I can be driving down the road and "blam", the "check parking assist" comes on my nav screen. This message screen comes on and goes off all the time. It comes on when I am not around anything close. I had the parking assist sensors checked and every thing checked out OK. Could this a an electrical problem? If it becomes irritating, I just turn the parking assist off.
View 3 RepliesParking assist & sensors for back is working and show alert in screen but no sound alarm. I need to get more information about the car i just buy it....
View 2 RepliesMy wife has a 2012 ES-350 with the Parking Assist feature but NO NAVIGATION. You have to get within about 2-3 feet of an object before the warning (visual and audible) detects an object in front or the year of the car. Can the "Sensitivity" be adjusted up so it will recognize a danger long before 2-3 feet ? My LS-460 has a Sensitivity Setting in The GPS settings but since her car does not have GPS, I don't know how to adjust the sensitivity to give her more warning of getting too close to another car or object. How to do this ?
View 11 RepliesMy parking assist warning system has suddenly stopped working. (2007 LS460) I'm thinking I may have disabled it while pushing some other buttons or doing something else. I changed the distance to farthest but that didn't work. It was working perfectly last week. I did disable the auto down tilt on the steering wheel. Could this have also disable the parking assist?
View 10 RepliesWhy i dont hear the beeping sound when i am parking my car? i just bought the car 3 days ago and have read the manual and did a forum search. I have pressed the "hold" button on the steering wheel and went to the display to make sure the parking assist volume is not at zero. however, WHY can't i hear the beep sound as i get close to objects? i would like to hear it since i am still getting used to the size of this vehicle.
View 14 RepliesI have a 2008 LS. The buzzer for my front parking assist sensors is significantly louder than when the buzzer sounds for the rear sensors. I have adjusted the buzzer volume to the loudest position (#5), but the volume of the buzzer when the rear sensors activate is still much lower than for the front sensors.
The indicators on the nav screen for all the sensors are working properly. Do you find the volume is different between the front and rear sensors or do I have a problem?
I am asking because I inadvertently backed out of a driveway into a car that was parked directly across the street. I do not recall hearing the sensor sound before I hit the other car. At the time, my sensor volume was set on #3. When I checked, I could barely hear the buzzer from the rear sensors, but could clearly hear the buzzer from the front sensors. Resetting the buzzer volume to #5 has worked a bit, but I still wish the buzzer for the rear was louder.
I got an 07 LS460 without navi but it still comes with a screen. Last week, the display started to work only intermittently and got pretty pissed. Last night was driving without the screen, but when a passenger stepped in, the jolt kinda made it work all over again. However, this morning it didn't work again.
I brought it to the stealership today and they claimed that the fuses are all working and its the screen that is spoiled and has offered to replace it for about 12kUSD. What do you recommend me doing. But first I am gonna try to remove the battery for 20mins tonight to see if it gets better.
While driving home from work today all my control functions stops working. All the steering wheel buttons, radio functions, and the center display screen all froze up. It wasn't until I restarted to car for everything to work again. What all that components have in common?
View 10 RepliesI wonder, how will we know if/when the parking assist sensors stop working? Will the display be missing some of the yellow lights or will we have to find out the hard way?
View 2 RepliesRecently, i just bought an multi-information display panel (with touch screen support) to integrate into my RX330 which is a non touch screen NAV display panel.
The 2nd hand multi-information display panel is from a 2004 RX330 and what are the socket behind the display panel meant for.
what is the 4 socket connectors as indicated in the red circle in the image should be connected to?
What is the problem and fix when you have a check air conditioner msg scroll across the GPS screen?
View 1 RepliesWhere the parking assist sensor is in the front. I placed my license plate too far on the left I am assuming and the sensor is going off. For now I have just turned off the PA until after work. (is the PA a small visible circle?).
View 5 RepliesStarted the car this morning- and got a message. "Check parking brake system" .
The Auto button for the parking brake seems to flicker, and the park light on the dash blinks. Car make ding sound while driving.
2008 LS460
LS 460 of 2008: I was driving on a gravel road with LS 460 of 2008 and sudden the check engine light came on the dashboard whilst driving and also the check psc light came on and battery light came on signalling battery low. then the car just stopped and could not start.
View 3 RepliesI have a question regarding the park assist...
When it snows and I am at a stop sign or red light the FRONT system starts beeping...
And there are no cars in front of me
Have a 2015 GS450H the display shows the park assist picking up objects but there is no sound. Is there a way to turn on the audio for this option.
View 1 RepliesI hear a bit of a squeaking noise. Very minimal. Coming from back when I'm on rough roads. Is that normal. Sounds like it might be from coilover or somewhere in the back.
View 2 RepliesI have a 2005 Prius with around 115,000 miles.
I have the following warning lights on:
1) Check Engine
2) Yellow Indicator, looks like exclamation point inside a circle inside parenthesis.
3) Red Multi-information display (exclamation point inside a triangle)
4) Hybrid System Warning Light on display screen, looks like exclamation point through a car
The engine cranks up just fine and drives forward and backward in the driveway fine. Battery level indicator is blue (see image). I checked for turbulence in the inverter reservoir with the engine off and fluid was flowing.
I checked the 12V battery (using the car's measurements by holding Display and turning lights on and off 3 times) and its value was 12.1 volts without engine and A/C on and 11.8 volts with them on.
The fan in the back right passenger seat is always on now though (I don't remember ever hearing this fan noise before), regardless of engine on or not, even though it's only about 80 degrees outside and it's been sitting idle all day and all last night. It comes on pretty much immediately when the power button is pushed.
My 2012 RX350 now for over a year and like it a lot.........BUT.
There's seems to be a lot "road noise" that's transmitted back into the cabin, like driving over expansion joints on blacktop or rough road surface, is this normal?
I drove a 2000 RX300 for 100,000 miles and don't remember it being this noisy. Interior noise is great and quiet.
Had to get a replacement battery for my 04 GX470. The garage replaced mine with the same model. Turns out the model changed, poles were reversed and I hooked it up backwards. Realized I did something stupid so I took it back and got another replacement. It cranks over now but I have no display screen, radio, climate control, power windows, power seats, and I'm guessing more. I am guessing a few in my engine compartment as well as the drivers side kick. Thing is, not sure how to tell if the engine compartment fuses are blown or not.
View 7 RepliesMy 2012 RX 350 is set so the default display on the screen is the map. I'd like to change it so the default display is the Audio. How do I do this?
View 14 Replies