I've noticed that about every other time I put my SFS in reverse, the rear camera appears with no guidelines only to flash off after a few seconds and then come back on with the guidelines. Other times, it comes up right away with the guides.
What's causing this and is there any sort of fix for it?
All of the backup camera systems I have seen (which are in Chevys) have superimposed guidelines on the camera view to align the vehicle into the proper spot between the parking lot markings. I road tested a 2014 RX350 with Nav system (with backup camera) the other day and it did not have these guidelines. It just showed a nice rear view picture but offered no assistance in aiming or aligning the vehicle when backing into the parking spot.
Is it just possible the guidelines were turned off in the Nav menu somehow? On the other brand cars, the guidelines actually curve as the steering wheel is turned -so you can use those line to perfectly back into a space. It would be a big oversight IMO if Lexus didn't build this guidance feature into their backup system.
I did a quick search but couldn't find anything. I'm in Canada and just on lunch today, my backup camera decided to stop working unfortunately. Now, when I put the car into reverse...the screen goes black, nothing is on it. I'm not certain if I pushed any buttons or anything on it to turn it off. I did a little research and it could be a frayed wire causing the problem?
View 18 RepliesJust bought a new Tiguan 2013 for my wife, which has the rear view camera. However upon reversing, there's no beeping to warn you that you're about to hit something.. Shouldn't that be the case?
My only experience of rear view camera's are on rentals and they've always beeped when something is in view.
Menu -> Setup -> Phone -> Phone Display Settings
Display Phonebook Transfer Status: Off
Display Call History Transfer Status: Off
Menu -> Setup -> Bluetooth -> Detailed Bluetooth Settings
Display Phone Status: Off
Display Portable Player Status: Off
2013 F350 Lariat with the factory OEM rear view camera. I am replacing the tailgate with a 5th wheel tailgate for a few months and would like to still retain the convince of a rear view camera.
I have obtained a Ford camera harness to use as a jumper for a non OEM camera which comes with the standard basic RCA wiring which I plan to mount to the bottom of the 5th wheel tailgate.
My hope is to wire the camera direct to the Ford wire harness which is a 6 wire pigtail. Which wires on the camera mate to which wire on the trucks wire harness.
I have a 2013 GS350 F-Sport. Every so often (maybe once every other week), I'll observe the VSC indicator appear after I slow down to a complete stop, such as at a traffic light. The indicator light remains on while I'm stopped. Once the traffic light turns green and I take my foot from the brake pedal to the accelerator, the car hesitates for a moment, as if trying to figure out how to gain traction, but I then get going, and the VSC light disappears and that's the end of it (usually until it happens again a few days or a couple weeks later). Whenever this happens, the road is flat and dry, so traction should be normal and no problem.
The only other piece of information that might be relevant is that I now believe I can reproduce similar behavior: if I'm at a traffic light, or even just parked, and I simply step down hard on the brake pedal, I observe that the VSC indicator light appears. Perhaps this is simply what is happening in the instances I have observed this when stopping at a traffic light. Still, I don't understand why pressing down on the brake pedal with a little extra pressure when parked would cause the VSC light to appear. Is this normal behavior? Only the VSC light appears in these instances, no other indicators or warnings appear.
i have 2009 Hyundai Santa fe 3.3 , My problem ( sometimes when i turn on my car, ESP Light appears off on my dashboard after 8-9 mile and Car speed can not increase more 40 km/h
View 5 RepliesI've had my car less than 3 weeks and the past two days I woke up in the morning and found my windows to be wet with condensation inside. I felt my rear passenger floor liners and mats and they are soaking wet. It had rained a lot in the beginning of the week. What could it be?? Santa Fe 2013 2.0T ...
View 12 RepliesRear end Suspension noise, '13 Santa Fe Sport 2.0T? I purchased a new '13 Santa Fe Sport 2.0T in Sept. 2013. Shortly after I noticed the rear end of the car creaks/squeaks when the suspension compresses thru it's travel. This happens when driving over tall speed bumps at 2-3mph or into/out of steep driveways at 2-3mph. Rear end noise/squeak at anytime?
View 49 RepliesI just got word that the rear differential is bad. Santa Fe? I only have 9000 miles on my vehicle.
View 24 RepliesRecently replaced plugs/wires on soon-to-be 10 year old '04 SF 3.5L (157K mi.) for the first time.
Plugs were OE Champion Platinum and all 6 looked identical except for excessive gap of .010 +/- due to all the miles. Replaced plugs with same as OE. Old plug wires looked good, but replaced them with aftermarket wires ( fit was as good as OE). Also replaced plenum gasket.
Problem is: engine runs rough at idle and high rpm and appears to be mis-firing. CEL is off and code reader shows no Trouble Codes stored.
Our SFS LTD started this high pitch constant squeaking sound in the back of the hatch/cabin. We can't figure out where it's coming from. It doesn't seem to have any relation to the suspension (going over big bumps), and occurs on regular driving on flat terrain or regular street bumps/turns, city/highway...
We figure something is rubbing in the back or perhaps its due to a bulletin from the 2008 SFS (welding fix in the rear panel)?
So I picked up my new 2016 LWB loaded 6 passenger Santa Fe yesterday and I'm finding today that NONE of the heated seats are doing anything. The ventilation (fan) works, the heated steering wheel works, but all 4 seats are inoperative. Now, I'm coming from a 2014 Santa Fe Sport with the same heated and ventilated seats that worked fine, and my life has a 2015 Genesis 3.8 AWD and hers all work fine. I've checked the fuses located in the dash and those are fine.
View 2 RepliesI bought a used 2013 Santa Fe Sport 2.0T Limited in August from a Hyundai dealership near Vancouver, BC. The vehicle had fairly high mileage (95K) but had been well-cared for and I got it for a fair price.
After a few days I noticed there was a "crunching" noise coming from the rear driver's side quarter panel area when going over the u/g parking ramp into my condo. The rear seats also jiggle and rattle at moderate speeds. Didn't really notice either on my test drive before buying it, as I just went over smooth roads.
I searched this forum and found some good leads, such as the inner quarter panel being loose, rear trailing arm issues, or perhaps some faulty welds. I printed out this info. reported by other owners and brought it to the dealership.
As kind of expected, the technician each time has said he couldn't hear anything unusual. (selective hearing?) The suspension system is supposedly sound.
My friends and family members all hear this creak (under the right conditions when the rear wheels are at uneven heights)...it's not my imagination. I've taken out the styrofoam cargo support and nothing changed.
I had a loaner 2015 Santa Fe and there was no such noise.
The rear seat jiggle is also irritating. I've experimented with putting the seat backs at different angles and nothing really works.
The vehicle has about 500KM left on its 100,000KM warranty.
The key FOB and the rear gate not opening? Salesman says the button is for the rear gate only to unlock it and not open it. Need to confirm whether it is supposed to open the trunk or just unlock it?
View 27 RepliesHaving problems with the paint chipping on the rear bumper? Dealer said on the phone paint is only covered if it rusts. Will bring it in tomorrow for them to check, but I'm not getting a good feeling that they will cover it. Car has only 3500 miles on it! Bumper shouldn't be chipping like this.
View 18 RepliesI have had my Santa Fe since middle of January and have some issues with rubbing noises and popping noises from the rear of the vehicle since then. The rubbing noise has been resolved, but the popping noise appears to be more of a challenge. I have had the vehicle looked at 4 times.
The way the mechanic at the dealership explained it to me is that between the outer body panel and the inner trim panel there is a piece of sheet metal that is flexing and popping. This is most noticeable at low rates of speed and more when turning left or right.
The past two times the dealer has reposition the pieces and the noise has went way for a few days, but always returns. So today I asked if maybe there was a wield missing or what we do if the problem continues after the latest fix.
One suggestion was to fill the gap between the sheet metal and the body panel. They mentioned foam or cardboard.
2015 SFS 2.0T was oil sprayed at Krown 3 weeks ago, since then have developed a clunk in the rear end when reversing out of our driveway or at city speeds going over bumps. Google search came back with possibly oil spray on leaf springs as culprit? I have removed everything from the rear cargo area, also looked high and low, driven with hatch open and closed and also sat back there and had wife drive around....can't figure it out....
View 11 RepliesI wanted to bring attention to an oil leak I discovered today. It appears to be from the rear main seal. My Passat is a 2015 1.8Tsi with the 09G auto. You can see the leak with the belly pan on. From the front of the car, looking through the vent for the transmission pan look at the lowest point on the bellhousing there is a small machined flat area. Pictured is that area (with the pan off). There is also oil on the back side of the bellhousing on one of the main bolts between the block and trans. The three rear bolts on the pan need to come off to see that one. I would recommend looking at this area on your Passat. Currently my Passat has 3,490 miles on. It's not a terrible leak, but it is worse than what should be present on a modern, new vehicle.
View 16 RepliesToday I noticed a strong burning rubber or plastic smell coming out of the right rear wheel well. All other wheel wells did not have this odour.
We had a bout of freezing temp's here recently and some snow, I'm wondering if the brake on that wheel may have seized slightly through the all wheel drives tourque vectoring or through parking brake use.
I'm going to drive it to the dealership tomorrow without making an appointment in hopes they will look at it right away as making an appointment this time of year is probably going to take forever.
Something I might be missing or can do?