Have just leased 2008 pasat 2.0l turbo. Great engine but suspension has loud rumbles /noise on uneven pavement. Have lowered tire pressure to 30 . suspension noise still persists. only have 1500 miles. dealer says that everything is still to factory spec.
View 5 RepliesSpring has arrived and the whoop-de-dues are reminding me that the suspension in my 2013 passat tdi is rather soft. it rides great on a smooth highway but i would be curious if there is a way to change the suspension so that it 'floats' less on uneven pavement and in tight turns?
My goals would be:
1. float less on uneven pavement
2. track flatter and smoother in tight turns at speed
3. maintain highway comfort or dam close to it (99% of my driving)
4. remain at stock height (i am not lowering this car up here!)
It may not be possible to achieve all of this but at this point i do not know what is possible or what the pros and cons are of any suggested changes. A quick search of 'tdi suspension' on vwvortex gave me a few hits but mostly for golf and jettas.
Since Ive got my 2010 Tiguan 2.0 TSI, I hear a creaking noise coming from the front right suspension when riding over uneven pavement. The dealer said it is a common known problem from many Tiguans caused by the engine mount and that VW recommends the change of that part.
The new engine mount is slightly different from the one that is installed in my car. I am still waiting for the part to arrive and to be changed. Meanwhile, I spoke with another 2010 Tiguan owner, here in Brazil, whose car has already received the new part.
He said that the creaking noise has gone but now he feels more vibration coming from the engine and a kind of "diesel-engine-sound" when accelerating... Location of the engine mount: [URL] ....
The "old" engine mount bears the code:
5N0 199 262 G
5AY CN
M086
09/03/27
[URL] ....
The "new" engine mount bears the code:
5N0 199 262 E
5AY CN
M082
09/03/10
[URL] ....
I assume that the first number is the part number, the last is the manufacturing date and the others are either car model or manufacturer code or anything else. Note that the part number is the same, except by the letter suffix: "G" in the "old" one and "E" in the "new" part. Well, the suffix designation does not make sense for an evolutionary design...
My questions are:
1) Is it a new design or is it a roll back to an older part that does not cause that problem although it was probably modified due to another issue?
2) Is this part number specific for 2.0 TSI engine or is it the same for other engines (petrol/diesel)?
3) Which engine mount have you got on your cars?
I'm the proud owner of a 2008 RX350 with low mileage (40,000 miles - US model). I purchased it a year ago and I haven't had any mechanical problems. However it's been 3 months that I have this rattle from the rear, especially when driving over uneven pavement.
I had the vehicle checked by a local mechanic but he couldn't find any loose part at the exception of the spare tire plastic cover underneath that looked a bit flimsy but he couldn't tell for sure... I even did an oil change at a Lexus dealership and they didn't find anything when they hoisted the car but they didn't look hard either....
I've disconnected the tonneau cover and put the release latches, for the tonneau, in the lock position (towards the front of the vehicle). That didn't solve the problem. Lastly I removed my plate cover and still didn't resolve it.
Anyway, the rattle seems to come from somewhere underneath, around the trunk area and is loud when you hit bump or drive on uneven road and it's driving me crazy!
I'm new to the VW world so I'm not entirely sure what this noise can be. That car seems to shake more than it normally would when going over uneven pavement, such as dips and holes. It also makes a terrible clanging noise. Now I know this model is renown for needing engine mount replacements...but it feels like it's the suspension.
View 3 Replies2007 Touareg with 19",V6, with 10,700 miles
Problem: Noise or rattle in engine compartment, at low speed (less than 25miles/hour) on uneven pavement (not potholes). Can be replicated over and over.
The dealer acknowledge the noise and has tightened all suspension parts, greased all joints, replace front-right shock and bushings (for some reason the noise is more prevalent on Right side), put some sort of tool with sensors in different areas of the chassis to "hear" noise differences while driving to determine the culprit.
Description: To me, the noise sounds like there is something lose in either the engine compartment or the area where the wipers are located. Sort of like if there was something (plastic maybe) hitting the chassis (only at slow speeds - I cannot hear it when driving faster I guess because of engine and road noise). I have not been able to figure it out.
The noise was present only on another 2007 with 8K miles.
I have noticed an uneven feel ( slightly ) when I turn hard left vs right. Its firmer when I turn to the left than the right. From the magazine issues I used to read when I look at directional skid pad results the right turn skid pad results are always lower than the left turn because of the weight of the driver.
View 4 RepliesMy 1997 cavalier convertible left side front bounces like crazy on bumps and uneven pavement. Installed new strut, and a new tire and balanced. Still does same thing. Rides great on smooth road. All suspension bushings look good and there is no play anywhere.
View 4 RepliesI've had my 2010 Prius II for less than a month and am not particularly happy with it. I've experienced a slight surge forward when braking on uneven pavement at low speeds at least 4-5 times in 900 miles. This isn't something I can duplicate on demand. When I took it in to the dealer after the first time and asked if the ABS fix had been made to it, they told me my car wasn't part of the "campaign" (aka recall) because it was manufactured in March and the ABS problem had been solved by then. However, it sounds exactly like the problem people were discussing in Jan/Feb.
Once when I put it in reverse in a parking lot it lurched backward (my foot was on the brake) suddenly -- not far, but it was an alarming sensation. It also has a high pitched, barely audible whine when moving (can't hear it if I put on the radio). The mechanic said that was the normal sound of the battery, but I don't remember it from other cars I test drove. Is it normal?
I'm keeping an eye on the dome lights every time I park because I found them on one night (they'd probably never shut off after I parked the car during daylight hours) -- it could have been that the light was switched to "on" rather than "door," but now I'm paranoid and constantly check to make sure they're off when they're supposed to be, for fear of wearing down that little 12 v battery. Not fun.
Well my girls car is acting up again. when you make left turns, you can hear this real loud popping, almost cracking noise coming from the passenger side front tire. its a 06 passat with 88k miles on it. What is wrong with it??
View 4 RepliesI have a 2003 super duty V10 4WD super cab long bed.
loud deep rumble noise when turn on the blower. both heat and a/c. removed the blower and seemed to turn ok. blew out all vents. removed heater radiator cover, checked most flaps to see if working. doesn't seem to be obstruction invent. the flap behind blower clear and functioning ok.
When on second speed, almost sounds like blower motor is out of balance. if run on high for 1 minute, smell electrical burning! Think to replace motor will work? will post another issue with radio and power windows
I have a 2002 accord 4-cyl with a 5-speed with 89,xxx miles. Just a few months ago, I noticed a clunking sound coming from the front suspension when I go over certain bumps. "Certain" bumps are usually wavy pavement or dips (not wide dips, but short/concise ones), and sometimes certain speed bumps. Sometimes the sound happens regardless of the types of bumps though, but the aforementioned ones usually bring the noise quite consistently. The sound hasn't really gotten worse, but it hasn't been getting better either.
A while back when I had my timing belt done, the mechanic stated that one (or more) of my engine mounts were worn. Is it possible one or more of my engine mounts is the source of this issue (from the engine "rattling" around in the compartment. I'm not sure if that's even possible, just a hypothesis) or is it purely suspension. PS. The sound isn't quite a sharp metal on metal sound. Its more of a "thump" or "clunk" coming from the front end (left or right) as if its bottoming out or a bushing or spacer has worn off. Its just loud enough to drive me crazy, and sometimes I can feel it through the floor.
My 06 Sonata LX 3.3 has me smiling except for two items, MPG, which I hope will improve after break-in, and a "k-thump" sound from the area of both rear tires. It occurs as I pass over fairly small bumps and ridges in the pavement, and remind me of the sound that is made by a bad shock. I took it to the dealer at 900 miles. They drove it and inspected the rear end and proclaimed all was OK. They claim it is caused by the low profile tires. I have never had low profile tires before, but it seems to me if that were the cause, the front tires would make the same sound, but they don't. The front end is sooo quiet. All tires have the recommended 30 PSI.
View 469 RepliesWhen I drive over quick choppy bumps in pavement I get a rattle in the rear of the suspension, but only when the bump is on one side. When the bump is long and activates both rear wheels, like a speed bump or a large road crack I don't get the rattle.
The sound seems to be worse on the right side and I can't really figure it out. Anything specific I should look out for?
I just did my brakes and now I have this squeaking noise when going over speed bump or on uneven surface at low speed. I figure that the springs was decompressed when the car was jacked up and it would settle back down when the car was lower back down. Its has been over a week now and the noise is still there.
By the way, I replaced with Hawk ceramic brakes and it's great. No NOISE and NO brake DUST.
I have coilovers on my R32 with adjustable control arms and have been noticing a "thud" type of noise when going over uneven surfaces which appears to be coming from the rear.
I actually periodically noticed this noise when I first got the PSS's put on my car when going over larger bumps/dips in the road but lately it is becoming much more pronounced - occurring over uneven surfaces like parking ramps or driving over crappy roads. Over smooth surfaces, no problem.
Thought it was my rear sway bar bushings since they were making a really bad creaking noise, got those replaced and still noticing this damn noise.
For several months there has been a rumble from the rear like suspension is faulty but inspection of strut and other parts showed no obvious issues. 60,000 miles one owner.
View 8 RepliesI just bought used 2011 sonata 2.0T ltd. three weeks ago and i just figured that out when i turn the steering wheels both sides while car stops and pressing the brake pedal there is sound comes out from front and rear suspension.
View 2 RepliesI have a 2010 Santa Fe with only 8k on it and the suspension sounds like a 10 year old pickup truck when I drive on any uneven surface under 30mph. I took it to the dealer who said that sounded normal. After going on a test drive with me he said that he did hear something on the passenger front clunking. He replaced the end link on that side and said that they normally wear out at around 15k. He checked the torque on all the other suspension bolts and said that was all he could do. It seems a little bit better, but it still sounds horrible at low speeds. I don't hear the knocking at highway speeds when I hit any bumps. What it can be? It feels like the struts are hoping or crashing over the bumps instead of absorbing them. My 10 year old Ford Explorer drove nicer than this. When I told the tech that my cheapo 2010 Nissan Versa doesn't make this noise when driven on the same roads he said that the Nissan was a much better car than the Hyundai. Did we make a horrible choice buying this thing?
View 41 RepliesI have a new to me 1999 f550 w/ 7.3 and I have installed an aluminum service body with a crane on the passenger side bins. The crane itself weights about 650lbs plus the steel frame it is mounted on (superstructure in the aluminum service body). I'm concerned about the uneven load on the rear suspension. It does sag slightly to the passenger side - guessing 1" - I will measure tomorrow.
1) Should I be concerned?
2) What can I do to correct it? (without just adding weight to counter balance it).
About 3 weeks ago, I noticed the SUV would occasional make a loud "CLICK" sound in the front steering area, usually if I made a fast turn motion (either left or right).
So today I put it up on a ramp and took a look and it's obvious there's a part in there that is coming loose. I don't know what the names of the stuff is in there, so I'm posting a photo with arrows & letters so people can tell me what's what, and also what to do.
I tried putting a vise grip on it and tightening it with a ratchet wrench on the top part (16mm), but the lower nut just spins. I decided to not go any further because I really don't know what that assembly is, what it does, if it's broke, etc.