or clunking coming from my front suspension what could it be.
View 6 Replies
My front suspension squeaks very loudly when going over even the slightest of bumps. I've looked at similar threads and have noticed some people replace the entire control arm, some just replace control arm bushings, others change the strut mounts/bearings.
Am I better off replacing all 3 components (control arms, bushings, and strut mounts/bearings) or just doing CA bushings and/or strut mounts? Do control arms normally need to be replaced? Car has 90K miles, and is daily driven year around during the cold Minnesota winter. My knowledge of suspension components is limited.
View 13 Replies
2012 SE with 4 cylinder 35K miles. When the front wheels go over a speed bump at a couple of miles per hour I get a noise which sounds like something hitting the floor board of the car. It is a loud single thud. Much deeper and louder than a loose seat would make.
View 7 Replies
So I have 1976 f100. For the last few months I have been dealing with the famous death wobble of solid axle trucks. It seems to randomly appear at speeds over 45mph or after hitting a speed bump or cattle guard. I have tried several things like replace all the bushings in the front. Ive looked for any bars with play and fixed them right away. And I even replaced the ball joints thinking it would work. I actually let another mechanic to solve the problem, I was fine for about 3 days. I am running out of parts to check and its hard to drive it down the road.
View 1 Replies
I hit a bump while pressing the brakes for a stop sign (going down hill), and I hear/feel this grinding noise through the pedal right when I hit the bump. I assume it might be the surface after the bump as it happened in the rain and it could be slippery causing the brakes to lock or something. I don't know, I might just be paranoid.
View 2 Replies
I have about 48k miles on my 2010. Colder weather seems to bring out lots of noises. I can hear a suspension crick noise when I hit a bump and slow speed up the driveway apron. Got me thinking about shocks and struts. How long do they last?
View 7 Replies
my (mostly) stock suspension is squeaking at 45k and overall is a bit louder than it was. I do have VWR F&R sways installed as well as the tyrolsport deadset subframe bolts, but everything else is stock. I was considering the VWR springs but have held off so far...
Objective: maintain ride comfort while getting better performance than stock. Ride comfort is key as I travel on quite a few harsh roads out here in the Northeast. I was fairly happy with stock as is was lower/stiffer than the stock GTI suspension that I was accustomed to. For the most part, I actually like the GTI's comfier ride better in commuting/road trip scenarios (which is the bulk of my driving). Bottom line, I want something durable, comfortable, and better handling than stock.
At 45k should I replace the struts as well?Could the squeaking be from something other than strut mounts? Are there coil-overs that would achieve my objective?
View 14 Replies
Ever since i bought my .:R (3weeks ago) there has been this 'squeak' or 'chirp' sound whenever i hit a bump or rough road. Car only has 22k miles on it so this is way too early for any noises to be coming up. I've spoken to a few friends and they think it might be the bushings or my suspension was installed incorrectly. What it may be?
View 20 Replies
I just replace my struts, tie rod assemblies along with the wheel bearings on my 2003 MKIV Golf GL. I noticed when turning at low speeds, the is a squeaking noise (rubber against metal). It sounds as if its coming from the shock tower but can't tell. The installation was relatively straight forward.
View 3 Replies
So my strut mounts are shot and I wanted to add adjustable rear control arms to eliminate tire wear. So thinking of going with Bilstein HD's with the stock springs. Oh and BTW want to keep stock ride height since it is my daily. The only option I would consider for springs would be the euro version of the stock springs.
View 4 Replies
I'm a new Mk4 R32 owner in the Portland area and my driver's front suspension developed a nasty squeak on the long drive home after buying the car. When you hit a pothole or any sort of bump it makes a nasty "clink" sound under compression/rebound. It's only on the driver's side front, and it seems to be a bushing/bearing or upper mount in the car when I got it up on Matrix Integrated's lift.
Also - the driver's front spring is squeaking since the powder coating flaked off after all the miles.
Thinking of buying a cheap set of coil overs to remedy this and refresh some of the more worn suspension items. Car drives just fine too.
View 6 Replies
I just got a new Golf TDI. I have about 500 miles on it so far. I recently went over a speed bump in the road and the car made an awful clunk sound sort of like the strut reached the end of its length reach. The car continued to make this klunk sound when I'd go over smaller bumps just not as loud. What this could be and how to remedy it?
View 5 Replies
In the last two weeks I keep getting a squeaki-ish ratter from the back whenever I hit even the slightest bump.
Dealer will look into it next week? I think it has to do with the rear seats.
View 14 Replies
I have steed77's old BMP R32 which he heavily modified.
My problem I just noticed today in FL, 61 degrees out, is when I go over speed bumps my fronts make the very wet shock compression sound of KW v3's and then i hit my rears, going about 5mph and I hear a squeak sound. Now this sound is a problem sound, it sounds like somethings getting torqued or a rubber strut is moving or something, I can't really describe it. I hope it's not the shock gone bad!
View 7 Replies
Driving home the other day I crossed some railroad tracks. They weren't too bad, but bumpy. I wasn't going too fast over them, had slowed a bit with traffic. As I cleared the tracks and hit the gas, nothing happened. The car hadn't stalled and I didn't hear any noises, but for about a second as I pressed the gas, it didn't go in gear.
I think the engine revved, like it was in neutral. I looked down and the traction control light was blinking, but no clicking noises were heard. After a second it started acting normal again, and I have gone over those tracks again the next day to try to replicate and it didn't happen again. Is this a known issue, traction control kicks in when a bump is hit...but no clicking noise like i usually get on ice/snow? Or should I have it looked at?
View 2 Replies
My 2010 Camry was great the first two winters. Now after the windshield was replaced this summer, the dash rattles against the windshield when it is below 45 degrees and hitting a bump. The same rattle is heard from one A pillar too. Is this related to the windshield replacement or the age of the Camry? It would to determine if I should get another windshield replacement or wedge foam for rattle abatement.
View 1 Replies
I have a 70,000 mile touring SE which at low speeds( less than 20) has a rattling/clunking noise when hitting any small bump. Can not hear anything at higher speeds. Steers well noise could be coming from both sides. They did replace my transmission at 40,000 miles. Car does not bounce when pushing on it like a strut is bad.
View 5 Replies
I got my 6k HIDS installed yesterday but for some reason they start flickering every time I hit a bump but they stop flickering once the car is stable or just idling on a light. I think the lights flicker because the ballasts are screwed to one of the existing screws on the car and they kind of dangle and nothing else makes it stable which makes my lights flicker. Question is, where did everyone install their ballast or the best place to put them so they wont vibrate?
View 7 Replies
Toyota Tundra 2001 v8 4wd. sequence of events as follows . Changed rack and pinion ,tire rods, had aligned no problem. 135000 miles, on it so it was time to change ball joints upper and lower, and struts on front, and brake pads, aligned, now when I hit a bump or hollow the truck feels like its out of control like it goes side to side too much, on level road no problem, changed shocks on rear, but no difference, new bushings on rack and pinion same thing, could it be control arm bushings? or shocks on front are faulty, how could I check? all parts bought at a well known auto parts store, its driving me crazy, last thing tires scream a little going around corners, like you hear if someone is going too fast, but I am not.
View 2 Replies
After installing BC Racing Coilover + Swift Spring which is lower than stock.. I've lowered the front another 1/2 inch.. Now going over moderate bump the tires are hitting the top of fender liner. I have tried to use heat gun and pushed the fender a little more up without success. If it involves removing the top fender liner..
View 10 Replies
