Passat (B6) :: Ignition KEY Fob Coding?
Sep 10, 2010
I bought a fob from eBay.. but I couldn't find anywhere the coding procedure.
View 4 Replies
Sep 10, 2010
Advertisement
Passat (B6) :: No High Beams After HID Coding
I just had my car coded for aftermarket HIDs and i have no high beams and a bulb out indicator on. did i miss a step in the VAG coding or will the high beams work when i put the HIDs in?
View 6 RepliesPassat (B6) :: Instrument Cluster Coding Causing ABS Module To Throw Codes
I'm set on having the European parking light feature (when the car is parked and you walk away from it). For those of you not familiar with it, by changing the Instrument Cluster coding from a 2 (USA) to either a 1 or 4 (UK or Great Britain), you can turn the car off, hit the left turn signal assuming you are parked on the right side of the street, and after getting out and locking it the 194 amber front bulb and the LED red rear ring stays on. This aids in traffic seeing your car parked on the side of the road.
Problem is that once you change the country, you get this in the ABS Module:
Address 03: ABS Brakes Labels: 3C0-614-095-C2.clb
Control Module Part Number: 3C0 614 095 S HW: 3C0 614 095 S
Component and/or Version: ESP 440 C2 H015 0004
Software Coding: 0013752
[Code] ....
What changes need to be made in this module to avoid this? The pop-up window in the coding section doesn't say anything about different countries so I'm not sure which numbers need changed.
Touareg :: TPMS Old Coding Does Not Work With Controller
Have one of at least four different software codes, depending on your version of the TPMS controller. For the old controller (which I used to have, and which is present in, for example, air cooled rig), the coding is 0012339. (There is also 0010339.) The new coding below is only if you have coding 0210390 and possibly if you have coding 0211390. The old coding does not work with my controller, and I do not know if the new coding works with the old controller.
Use VAG-COM:
1. to put the option to turn TPMS on/off into the MFI.
2. to get "inflation info" back into the MFI.
Change the software coding to:
0110390
Touareg :: Blinker And Rear Fog Light Coding?
I bought myself a nice brand new Touareg 2011 (7P). I have ordered German accessories in order to activate the amber blinker instead the red and the rear fog light incl. the light switch. But now I'm stuck at the coding in order to activate the functions. Any clue which CU and address I have to change in order to teach the brake light not to blink and the fog light to function?
View 3 RepliesGolf/GTI VI :: 2010 - Coding Rejected After VW ABS Module Replacement
I own a VW GTI 2010. I replaced my abs module from 1K0 907 379 AM to 1K0 907 379 BE which is compatible with Park assist 2.0. I tried to code it with the previous coding with 00 added at the end but it got rejected. Since, then I've been trying very hard to code it.
I've tried at least 20 different coding some on which were provided by "16 D", a member friend in the forum, but they were all rejected. I still don't understand why other people were able to recode their module with the same previous code with 00 added at the end but I cannot. Is there any chart for generating such long coding?
Golf/GTI VI :: 2010 - Airbag Control Module Coding
Need coding info for 2010 Jetta sedan 2.5 Air bag control module. The part # is 1K0 909 605 AD/004, Component # Airbag VW8R 036 8900. I am using a Vag-Com version 10.6 ....
View 1 RepliesGolf VI R :: LED Tail Coding - Got Check Right Rear Light Warning?
Installed last week, LED no fog. Everything worked great but I had the bulb out error. Yesterday, I had the coding done and I now have an issue. Worked fine when I left the dealer and this morning I have a "Check Right Rear Light" warning. The right rear is no longer lit. Back up light works, tail light does not. I think the dealer changed byte 18 to 21 but also changed the setting from NA to something else... maybe ROW.
View 9 RepliesToyota - Avalon :: Navigation Unit Started Coding Check DVD And Error
My 04 navigation unit started coding check DVD and error; I took it to my dealer who advised that the Unit is defective and is causing a ridge to form on the control disk. Dealer advised to call the Toyota 800 number due to my 36K warranty is gone. Called toyota and they referred me back to my dealer who is giving me the stall.
View 30 RepliesPassat (B6) :: ECM Disconnected With Ignition On
I recently tried to replace my heater blower resistor, whilst looking for this under the glovebox I disconnected the ECM (convenience system electronic control module) with the ignition switched on.
I quickly realized that the heater blower resistor was not located within the ECM box, but when I reconnected it the following warning lights appeared on the dash:-
1. Electro-mechanical steering assistance light. Amber color lit continuously.
2. Fault in the parking brake system. Amber color flashing.
The steering is not as it was, it will not return automatically after cornering. The parking brake works fine.
I've bought a Haynes manual and section that covers the replacement of the ECM states, "ensure the ignition is switched off". Unfortunately this eludes to the fact that I have damaged something, but does not diagnose the problem.
My thoughts are that I have blown a fuse or the ECM by disconnecting and reconnecting it with the ignition on. The ECM units are expensive, and I do not want to replace it if the problem is a simple blown fuse.
Passat (B6) :: 2007 - Key Fob Stuck In Ignition?
My friend has a 2007 Passat 2.0 T Wagen. He went to start it up this morning with no problems, but the car shut off after a few seconds and it said mobilization activated. The key won't come out of the ignition.
View 6 RepliesPassat (B7) :: Way To Charge Phone With No Ignition?
I would like to be able to charge my phone even when the ignition is turned off. My last car has two power ports, one was switched with the ignition and the other one was always live. It seems in my '14 SE that both ports are switched with the ignition.. I'm actually considering adding a live port to the inside of the glove box.
View 2 RepliesPassat (B6) :: Horn Goes Off For About 1 Or 2 Seconds When Ignition Is Started
When I start the ignition, the horn goes off for about 1 or 2 seconds. While engine is on the horn is not operational (I press and nothing).
2006 Passat 2.0T
Passat (B6) :: Wipers Move When Key Removed From Ignition?
Sometimes when I take the key out of the ignition, the wipers move up slightly. I notice the passenger's blade most as it parks a bit higher than the driver's blade, so when they move up the right one is more obvious. They don't move a full cycle, just up about an inch and stop.
View 16 RepliesPassat (B6) :: Startup Taking About 8 - 10 Seconds When Put In The Key Fob To Ignition
just wondering what are the problems typically associated with a long start up. it took about 8-10 seconds from the time i put in the key fob to ignition. it was especially cold and windy today, so i know the cold had something to do with it.
View 6 RepliesPassat (B5) :: Oil In The Ignition Wires And Spark Plugs
Today I ran into a problem while i was changing my spark plugs ...two of the plugs were completely covered in oil. I mean oil was literally dripping off those plugs. I have a Passat 1999 2.8L V6. What could be wrong.
View 3 RepliesPassat (B5) :: Won't Start And No Crank - Ignition Switch?
well for a few days the car woudln't start every 10 times or so , i'd turn it back and forth a few times and it would kick over , then tonight wife took it and it just wouldn't start so i went and picked her up and tried it about a 100 times and called a tow truck
so what does everyone think it is, everything else is normal but the no crank. ignition switch maybe? I'm going to try and pop the clutch after it gets here, i didn't have the room or distance to try it where it was
Passat - Volkswagen :: 2002 - No Ignition / Will Not Start
2002 vw Passat GLX 4motion... Car has been driving fine with no issues. Then out of the blue it just won't start back up. Battery is 6 months old. And wouldn't start with a jump. I think it is a completely different issue. The power windows stopped working but other features do work like stereo power seats interior lights...Main problem is no lights on dash whatsoever. But when key turns from accessories position to starting position nothing happens. No clicking, no resistance between positions it is as if the ignition is just missing..?
View 2 RepliesPassat (B6) :: LEDs On Headlamp Flickered When On With Key In Ignition
So I noticed the other night that one of my LED's on my headlamp flickered while they were on, with the key in ignition. As of today, the driver's side LED light went out. Where to to tap into to make an attempt to figure this out. Wires and connector seem to be all in tact.
View 5 RepliesPassat (B6) :: 2007 - Won't Start - Not Sensing Key In Ignition?
Several weeks ago I was getting an airbag fault. I brought my car in to get the female part of the seatbelt changed out. Less then a week later I started having issues with my ignition! It's not sensing the key being in, and won't start the car. Pushing the key in to start the car nothing happens, the radio doesn't turn on, with the drivers door open it doesn't give the warning that your keys are still in the ignition...it doesn't do anything?!? Now the dealership (that I've had a good relationship with) is trying to sell me an ignition. I'm curious if it's their screw up when changing out the seatbelt? can't afford to put another $300+ dollars into the car!
View 1 RepliesPassat (B5) :: 2003 Misfiring - Ignition Coil Faulty?
I have a 2003 passat 1.8 and I just started having a misfiring problem. I googled it and ran across a 2003 press release that VW had recalled them. I am going to call tomorrow, but I did a little testing myself. Probably not the best thing to do, but this is what I did. I had my wife start the car and I pulled off the coils until I hit the one that didn't make the car shake any more than it already was. It is the second one from the front. I pulled the spark plug out. It is the original, but didn't look too bad.
My question is: How do you test the ignition coil to see if it is faulty or if it could be the distributor? The coil that attaches to the plug looks a little burnt around the rim where it connects to the plug. Its not an expensive part, but I don't want to go buying another one just to find out it is the main distributor or something else...