When I put the car in reverse the doors lock. When I put the car in park the doors don't unlock, but I've never noticed because when I grab my door handle it also unlocks my door...however when my +1 grabs her handle it doesn't unlock her door. Is that normal?
I'm assuming I can change the setting when the car is put in park to automatically unlock the doors.
When I go out in the morning to my c430 and start to reverse always on full lock either right or left the wheels seem to slip or slightly spin - it only happens for a second but it's strange and doesn't always happen.
View 2 RepliesWeird situation. Both remotes seem to be acting up. Especially in the mornings, they will not chime or unlock the doors. The red light flashes on the remote, but nothing happens. I open the door via the key blade insertion into door hole.
Sometimes if I slam the door, it starts working again. Not sure if just coincidence or not.
I changed the remote batteries. But even still, seems odd that it would be the remotes if both are doing the same thing.
I have a 2002 SC430 And its the second one I've owned. And for the life of me. I can't remember if the side windows lowered a little when you open the doors. The past five or so cars I've owned did. But this one doesn't.
To clarify. The windows (Both driver and passenger) Would drop about 1/8" when you open the doors and raise up once the doors are close. is it normal that the Sc doesn't do this?
I have a 2002 SC430 and the seat memory buttons on both doors stopped working suddenly. No work done to the car, but I don't know what gives.
View 14 RepliesI recently noticed the cover for my driver-side door lock seemed was loose and the door lock would move around a bit. Today, to my utter shock, I noticed the door lock cover was missing and it looks like I cannot see the door lock cylinder, worried that it is missing too!
Is it possible for the door lock cylinder to easily fall out of the door if the cover was loose?
I am hoping that the door lock cylinder is somehow physically connected to the door and wouldn't just fall out, perhaps it fell inside the door and I cannot see it. I haven't had a professional look at it yet, but if I am missing the door lock cylinder then I would need to purchase a new lock cylinder and have it cut to match my keys (huge spend, even with Sewell).
The images show what I am referring to, the dark image is an attempt to take a picture of the inside of the hole. The last image is a drawing of the door frame from Sewell with part numbers. Is there a chance the door lock cylinder is somewhere inside the door panel?
I have a 2007 GS350, I look in the manual to program the doors to lock when reach over 10 mph but its not working, it stated to push the start button once then move it to N it can't move if the button is push once.
View 3 RepliesWeird issue started last night--I have an 08 and when you go to lock the doors the two front doors will not lock--you can see them jog a little but do not lock.. The back doors and rear lock fine. also I have them set to auto lock after you take off and again all lock but the front doors?
View 9 RepliesSometimes when the wife and I go out to dinner she wants to leave her purse in the back with the cover pulled. She keeps her set of keys in her purse so with the wireless keys I can't lock the car because the car knows there is a key inside.
View 2 RepliesLast night while getting the circus out of the car, the door didn't get locked. This morning I went out and found the old iPhone I had in my console was missing - the usb cord was strewn across the drivers seat for good measure. So as I'm here changing passwords to anything that may have been connected to that device - I'm wondering if there's a setting that can automatically lock the doors if I happen to forget...
View 14 RepliesReplacing the beeper for the lock/unlock? I'd like one not like every other car in the lot. I always look around when another car beeps. Is it located in a good (accessible) place like the horns?
View 1 RepliesThe battery seems good in key, but I can stand next to car and it will "click" but door wont lock or unlock.
View 3 RepliesIs there a way to step out and lock the doors with the engine still running?
View 12 Replies2008 LS... It's been maybe 12 hours since I drove it last. I've had dead batteries before but the lights still worked dimly and there were clicks when I tried to start... there was at least SOME level of life in the car... but now I get it... NOTHING.... doors won't lock or unlock... not one light comes on...
View 14 Replies2010 ES350, 84,000 miles. I have seen many threads on door locking/unlocking issues but none quite like mine that I've been able to locate. The key fob stopped locking the doors a few weeks ago, neither will the lock button on the drivers door inside the car. No sounds, beeps, lights or mechanical attempts to lock the doors. There are no indicator lights or messages suggesting an issue.
I can go around and manually lock all the doors, hit the lock on the key fob, and the car will beep and light up as if the locks worked fine. I also manually locked each door separately and in all combinations, the only combination which will enable the beep as if the door locks work with the fob is if they are all locked. The fob will unlock the doors however, unlocking has not been an issue.
My first attempt to correct was to disconnect the battery for a few minutes, reconnect and they worked fine for a week or so. The next time, with all the same symptoms, disconnecting the battery did nothing, the fob, however did start working a day or two later. The third time it happened we took the car directly to the dealership who has had it for 5 days and have been unable to identify an issue (the fob started to work on day 3).
Can the 4GS be programmed to automatically lock the doors at a preset speed like 10 miles per hour?
View 6 RepliesJust recently was blessed with an 09 RX350. The driver side door is the only door that will lock and unlock.
The other 3 doors will only LOCK using the fob or interior switch... They have to be manually unlocked.
It's weird that's the drivers side is the only one that works.
2011 GX460 Premium I searched the manual and on-line manual.
1) How do I set the doors to automatically lock when I leave the vehicle?
2) Also, at night when I open the driver's door, the panel on the door is NOT illuminated making it difficult to unlock the door for passengers. This is a true safety issue. How can this be fixed and NO I do not want the door unlock operation buy handle touch or remote to unlock all doors.
The website [URL] ..... is valuable BUT the separate PDF manual sections is poor since it is difficult to jump around within the whole document. Each section of the document reference pages outside the current section. There is no easy way to know what section that page is in.
After going through a car wash my Prius has started locking all doors when I start the car and unlocking driver's and passenger front doors when I turn it off. Kind of wondering how this could happen, but since I like it that way I don't really want to change it back. Is there a way to toggle this and can I change it so that rear doors and hatchback unlock also when I turn the car off?
View 7 RepliesI have a slight squeal from the left rear brake when in reverse. Doesn't do it all time and never when roads are wet. I disassembled the caliper and all looks good. I replaced the pads about a year ago and the noise just recently started, so its hard to blame that. I did not use the brake anti-noise lube......but I never have.
View 2 RepliesIs there a way to have the 2011 RX350 lock all of the doors/trunk automatically when I press the close buton on back of trunk?
Once I press trunk close button on back of trunk, it seems have to wait until it closes before I can lock he entire car and walk away?
If I press the lock button too early, I get the alarm.