Phaeton :: Cannot Change Ride Height At This Time Message In Instrument Cluster
Aug 2, 2014
The other day I saw this message (or something similar) in the instrument cluster display for the first time. I was parked, car unladen, engine not running, parking brake on, facing somewhat uphill, when I attempted to change to the higher ride height.
The Handbook doesn't refer to conditions for ride height adjustments.
I'm pretty confident my batteries are fine. I attributed the reluctance to the fact that the car was pointing uphill, though on reflection may that not be exactly a time when you do need to change ride height?
A few minutes later, driving on the level, the ride height adjusted perfectly well, and it has done so since whether moving or at rest.
View 2 Replies
Advertisement
My 2004 Phaeton with a little over 100k miles on it has been giving me a problem with the air ride suspension. When starting the vehicle, a "Level Fault - Workshop" message is displayed on the instrument cluster, and the car has been slowly sinking as the air ride (I presume) slowly deflates. Around 10,000 miles ago, I had a problem with the suspension, but that time the car immediately and actively sank; this was solved by replacing the air ride computer (it is the B, not C-type). I've tried replacing the computer with another B-type computer, but to no avail. The local VW dealer and an independent import car garage have told me some things, and I would like to learn more about this problem and possible ways to try and solve it.
1. I have been told that no voltage is making it from the computer to the left front sensor. Dealer says its the computer, but could this possibly be the wiring harness or a bad connection? If so, how do I get into the wheel well in order to test this hypothesis? My best guess is it isn't the computer, as the car never actively sank (this happened when the original computer went bad).
2. I have also been told that the right rear sensor is bad. Is this a part I can replace with a modest amount of auto knowledge? I do my own oil, replace brake pads/rotors, etc. If so, any drawing/maintenance manual parts list available?
3. I have heard conflicting reports as to a freshly-ordered sensor being and not being compatible with the B-type computer. Dealer told me new sensors will only speak to a C-computer; independent garage told me new sensors will speak to my B computer. Who is correct?
From a few hours of internet browsing from the first instance and this second instance of failure, it seems this is a somewhat common issue with the 2004 Phaeton.
View 7 Replies
Looking out the window at the over 2 feet of snow in the driveway makes me wonder....how low can I drop the ride height?? I have already lowered to ROW specs -10mm and have just recieved a set of 19" Helios wheels from Santa to install in the spring. Do I fudge the controller for another 10mm or install the adjustable link kit from "LOWERMYRIDE"??? What is the sweetspot 20mm,30mm??
View 3 Replies
I'm over at my sisters and she is complaining that her ride height adjustment does not work. She needs to use it for the car to clear the end of her garage (there is a small ledge at the end) I hop in and push the button... nothing happens, nothing in the infotainment or MFA. I'm wondering if the switch is not making contact? Or could it have something to due with the not enough air pressure? I think I'll try to put it in "jack" mode, maybe that will reset it. Anything else I should try? I guess I'll drive it in to work for her (which is normally fun for both us, she likes to drive my R32 and I love driving the Phaeton )
View 18 Replies
I have a 2012 F350 XLT that came out of Canada. So of course the speedometer is in KM. (Large numbers are km and smaller numbers are mph). I am trying to find out if I can simply change out my cluster with a mph cluster???
View 4 Replies
I am looking into buying a used R32 and as I drove it, a warning came up on the instrument cluster that the door was ajar and it was german text. Is this something that all R32s have? Or is it possible to be changed?
I tried searching but couldn't figure out the proper search terms. I'm not sure I'd even want to change it as the german is pretty cool. Just wondering if this was something that was changed by someone at some point or something screwy with the car's computer.
Also, I know the MKV says what number your car is /5000 on the steering wheel. The MK4 doesn't show that but is that number on the car somewhere?
View 9 Replies
When I choose the screen on my instrument cluster that is suppose to show speed I do not get a reading. It shows 0 mph. The average speed shows correctly, but nothing else. The correct readings are displayed on the center console unit including speed and average speed so I think the sensors are good. Is this something that can be corrected using VAGcom.
View 4 Replies
Just wanted to check my memory / mode of operation of instrument cluster illumination... I seem to recall that the main instrument cluster dials were illuminated at all times, ie full brightness during the day with the headlights off and with variable brightness at night with the headlights on - is this correct?
Reason for asking is that the main dials, speedo / rev counter are now dark when the headlights are off - this does not seem right as, in other than bright sunlight, the dials are very hard to read - centre LCD display remains back lit OK.
With headlights on, illumination works as expected - when headlights go off, the main dials stay illuminated for a fraction of a second and then dim to off.
View 3 Replies
In the past few days, I've noticed that when my headlights are on the white backlighting of the speedometer, tachometer, and other gauges in the instrument cluster fail to illuminate, however the red needles within each gauge do illuminate properly. Furthermore, the rheostat adjustment does successfully brighten and dim the red needles, but the faces of the gauges remain dark. I checked fuses 23 and 27 and both are fine.
View 24 Replies
The information screen is out on my '04 instrument cluster, and I hear that I have to replace the whole cluster. Can I replace it with a used cluster, or does it have to be new. The dealer is telling me that it needs to be new in order to do the reprogramming of the keys, etc.
View 5 Replies
The instrument cluster screen in my 2004 phaeton suddenly stopped displaying anything today, I've tried removing and replacing fuses but still nothing, not even the backlight for the display is on, everything else is working fine its just the display. I need the car for a 600mi trip in 2 days.
View 3 Replies
My car lives in a parking garage which by nature is well shaded. In the last few weeks, when I start the car, the orange hands on the instrument cluster come on at full brightness (which I think is normal), but the rest of the normally "on" panel fails to light up meaning, that the white digits on the speedometer range are dark, the ones in the tachometer, etc.
The dash looks like something from science fiction, which is cool, but is nearly useless when all you see is a bunch of glowing orange pointers! After a few minutes, the back light turns on through no action of mine and all is well in the analog instrument cluster area.
View 2 Replies
In the past few days, I've noticed that when my headlights are on the white backlighting of the speedometer, tachometer, and other gauges in the instrument cluster fail to illuminate, however the red needles within each gauge do illuminate properly. Furthermore, the rheostat adjustment does successfully brighten and dim the red needles, but the faces of the gauges remain dark. I checked fuses 23 and 27 and both are fine.
View 24 Replies
Today I had the joy of covering 200+ miles on my W12 today. While I was out and about there were 3-4 times I went around a right hand turn somewhat quickly and a "check please lights" warning appeared on the instrument cluster. At the end of the day I inspected the exterior lights with all working or so it seems. I found it odd that this only appeared during sharp turns to the right.
View 10 Replies
I've had a Phaeton since January and love it. I noticed yesterday that the "distance remaining" figure in the small nav screen in the instrument cluster has disappeared: it now shows "---" instead of, say, "150 mi." Refilling the gas tank hasn't made a difference. Why the car has started refusing to estimate? Since that's the display that shows all the time while driving, it's particularly noticeable.
View 4 Replies
Someone mentioned that the lighting on the speedo/revs came on after a delay instead of slowly getting brighter. Anyway mines now doing this, the needles light up red then maybe 15 seconds later the background lights come on.
View 24 Replies
The lighting on the speedo/revs came on after a delay instead of slowly getting brighter. Any way mines now doing this, the needles light up red then maybe 15 seconds later the background lights come on.
View 24 Replies
I am getting some coilovers soon, but noticed a lot of people having camber issues when slammed, I am not looking to be on the ground, just wanna get rid of wheel gap. My goal is to have 1 finger between the tire and wheelwell. Is this doable without issues?
View 8 Replies
I already have sport Eibach springs and my shocks and struts are about to go, but this gives me an opportunity I can either go coilovers or all sport suspension. I want to go a little lower though than what its sitting at now, especially when I put my 18x8 wheels on. I definitely want to go static, air ride is too much. So I was wondering if I went with the blistein sport shocks and struts with the sprt eibach springs would it sit lower?
View 14 Replies
Here is my 2004 Excursion PSD. The X was already lifted when we bought it, but I'd love to return it to stock ride height or near stock w/ the larger tires on 16's. So, not having been around 4x4's for long, how the heck do I figure out how it was lifted? Shackles, different springs, who knows??? Basically is just too much of a PITA not fitting into car washes and not being able to fit it in my garage for repairs.
View 14 Replies
Myself and ZAC1 have an identical issue regarding ride height on our GT's. The rear driver side is lower than the rest of the car (or the passenger side is higher).
In my case you can notice it just by looking at the car from a distance, mainly from the rear. Using a tape measure to check the height of the wheel well to the ground, the driver side is 26", the passenger side is 26.5". I have measured it on a variety of surfaces just in case my garage was on a slope.
View 10 Replies
