Golf V R32 :: Suspension Noise During Slow Speed Turning
May 31, 2008
Noticed the front suspension makes some "flexing" noises when turning the wheel during slow speed maneuvers? (e.g. during parallel parking). The best way I can describe it is it sounds like the suspension is being compressed as I turn the wheel as the car has almost come to a complete stop. (yes I know we should avoid turning the wheel when stationary). I realize it's probably normal. I'll just add it to the list of other noises my car likes to make. My car is bone stock btw.
View 2 Replies
Advertisement
I've gotten it a couple of times lately while turning at slow speed. The first guess is always the CV joint/boot - but wouldn't that be multiple pops?
View 12 Replies
I have about 48k miles on my 2010. Colder weather seems to bring out lots of noises. I can hear a suspension crick noise when I hit a bump and slow speed up the driveway apron. Got me thinking about shocks and struts. How long do they last?
View 7 Replies
I recently bought an'08 Base model. It is making a creaking noise in the front end on the left side either behind the wheel or under the motor. It only does it when taking off from a stop and/or turning mainly to the right during slow speed, seems to be when the body weight is shifting. To me it sounds as though something needs greased or maybe a strut.
View 2 Replies
I own a 2009 VW tiguan 2TSI 4WD. Lately i am experiencing undercarriage low tone grinding noise as i made turns at slow speed. i am not sure if the noise is coming from the rear or front. Why and what should i do about it.
View 3 Replies
I purchased my .:R last summer with just over 100k miles on it. Two prior owners, car was fully stock and in great condition except for one thing:
Humming/vibration ("brrrrr" sound) coming from the back of the car when turning at a slow speed with the wheel fully cranked, e.g. moving out of a parking spot. It only occurs when moving, and with the wheel fully or almost fully turned in one direction.
The guy I purchased it from brought it to a local VW dealership when he noticed this and they (obviously) did not find anything wrong with the car, and blamed it on the tire wear.
So I changed all four tires. Still made the noise.
Haldex oil had been changed by the original owner but not by the second owner (who owned the car for two years prior to my purchase). So I had the Haldex oil changed and my mechanic said it was dirty AND at a low level, and might be the source of this problem. The noise did diminish for a bit, but it is still present.
So, I'm afraid my transmission or differential are fried from running on too little oil. It does not affect anything but it is definitely worrying me.
View 12 Replies
So yet I found out about another common issue but not that publicized. This is the grinding sound when turning at full lock (left or right) in slow speed. I've read several people in the forum who has encountered this. I read different remedies but the most common one is to have the CV boots lubricated.
I have a 2014 Wolfsburg with almost 5k miles. I am really now worrying about my water pump crapping out on me but I heard this grinding sound yesterday.
View 12 Replies
I've had my R sitting on KW variant 1 coils for about a month now. When I first installed the coils, I adjusted them WAY too low for my liking (looked flawless but wasnt practical for my driving conditions). On my first couple of drives, I noticed a "popping" sound at very low speeds (like when exiting a parking spot) when turning my steering wheel. It was as though my wheels would turn to a certain point and "pop," it sounds like something popped out of place. If I move my steering wheel back and forth to repeat the popping sound, the sound does NOT repeat (it only happens once in awhile).
With the car stationary, I have looked into the wheel wells with my friends turning the wheels and I dont see anything rubbing. I have since raised the car VERY slightly (still sits on about a 1/2 finger gap) and still, when I first get in the car in the morning and pull out of my garage, I hear this slight pop.
I am planning on doing the "tab mod" on my fenders this weekend because I am rubbing on the tab on high speed turns, but I don't think this has anything to do with the popping. The car drives fine and my friends and I have installed coils tons of times without any problems.
View 13 Replies
So I've recently dropped the car with ST coils and during the install, I had the mechanic installed NEW strut mounts and strut bearings because I've heard people having noises if they only do the coils.
However, even with the new strut bearings/mounts, I would hear clicking noises at low speed going in a out the parking spot or parallel parking (not every time but getting close). Therefore, my questions are:
1. If strut bearings/mounts are new and put in at the same time as the coils, what other reasons could there be that's causing this clicking noise?
2. If the noise doesn't bother me and I can live with it, would there be any negative effects for not having this issue taking care of?
View 6 Replies
A sort of honking/grinding noise, like really loud squealing brakes - but a lower sound, when at low speed, with the wheel turned right for maximum turning. Generally located in the front end.
It occurs consistently when I am returning home, slowing to a stop to pull around a curve in the road, right before I back into my driveway. It occurs with the clutch in or out, and with the brakes on or not. I tried doing slow sharp turns in a parking lot and I can't replicate it there.
It's happened for almost as long as I've had the car, and there's only about 1300km on it now. I've just been trying to track it down to replicate for the dealer. Taking it to the dealer is obviously my next step. I think I'm going to have to take a tech for a ride to my house to replicate it!
Car is completely stock so far.
View 24 Replies
Noticed my 5 week old MK7 GTI is making squeaky noises on the driver's side when turning left at slow speeds. What this could be? Occurs intermittently, not all the time. This is a leased vehicle, would this be covered by warranty?
View 7 Replies
So I got my Haldex fluid and DSG fluid changed two weeks ago. When I picked the car up I noticed a vibration when I was making tight turns. Last week I called the dealer and told them. They said to drive it a bit more to see if it works it self out. But now after getting back from H2Oi, it still is doing it but not as bad.
Its a vibration you can feel and a rumble you can hear when making a tight turn at slow speed. Like turning into a parking space or turning at a stop sign. What would this be? I searched but couldn't find an exact answer.
View 1 Replies
So, I just noticed this happening about a month ago and it's been occurring more frequently. Whenever I'm turning (left or right) and moving at a very slow speed (1 - 5mph), I feel a binding and sometimes I hear a slipping sound (that's the best that I can describe it). When I hear this sound, it feels like the Touareg's gears or center differential is slipping. What it is? If so, was the dealer able to resolve it quickly?
View 5 Replies
Getting a creak sounds like near struts at slow speeds and turning , it stopped when it got cold, but on the first warm day today its back . I did replace the struts, bearings and seats, but have to admit I used the cheapos . I just cant find where its creaking from...
View 2 Replies
2007 G6 Problem occurs at slow speed with sharp turning, such as coming out or into the driveway. As the steering rack moves slowly it tends to stick and release 3 or 4 times when turning sharply at very slow speed. It makes a sound so loud even the passenger cam hear it and the driver can feel it in the steering wheel. Does occur while driving normally. The dealer says its a GM problem with no real correction. They greased the rack and said the problem would return soon, but it is not a safety problem. So far they have been right on both counts. Are there any real cures?
View 5 Replies
Mazda5; 2010; 105,000 miles.
Recently, our Mazda has started making a subdued grinding sound. It happens only when accelerating from idling to 10 miles per hour. It does not occur over 10 mph, in neutral, or park. It doesn't happen when starting the car or in reverse either. according to my wife, it does happens when turning right at slow speeds, but not left.
We have just driven it to our mechanic but it may take a couple days before they are able to look at it.
View 6 Replies
When I go really slow like less than 10 mph and turn my wheels, my struts creek and make noise. Lowered on a H&R coilover kit. I bought car with it last year i am second owner so the suspension is getting old. Possibly old as car is installed when 1st owner bought it in 04. i think the struts are just going bad.
View 2 Replies
i have a Subaru legacy rs 1996 twin turbo, about 6 months ago now i replaced both front outer CV joints and boots due to a grinding when turning at slow speed e.g a car park. the grinding had gone and its was all fine until now the same grinding as come back. its it normal for the CV joint to wear out that fast or could there be a different problem?
View 5 Replies
Immediately after putting new tires on my '02 Taurus SES, steering is really hard at the pullout, or turning at slow speed just after startup. After several seconds, steering is back to normal. I did have the steering pump flushed out with new fluid several months ago, and fluid is up to level now.
View 6 Replies
6L w/automatic trans,no tunes,no mods. Fan doesn't speed up when ac is turned on. I checked connector at fan shroud and #25 10a fuse and wanted to see if there's anything else I can do or check before taking it to dealer. I haven't towed heavy since I noticed ac not cooling at idle but last time I did tow the fan ramped up on hills and stop and go. I'm in Texas so I must get this right asap. I heard of some with manual override so I would like to do that as well but also heard rumors the override can damage pcm. Any manual override?
View 8 Replies
As the title states, I am getting a weird click from what seems to be both front and back when going over bumps or turning slow. Thinking it may be sway bar bushings or something like that, but not 100%... Its also not your typical blown CV boot click either, its more like something is flexing and hitting into something...
View 6 Replies
