Sonata NF (2006-10) :: Front Brakes Clicking Sound
Aug 2, 2014
I just replaced rotors and pads on my 2007 Sonata. I got top of the line premium rotors and ceramic pads from Napa. Cleaned the oil off the rotors and gave them a light sanding before installing, made sure that the caliper bolts moved freely and the caliper pistons were not seized and also used new hardware kit (springs?) that came with the pads.
Everything seems to be ok, except for a clicking sound that occurs on hard breaking as the car is coming to a stop. I think its caused by the pads moving within its mounts (I did notice it was very easy to slide these pads into the mountings, more so than in previous pad replacements).
Reading from other posts I think this is still safe, but the clicking does bother me, should I use pad adhesive to stick the pads to the caliper?
View 7 Replies
Advertisement
I have this clicking sound from the gear of my car every time i step on the brakes, is it normal or do i have something to worry about...
View 1 Replies
So I just replaced the front rotors and brake pads on my 06 Sonata. Before I replaced them, the front passenger side had a clicking sound coming from it when I turned. So I thought this whole time that I needed a new CV joint. But after I replaced the rotors and pads I took it for a test drive and I noticed that the clicking noise was gone! So I guess my question is, can bad brake pads and rotors cause a clicking sound when turning?
View 4 Replies
I've got a clicking in my car right now, it's not a constant noise, but only after I've been driving awhile without using my brakes. Slowly gets louder and louder. Goes away completely when I put my brakes on for a second and starts again when I let off of the brakes. Its speed related, so its quicker when I'm going faster.
View 1 Replies
Still learning about my 2006 F-350 dually.
I've been hearing a clicking sound when I hit the brakes. Not a thump or a growl, just a metallic click. I'm wondering if it's the pads or that retaining clip or possibly the ball joints. New brakes & rotors this past fall. I just started hearing it now that I can drive with the windows down. Can't hear or feel anything with the windows up.
So I figured I would crawl under her today and grease up the ball joints, Pittman arm and whatever other grease fittings I see. Well, I don't see any? I have a few on my 7.3L's but I don't see any on the front end of my 6.0L.
View 14 Replies
The visor suddenly made a clicking sound while I was lowering it and stays in the lowered position. The mechanism holding the visor up has apparently broken inside the visor. What is needed to remove and replace this under-engineered part?
View 20 Replies
So when I turn and am hard on the gas I get a clicking and slight clunking sound from the front end. Wants to confirm its the CV joints before I rip it apart?
View 6 Replies
Where the flashers are located? I turned my turn signals on to find the clicking sound, but I couldn't see anything under the dash.
View 9 Replies
AC does not work on Sonata 2006. It blows hot air.
1. Freon pressure is high level in red and I didn't add any new freon.
2. Checked fuse 7 A/Con and 19 A/C Relay and both are OK.
When I click on AC on/off green light on AC panel the light is lit but I don't hear any loud clicking sound.
View 3 Replies
M/T 2010 Sonata. I'm just out of warranty at 102,000 mi. No issues before with clutch. I noticed a clicking or crunching sound when pushing the clutch pedal down. I took a gander and noticed the pedal was traveling farther than it used to because there were indentations in the carpet. So this happens for about 3 days. Then I start the car and cant get it into gear. If I shut it off, it easily goes into gear and I can drive. Usually it is ok after that point but is getting worse. Mechanic briefly tried to bleed it but the pedal stayed on the floor. He was able to get it to its original problem but said if he replaces the master & slave cyl then might as well do a new clutch. Because I had no slippage, no pedal issues or anything prior to clicking. Is 102k miles and 6 years usual time for these components to fail?
View 2 Replies
My 2007 Hyundai Sonata has a knocking sound when I put my foot on the brakes. It has 82,000 miles. It still has the 100,000 mile warranty. The brake shoes was replaced last year. Does it need new shocks?
View 2 Replies
I am getting a ticking sound when i am slowing down (applying my brakes) at say 35/30mph. The sound stops when I stop. This problem starts after my car warms up; doesn't do it when I first start up.
I've taken the car to 2 Hyundai dealerships and a certified mechanic and the problem continues. I first noticed this about a month ago.
So far no one seems to be able to find the problem. The mechanic did try by replacing the front brake pads. He said something about a "shims piece " and thought if we replace the front pads that would take care of the problem. The rear brakes or ok.
I'm still having the problem and I wonder if it's the rear brakes after all. I don't know what I can try now. Someone suggested going to Brake Check. I have about 1000 miles left on the original warranty.
View 1 Replies
2006 Sonata V6. Front brakes only squeal when applying them while in reverse. Happens all the time......cold/warm start, cool/hot weather, dry/humid air. Squeal is extremely loud. I have searched and found similar but nothing exactly like this. Pads and rotors are fairly new and I have removed them and reinstalled and regreased twice. I am using ceramic pads and have never used them before. Is this common with them?
View 8 Replies
I took my 2010 Sonata GLS (86K miles) into the shop last Thursday for an alignment and new front brakes since the old ones were on the wear indicators and doing some squealing/squeaking on soft left turns. Got a call from the mechanic who said the rotors were also shot, so I had them replaced as well.
On my normal commute on Monday and Tuesday this week (approx 10 miles, 95% highway), I noticed that when the car was moving at 15mph or less in a straight line both front wheels were making a noticeable high-pitched squeal/squeak, which went away with increased speed and when braking. I figured it might be a break-in issue but when it hadn't improved by yesterday I made an appointment to have the car checked out by the mechanic again today.
Got the car back today and the same sound is still happening, though now it's in the 60mph range and seems to come and go regardless of wheel direction. The mechanic said he took the brakes apart, found no issues but cleaned and lubed everything as a precaution.
I'm starting to wonder if its the bearings that are shot, but the sound hasn't remained constant as I would expect with a bearing issue. All the parts used are under warranty, so the next step I have available here is to have the brakes and rotors replaced.
View 4 Replies
I noticed yesterday a sound, like a grinding sound, *sometimes* as I apply the brakes to stop. I'm at 68k. The noise only happens when the brakes are applied so I suspect there is an issue with my brakes again.
Some BACKGROUND info: At around 60k (or 8 months ago roughly), the front pads were replaced after the brakes were squealing and a pulsating brake pedal when stopping. The pads were replaced by a dealer. In addition, both front/rear rotors were turned at the same time. Rear pads had 40% at the time and were not replaced.
Some weeks later the pulsation came back and I went back again and they machined them again. For this current issue I was thinking about taking the car to someplace local (not a dealer) and getting a free brake evaluation of what is going on.
I'm also concerned that all this machining the dealer did to eliminate the pulsation may have decreased the life of the rotors and perhaps they need replacement now.
View 3 Replies
The ABS and ESC lights (amber) in my 06 Sonata are coming on intermittently.....
The lights just come on while driving....the ESC switch doesnt have any effect.....the brakes seem to work well....then, after several start cycles the lights will go out and all will be well again....then after a few start cycles and while driving they come on again.
I used the code tester from autozone but no codes are stored...they told me that brake codes aren't always accessible with their hand held unit though....
Also, I have noticed that when turning left or right I get a squeaking from the front brakes now and then,...it was doing this before the ABS/ESC light issue though...
View 3 Replies
I bought a brand new 2010 Sonata in April 2010. So far I only have 2500 miles on it. The problems I am having are:
1. When I apply the brakes, there is some vibrating sounds coming...
2. The passenger side front tire does not hold air more than 25-26 psi.. If I raise it to 34 or even 32 psi, it drops down to 26 psi within a week and then stops leaking...
View 9 Replies
Have all kinds of front end knocks and clunks going over bumps and when stepping on the brakes when backing up. Looking to make a parts list to replace everything at once. I see the upper control arm has 2 bushings and a ball joint, the lower control arm has a bunch of bushings and a ball joint. What else should I replace?
View 8 Replies
After driving my 2007 sonata for around 10 minutes, there is a very high pitched squealing sound that is intermittent and stops when the brakes are tapped. I was told it may be due to a "brake sensor"??
View 20 Replies
I have a problem with the steering. Sometimes a clicking noise is coming out from the front left side when I sharply turn the wheels or hit the brake. The car was in a local garage today and they couldn't find the problem. 2 mechanics checked the suspension, cv joint, axle, wheel bearing... also 1 of them driven the car and found nothing. Tomorrow I show them the clip below.
Hyundai Sonata Steering Noise - YouTube ....
What it could be?
View 1 Replies
2007 3GS 350 awd.
While I'm driving my car ( at a rolling speed 5mph-20mph) I get a clicking sound from front driver side when I hit a small bump, stop, and stop and go at a traffic light. Mainly clicking noise when I hit bumps, but when traveling at highway speeds and I hit a bump I do not hear the clicking noise. ITS VERY ANNOYING, and I have never heard this noise after the brutal snow we just got here in MA. Also I should add, I am currently on BC Racing BR type coil overs which I bought brand new and installed in October. Its not clunking like ball joints, or banging like a blown strut mount.
My question; Where to start? Something needs lubrication?
View 9 Replies
