Currently my gas & temp gauges do not work, so I assume the cluster is shot or needs fixed etc. my question is can I simply replace it with a used one from eBay, or do I need to send this one back to be programmed? I was reading about the immobilizer which I assume the 2003 is subject to as well?
View 1 RepliesI just picked up an '03 Golf and decided to put in the euro switch I had from my old Jetta. When I turn the headlights on (either parking or full) the instrument cluster blue back lighting and the red interior LEDs work only sometimes. When they work, they all work, but probably about 9 out of 10 times, they just won't come on at all, so I have to sit there turning the switch on and off repeatedly until they do come on. What could be causing this? It's definitely not a fuse since they do come on eventually, so my first thought was maybe a relay, but which one? What else could be going on?
View 5 RepliesI am going to remove my Instrument Cluster for an illumination LED changing, to convert them to the white colour. I found out that Immobiliser is located on Instrument Cluster, is there anything I have to be careful?
It's 1999 Bora. I think Immo 2 on it.
I found one Thread that someone had the problem with Immobiliser after cluster removal (it was also for LED job), a car was not starting, he suffered some time tried lots of things, but then everything went OK, even though he wasn't sure what was wrong.
So, do you think there is a high potential risk to take it out? Do you think I have to cut battery connection beforehand?
I am having a slight issue with my cluster. When I turn the key on or start the car, the speedo needle goes crazy for about a minute then stops above 0mph (points at 5mph when im not moving). While that's happening, the other needles don't work until the speedo normalizes. It also does this when i turn the car off. What this could be? I heard about the VSS can cause speedo issues but what about the rest? I also heard the mk4's can have cluster failures. it's a 99' mk4 vr6 jetta 5spd.
View 3 RepliesMy instrument cluster panel went out. I bought one on ebay and I would like to replace it myself. Is there a step by step video or a diagram that will show me how to take the dashboard off?
View 1 RepliesWe just replaced instrument cluster and turned the key to on position for 10 minutes. We waited for the anti-theft light to quit flashing and the car runs great but the anti-theft light will not go off. How can I fix this problem?
View 4 RepliesI have a 1996 ford ranger 2.3L automatic. I need to replace the instrument cluster. I can remove all the plugs from the rear of the cluster except 1 black wire I assume is the speedo cable. It runs from the rear of the cluster down underneath the dashboard. How to remove this cable so I can replace the entire cluster?
View 4 RepliesI found one thread in FTE regarding replacing instrument cluster bulbs but the solution was to contact Circuit Board Medics. I have one dark area on the right side of the tach and another dark area on the left side of the speedo. Probably the same bulb that's out. Also, can attempt to replace the bulbs (assuming its a bulb and not a fiber optic of some sort) in the steering wheel volume and fan controls?
View 3 RepliesThe speedometer, tachometer, fuel gauge, battery meter, temp gauge and idiot lights went out. The car works fine. Dash is just dead. I did a quick look at the fuses in the glove box but it doesn't have the little card to tell fuse locations. So, I can't narrow it down but I don't see any blown fuses.
View 4 RepliesWith DRLs enabled and a Euro switch in Auto, I get HIDs, city lights and side markers during the day - no DRL indicator on instrument cluster.. With switch in Off, I get only HIDs, but with DRL indicator lit. In Auto I expected only HIDs as DRL and DRL indicator lit. No city lights or sides.
View 2 RepliesJust wondering how to remove instrument cluster?
View 8 RepliesI had my radiator replaced last month and the day after I got it back from the shop the instrument cluster died (sort of). It functions intermittently but is off a majority of the time. I can tease it on by pressing the on the front of the cluster in the lower left corner but it goes out again when I let off the pressure. I called the shop and they told me there was no way that any work they had done replacing the radiator could cause the cluster to go out, but I am not so sure.
Since then I have been driving not aware of my speed (I actually have an app that gives me my speed but is a sad workaround) or knowing how much fuel I have in the car at any given moment. And, as you who know what type of money pit I am driving, all of the notifications to warn me when something is wrong. which it usually is, are located in the cluster as well. As soon as I have a working cluster I will sell it.
I am looking into buying a used R32 and as I drove it, a warning came up on the instrument cluster that the door was ajar and it was german text. Is this something that all R32s have? Or is it possible to be changed?
I tried searching but couldn't figure out the proper search terms. I'm not sure I'd even want to change it as the german is pretty cool. Just wondering if this was something that was changed by someone at some point or something screwy with the car's computer.
Also, I know the MKV says what number your car is /5000 on the steering wheel. The MK4 doesn't show that but is that number on the car somewhere?
Recently my 2003 Hyundai Accent has lost illumination on all gauges. Oddly the clusters light up when I arm and disarm the alarm system. The fuses look good and this all began when I had to fix the stereo. At this point I am lost. I have a few ideas in mind that could be causing this behavior. The computer may be going out, a wire got pinched and cut the connection, or I just plainly shorted out something. I have a video showing the problem I am having and I'll have a link to my youtube video.
My Instrument Cluster won't Illuminate - YouTube ....
I have a failing 2003 Chevy Suburban instrument cluster and wonder if I can replace it myself. All I have to do is remove it and re-install it when they send it back. 4 bolts and one plug. No reprogramming. What could be easier? Is it really something I can/should do? -
View 3 RepliesI just replaced all 5 of my instrument cluster bulbs in my 1998 f150. Everything looks nice and bright now that everything is replaced but around the top of the speedometer the light is dim. Is this normal for this instrument cluster or could there be a bad bulb or a light blockage? It's frustrating to go through effort to get to the cluster and find out after it's put back together that there's a bad bulb or something.
View 2 RepliesMy instrument cluster is virtually nonreadable now when the outside temperature gets about 80 degrees. I assume the only way to correct this is to replace the whole cluster.
View 24 RepliesI was driving in the sun the other day and realized I can't read my orange information center section of the instrument cluster during the bright day.
Is this normal? It seems dull.
I saw some bulbs for the instrument cluster here:
Would these be a replacement that would fix the issue or is the orange section not using a bulb at all?
[URL]
I have a 2012 F350 XLT that came out of Canada. So of course the speedometer is in KM. (Large numbers are km and smaller numbers are mph). I am trying to find out if I can simply change out my cluster with a mph cluster???
View 4 RepliesI've got a 03 explorer with a 4.0 and it seems the fuse keeps blowing out, I have to keep replacing the fuse every time for the gadgets on the instrument cluster. Could there be short somewhere?
View 7 RepliesThe brake light in my instrument cluster on my 1997 F150 won't come on. I have put in 2 new bulbs.
View 7 Replies