Question about my mom's 2010 ES350.
This morning, it wouldn't start. She tried it a second time, and it started. But...
Upon every subsequent start-up, the LCD in the gauges displays "CHECK COMPLETED".
Car runs and drives fine, otherwise. The security light does go off like it should.
My wife called and said her ES350 couldn't start. I told her to wait 5 minutes and tried again. It still wouldn't start.
So I went there and tried to start the car. My first try did not work either. I noticed that the brake pedal couldn't be pressed down. It was quite stiff. So I pressed hard on the brake pedal and tried again. This time it started. It has been working fine since then.
I drove the car yesterday night for about 30 mins and parked it at home and after one hour went back to start the car but it wont start. All the lights working fine it gave me an error saying check VSC system and whenever i start the car it gives me sound zzzzzzzzzzzzzzzzz and ends with a fan sound but wont start ...
View 14 RepliesJust turned 80k and recently noticed a bit rougher at idle. Other than that all has been fine. Plugs, etc. all original. Engine and VSC Light. Autozone ran the scan which turned up the above stated codes. They are defined as Evaporative emission control system pressure. He said it could be a loose gas cap. Checked it and its tight as a drum.
View 3 RepliesSo on monday the following error codes appeared on my car. What needs to be replaced off the error codes?
P0300Random/Multiple Cylinder Misfire Detected2014-02-04 13:48:29
P0301Cylinder 1 Misfire Detected2014-02-04 13:48:29
P2030No Description Available2014-02-04 13:48:29
P3030No Description Available2014-02-04 13:48:29
C0033No Description Available2014-02-04 13:48:29
P0603Internal Control Module Keep Alive Memory (KAM) Error2014-02-04 13:48:29
C1400No Description Available2014-02-04 13:48:29
Check VSC and engine light on dashboard... I am confused what problem can be happened....
My car ES350 2008 ... NEW about 2000 miles ...
I bought a used 2007 ES 350 on July 2012. This morning going to work, about 2 miles from my house my CHECK VSC light and TRACTION light turned ON, just get on freeway and the CHECK VSC light started FLASHING and when this occurred, the car was unable to accelerate, the car could only go about 40 mph and then slowly going up to about 60mph. I was scared and took the next exit turn around and going home. I'm at 41000 miles and out of warranty.
View 9 RepliesMy Lexus was working fine till yesterday, but today when I started (button press) it, it started giving me a Check VSC error and Check engine light along with Slip Indicator started showing up
Took it to Autozone for the codes and got
P0015
P0304
C1201
B2799
When lock button on the remote is pressed twice and held for 3rd time , lights flash but car won't start. I just put fresh battery in remote Haven't used remote start since last winter..
View 1 RepliesYesterday my 2008 ES350 would not start. Called AAA out. I believe they tested the starter and the alternator and found both good and suggested charging the battery. We assumed we left some device on and that ran the battery down although we could not think of what it was.
So I charged the battery on maintenance free setting long enough that the needle quit moving towards zero and just quivered (about 4 hours). Removed charger and started engine with no problem. Took it to neighborhood parts store and had battery tested. Tested good.
Wife ran her errands in it, came home, garaged and figured she must have left some electric device on the previous night. This morning engine would not crank, same as before.
So I have a 2008 ES 350 with 53,000 miles on it. In December of 2015, It was starting fine, then it sat for about two weeks without me driving it. When I went to start it, it had to be jumped. It took longer and longer to start (more cranks) until I took it in. Also there was a delay between hitting the lock button on the handle and the car actually locking. The battery was still the original one, and the dealer tested it and it was in fact in need of replacement.
Now here's where things get weird: I replaced the battery with a brand new Interstate 24f 700 CCA battery from Costco. The car starts now, but it is kind of slow (about 4-5 cranks) to start. Also, the car starts faster (two or one crank(s)) if I first put it into accessory mode then start it.
2010 ES350... Was detailing interior of car, and didn't realize headlights were on. Eventually, battery drained and car would not start. Had OEM, original battery installed at the time. No dashboard lights lit prior to this.
From what I recall, shortly after replacing the battery and getting vehicle started, my slip indicator was solidly lit on dashboard. No other lights are illuminated, and vehicle appears to behave the same.
Fast forward to today, my OBD II scanner (Innova) does not pick up any current DTC's. There are readiness codes stored, but I understand that these are merely emmission related. However, there are historical codes stored which I am concerned may be possibly contributing to the dashboard light. The codes are P1604 and B2799. These appear to be related to the immobilizer system on my ES. I've tried to clear these codes, but they won't go away, so I suspect something is still tripping this. Keys are fine, just changed the FOB battery out a couple of times. I may try my second set of keys to see if it fixes this mess.
Since my OBD scanner doesn't support ABS, I'd like to see if AutoZone or something of the like can detect if there are any codes being thrown by the ABS system. Not sure if this is what is tripping the SLIP light.
I finally traded in my car and picked up a black 2010 ES 350, CPO, with 33k miles. However, i feel a vibration inside the vehicle while the car is idling (even when it is fully warmed up) and i was wondering if this is normal on these models? I have owned a is250, and ls460 and I didn't really notice anything like it. It almost feels like my ex's toyota camry when idling (not as loud of course). Is there a recall that fixes it? or is this normal with FWD vehicles?
View 11 RepliesMy wife's 2010 ES 350 third brake light has an intermittent LED issue. The last 3 LEDs on the pass side flash on/off when the brake is depressed. My understanding is there may be a broken solder joint. My problem is I can't seem to get the assembly out. How the high mount assembly is mounted and how to remove it?
View 2 RepliesI was told that with remote start I would be able to start the car but when I open the door it would shut off and then it would push start. I have a 2011 ES 350. My ls gmc yukon and has no problem but it doesn't have this push button. I want to have a remote installed in my wifes car didn't think it was going to be a problem.
View 14 RepliesI notice a bad smell when I start my 2011 ES350for a short period of time. After that it is fine. Auto has just over 10,000 miles on it. E mail from dealer tells me filter needs changing. Somehow I believe there is more to it.
View 14 RepliesTried to start my 2007 es350 this morning. While I was attempting to start I was also adjusting my seat backwards and the car failed to start. The gas pedal is stiff and so is the steering wheel. The Start button turns orange when I try to start , if I really press down hard on the brakes the start button turns green but when i press it there is a flickering noise but she doesn't start. What could it be ....battery is about 9 months old?
View 2 RepliesSuddenly got the "check tire pressure system" error (not the tire pressure one) so I tried the only procedure I could find, turning ignition on and holding reset tpms button below steering colum. Got the tpms resetting message but the previous message came back. How can I fix that issue? Never had that before.
View 14 Replies1. I think my battery is getting weak.... when i cranked it, it didnt sound strong and the original battery eye says to add distilled water. I am thinking about getting a replacement battery at Costco.
2. so right after it started, the message of "Check Brake System" shows up. Tried to restart but no go. Drove about 15 miles and all seems fine but message is still there.
* is it OK to replace with a Costco brand battery (they have a great returns policy) and is there anything i need to do before or after replacement?
* could the Check Brake System be due to the weak battery? How can I reset it?
* Anything else that can cause this error message?
2014 LS460L "Check headlight system" error popped up. Since the RV mirror failed as well apparently the system is not getting the light sensor signal from the mirror and brings up the HL error. Where is the RV mirror fuse? I took off the fuse cover to the left under the steering column but can't find it. It's not practical to unplug and check all 26 fuses, owner manual is useless...
View 6 RepliesI have tested 07 UL package a while ago, really liked the car, how it drives, really quiet, very smooth, good acceleration, very comfy etc. the only concern for me is it spacious enough ? I'm driving around 90% in town, how is it on a long trips with 2 - 4 people.... ?
Immediately after I parked ES 350, I have tried LS460 07 AWD, somehow it felt under power for me, maybe cuz it's a awd.. ES was faster in my opinion. It had it 100k miles on it, the car felt really solid like a rock, safer, but slower. Maybe a RWD would feel differently.
My plan is keep the car for 5 years or so, I'm also concern about maintenance costs too. As today I'm pretty much can get a LS 460 07 or ES 350 UL 10-12' for the same price.