Golf IV / Jetta IV :: Power Windows And Door Locks Not Working
Jun 4, 2015
I have a 2003 jetta GLI (vr6 6 speed) that i received from a friend because of some body damage to the doors mainly. so i replaced the doors with some from a 2001 jetta glx, but the power windows don't work with the switches inside the car. However, when I put the key in the door and turn it, all of the windows will go up and down...(So the motors are good and they are getting power) the door locks, gas cap lid, trunk, sunroof all work and the interior lights work as well.
So i researched it and everyone said fuse #14 or ccm... so i replaced the fuse.... multiple times now just to make sure... After that didn't work, i bought a new ccm with the same part #. that didn't work at all... still same problems... I was wondering if maybe the new doors are or aren't CAN-BUS? if that even matters?
View 4 Replies
Advertisement
Troubleshooting a problem with friend's 2000 F250. His power windows aren't working and are causing problems with his door locks and interior lights. When he tries to use his drivers side power window, his power door locks quit working. If he puts the switch to raise, the interior lights flash. From what I've read, it sounds like the GEM to me, we've inspected the wiring and it all looks good. I pulled it out today and it looks good inside, no sign of water leaks on it. If it is the gem, how much do they cost and do they require programming?
View 5 Replies
I have a 2000 Taurus and recently the power windows and power locks stopped working. They won't work from any door switch but when I use the key fob to unlock or lock the car the locks will work. However, the windows won't work from any door switch. I didn't see a fuse marked for the windows or locks.
View 3 Replies
I've searched the inter tubes, trying to find out if there is a fuse or relay or even circuit breaker that needs replacing. From all I've checked, I can't find a fuse, relay or circuit breaker labeled to control window and door locks.all 4 windows don't work (with exception to front passenger window occasionally goes down but not up.)finally figured i should have come to this fine forum first! (especially after hearing 'car talk' today)some other pages with similar questions had answers referring to fuse #12 or relay F (mine aren't identified that way). I'm heading out to get a test light -- just so i can see if i can test anything...
View 13 Replies
I've got a 2002 jetta. new ecu, new cluster, new keys (new to me from a 2010 beetle) all installed but my windows, door illumination, locks and electric mirrors dont work. Windows will go up and down with key in door, and locks work that way as well. if i put my old cluster back, everything works fine.
View 3 Replies
We've got a 2006 Civic EX Coupe, and the power windows and power door locks have both stopped working. If I can remember correctly, they kind of faded out over the course of a few weeks, working intermittently then not working at all.
All window and door lock fuses (interior and under the hood) are still good.
What this could be? Is it something DIY fixable? I've removed door panels for random stuff, but haven't really done much with power window electronics.
View 2 Replies
1997 Ford Expedition 4x4
When I push the switch for the drivers window I can hear the relay in the fuse block make a click but window doesn't move. If I push the switch for any other window (on the drivers door or any other door) no click at the relay and no window movement. I've swapped the relay with other relays in the fuse block but nothing changed.
I've tested the driver side window motor by running 12 volts directly and the motor works fine. When I press the PDL switch I hear a buzzing sound coming from the passenger floor area behind the glove box but the locks do not go up or down. I started the truck and when I put it in gear I can hear the PW relay in the fuse block clicking repeatedly. Put the truck in Park & the clicking stops.
I was told (on another forum) that the problem is most likely my GEM module. Bought a used 1 on eBay and installed it today but nothing changed.
View 7 Replies
2006 F150 5.4 2WD extended cab tow package 24k miles
My power windows have stopped working from all locations. I checked and the fuses are good. I can no longer use the exterior keypad to unlock the truck, yet my remote keyring switch will electronically open both driver and passenger doors. Neither driver's nor passenger's interior door switches work.
View 7 Replies
I picked up a 2004 Jetta 1.8T and it's had a lot of electrical issues, it had some water damage from a plugged cowl drain and a I've found a bunch of stuff just unplugged. I had a shop fix some missing grounds to get it running and they went through the dash and found all the air control plugs had become unhooked somehow, so they got the air conditioning working. Now i'm working on getting the locks and the horn to work. I've checked the fuses, they're not blown. I'm not sure about the relays under the dash, but I can hear a clicking from the comfort control module when I hit the key fod. The buttons on all the doors are not working. the horn will sound if the alarm is set off but doesn't work when the button is pushed on the steering wheel, nor when the key fob is struck. The windows all work, both from the key turn and the switches in the door. I'm totally lost on what to do here.
View 3 Replies
I also have a 2000 boneville and over the winter i discovered that those same three windows/locks/courtesy lamps doesn't work , I have went through all the fuses which are fine , I will call the dealership and check on the BCM. I also have the wet floor problem. But no sun roof, I read that it may be the connector under the pass seat, I see a connector above the carpet, could that be it or is it located under the carpet...
View 8 Replies
Lately I've been having issues with my windows, door locks and power mirrors not working. Here are the symptoms;
What works;
Driver window Sunroof Key fob unlock/lock (Also all of the doors unlock when I open the door)
What does NOT work;
All passenger windows (they were working intermittently before but now none of them work) Door locks from any panel (Sometimes I can unlock the doors but can never lock them) Side view mirror controls
Seems like it could be a faulty ecu. Plan on removing the door this weekend to inspect everything.
View 3 Replies
2003 f-150 Supercrew 4x4 ... I have no power to my windows door locks, power seat, mirrors a/c, anything is the a module that controls all of that stuff? Where is it?
View 2 Replies
White 1997 Explorer XLT 4 door 4x4 4.0 sohc 220,000 miles. The power windows and locks don't work. I've tried all of them in the whole car and nothing. Replaced all fuses at the inside panel and replaced all fuses and relays under the hood. Replaced master control switch on the drivers side and still nothing.
View 1 Replies
I have a 2004 F250 Super duty that had a battery die (I left the keys in the ignition switched on overnight) and after jumping the battery off the vehicle started up but now I have no power door lock or window functions. Any reason a dead battery issue might affect the power locks and windows?
View 10 Replies
I have an electrical issue on my 2007 F150.
The drivers door electrical switches (windows/locks/mirrors) have all stopped working. The locks on the other doors work but not the windows.
I have replaced all fuses with no luck. I'm thinking it's either a ground wire or the accessory delay relay.
View 1 Replies
While raising both front doors windows, both windows stopped moving. Checked power locks and they didn't work either. Manual said to reset circuit breaker for this problem but where it's located and the manual doesn't specify either. Just need to know where the circuit breaker for the power windows and locks is located.
View 1 Replies
All at once my power locks and windows on all doors and the power mirrors quit working. The Driver Info center also says "Unknown Driver" when I start the car. After that happened the check engine ligth came on and when I went to get that checked there was no power to the ODB port (not sure if it is related or separate). Also, the brake, ABS, and traction control lights are on...they have been so I'm sure that is a separate issue.
View 1 Replies
We just replaced an injector in my truck. Everything was fine, ran great, etc.
On the freeway home, the dash, windows, locks, radio all quit working. at first they'd stop and come back, stop and come back, etc. then finally they stopped. As I was getting off the nearest exit, the truck started dying on me. Once I got pulled over out of the way, it acted like the battery was completely dead.
After a few minutes of scratching my head and staring under the hood, I happened to look at the passenger side batter, and the crossover cable from the drivers side was broken off right at the terminal!! We must have broke it off while doing the injector. as I look closer at it, it had been broken before. Some idiot before me had actually taken a broken crimp style terminal, shoved it and crimped it into a new one and called it good.
I was able to redneck it back together so i could finish the last couple miles home. I fixed it properly with a new crimp terminal, heat shrink, etc. Why did the engine die with the crossover connection broken? was it because the series was not complete, and all the electronics were running off the battery(s) and not the alternator? I'm really confused. I've heard of people only running one battery before.
View 9 Replies
Just picked up the truck 1995 Ranger XLT. 3L...5spd...4x4...no power windows or door locks. The key buzzer only buzzes for a few seconds, if you move the ignition it buzzes for a few seconds each time its moved. The wipers only work when the buzzer is dinging. Also..the wipers when turned off stay in the up position. I replaced the ignition key mechanism and the on off wiper relay. What am i missing in this weird scenario??
View 1 Replies
Preliminary information: the vehicle is a 2003 jetta (gli), My drivers door ajar switch is broken and the ccm recognizes it as closed at all times (open circuit), also I was hit in the rear at about 40mph by an f-250 a week after I bought the car and I repaired the damage myself (I am not a body tech). I replaced all electrical components in the trunk as they were all destroyed as well as the trunk lid which has never quite closed the same.
.Key Fob serves no function, (replaced the battery as troubleshooting.)
.If I lock the doors VIA drivers door, passenger door or by key in door, the doors will lock and then immediately unlock.
.It seems to think a door is open even though they are all closed and the overhead lights don't come on like they would if a door was open.
.The door ajar light was on when it first started and the light burnt out after less than an hour in (coincidence? or short? I don't know what circuit to start on).
View 1 Replies
Vehicle: 2002 f250 xlt 7.3 powerstroke reg. Cab
Issue: door ajar light stays on, power locks on driver and passenger door don't work, radio stays on after truck is off an door is opened.
Events leading up to issue: went to temporarily hook up a wolo dixie horn to see if it worked. Wanted to do it fast so I took + cable, tied one end to the battery terminal and then connected other end to dixie horn relay. I then grounded both negative wires to the truck. One ground on the frame the other I temporarily wrapped around a one of factory ground mounts under the dash. Immediately after doing this the problems stated above started.
How can I fix this. I need to fix this by tomorrow. I have a guy from Craigslist coming to look at the truck. Now the 4x4 issue.
Truck has zf6 manual and the electric 4wd select ****. Just thought I'd list this if it was needed to be known for solutions.
4x4 high light stays on in while 2wd all the time. 4 low will stay on after switching back to 4 high and 2wd but it goes out if I ether stop the truck shut it off then restart it. or back up and slam on the brakes. Also when in 4 high the front driveshaft won't spin. However It will spin when in 4 low.
Another random issue I'd thought I'd just list while I'm writing this.... Cruise control does not work. And when I press the "on" button and the "coast" button at the same time the horn honks.
View 3 Replies
