I have started to notice a crunching sound seams to be coming up thru the front wheels only when turning tight corners this seams to be related to outside wear to both front tyres.....
View 7 RepliesI'm hearing a crunching/rattle sound from the front right end of my 2007 B6 Wagon, 3.6L, Auto, Sport Pkg, FWD w/ 45k miles. I'll try to characterize what I'm hearing and when I hear it...
In the morning, when I've driven less than 2-3 miles and I go over a speed bump (i creep over the bumps) I hear what sounds to be like an un-oiled/worn out spring like sound coming from the front right side of the car. I don't think I hear any other sort of noise at all while driving (or if I do, it's very faint and barely noticeable).
After I've driven 25 miles or so at highway speeds (at the end of my daily commute), when I'm around 25 mph (independent of accelerating / decelerating / applying brakes) I hear what sounds to be a metal on plastic-like loose wobbling rattle (great description, right??) coming from the front right end. It gets pretty loud. However, if I go over a speed bump after having driven a good distance...guess what...no "worn out spring sound", just the rattle @ 25mph.
The rattle sound definitely 'peaks' in loudness at 25mph. If I listen carefully, I can hear it at other speeds, but it is less noticeable. I don't feel like I hear it at all at 40+ mph. I'm pretty sure the rattle is rotationally dependent (e.g. the faster wheel turn, the higher frequency of the rattle).
My tires are worn pretty unevenly, so there is a very annoying wobble/hum at all speeds, but I don't think it has to do with the tires. So to recap, it sounds like a rusty spring when going over a speed bump when the car is 'cold'. After driving a long time, no rusty-spring sound going over speed bumps, but I hear a pretty significant rattle around 25mph.
So I got my 2004 Grand Am about 2 months ago and noticed after about a week that the front right tire was low. I put air in it, came back to check it in the morning and it was down again. I had it looked at and was told that the tire was pulling away from the rim because of the rim eroding. He put some bead sealant on it and got rid of the erosion on the rim. Everything was fine. But then about 2 weeks later I started to notice a slight crunch when I went over bumps. Over the past month and a half the sound has gotten progressively worse.
It sounds extra bad when I am making a right turn. My brother put it on a lift, took the tire off, pushing some things around and couldn't figure out the source of the sound. Everyone who drives in the car with me can hear it. Other than that annoying sound the car is beautiful but the sound makes it seem like a junky car and it's not. It doesn't crunch when I break or at high speeds (maybe because I can't hear it). I'd hate to bring it to another mechanic and pay dollars for him to tell me he can't figure out the sound either. The car had it's suspension checked etc.
01 Excursion V10 4x4 230000 miles
When making slow left turns, and sometimes hitting bumps going straight at low speeds 15-35 mph I hear and feel a crunching noise right below the gas pedal floor board area. I;ve had it checked out on a lift plus sitting on the ground and no none can figure out where the crunching (or banging) noise is coming from. Ball joints & tie rods are good, had them checked.
I bought the truck a yr ago and do not know much history of the vehicle. Is does still have the stock wheels, michlin tires and suspension. Ball joints and tie rods were replaced some time ago, not sure when...
My 1998 Forester suddenly began pulsing / crunching sound, from the front brakes. I had just performed full brake inspection 2 weeks before. So I removed the ABS fuse (20 amp), and the problem disappeared. Of course the ABS light is also on now, but I can drive the car. I disconnected the 4 wheel sensors from the car harness, connected an oscilloscope to each, and spun the wheels pretty fast. I get 150 MV peak-to-peak from each sensor. Must I replace the "tone rings", or just wire-brush them? Replacing the rings are a BIG job, and the wheel bearings & seals must be replaced, since they don't survive pulling out the axles from the steering knuckle (front), or strut assembly (rear).
View 3 RepliesJust picked up a used 2009 RX350 and noticed the low beam light output is terrible. Very difficult to see, especially when turning corners. Also have a bit of fogging of the headlight assembly covers which I assume can be cleaned up. What is the easiest way to increase light output?
View 14 RepliesWhen I turn over bumps not on corners I hear nothing lol ..I just changed the tie rods for other reasons and nothing is loose in the front end now..But this sound is from the box of the truck like something is in the box bumping around when turning corners over bumps..Its frustrating and I cant find out what it is..Only happens when turning over bumps ?
View 6 RepliesAs the title suggests, I am getting a crunching noise when I turn left on my 2013 Passat SE. It sometimes occurs when turning right also, but doesn't happen as often as turning left. Hard to describe it any other way. What could be causing this noise?
View 9 RepliesNew owner of a GX 460. Noticed that when driving in the parking garage and turning around the corners, the wheels make screeching noise. the GX 460 is not a very big SUV but it feels like i'm driving a huge truck when trying to turn.
And also need confirmation that during normal driving, the central differential should be disconnected, which means a yellow icon showing on the dial, i.e., a yellow icon that shows a cross in between the four wheels.
for the past few weeks when turning corners the outer rear tyre is skipping as if the diff is locked. was thinking of taking it into the mechanincs and maybe replacing it, but now the problem has gone no skipping when turning. could this be an electrical problem mayb a sensor?
View 8 RepliesDo any of touaregs make weird sounds when turning.
View 3 RepliesMy wifes 04 v6 touareg make noises now like either a computer crunching files or an electrical fire is about to happen?? the weird thing is when i turn off the display on the dash thru the menu it stops making the noise ?? its not loud enough to hear with the stereo on but it is when its off. the sound itself seems to be coming from the center of the display area over the steering wheel.
View 2 RepliesCan override the seatbelt warning sound? It drives everybody in the car crazy!
View 7 RepliesI have a 2004 Santa Fe GLS 3.5L AWD. Months ago I occasionally started noticing a strange sensation when backing up like the wheels were binding. Since it was intermittent I really didn't think too much about it and I don't drive the SF much except during bad weather or on vacation trips. The issue has gotten much worse and happens every time I drive it. This past week it bound up while turning into a tight parking place.
It binds to the point that the vehicle will just stop under normal acceleration. Backing up it does the same thing. When I finally got pulled into the parking place it felt like someone bumped me (I don't remember if this was before or after placing in park). I also feel it when taking very tight switchbacks in the mountains.
So doing research on this I came across the TSB about the Transfer Case Control Module, however after visually inspecting my module I determined it was made in May 2004 so it does not apply to the TSB.
Is it possible my module just went bad? So I am wondering what I should try? Replace the module with a used one (if I can find one) or foot the $300+ bill for a new one. Either way does anything need to be done to program it?
I have a 2013 es 300h.
To make a long story short, i had to have my front bumper replaced in May due to an accident but there was no mechanical damage to the car. They did an alignment to the car just to be safe.
Earlier this week, I'm not sure why I noticed that the steering was a little tight/heavy when turning left or right sometimes. It wasn't a major challenge just a little more strength then when driving straight.
Today, I took the car to the dealer and they ran all of the tests and everything came up fine except there was a code that the hybrid battery had been disconnected during the repair while sitting at the shop which created some sort of code that they cleared. The tech mentioned that this may have created the steering issues since the car may have thought their was low power.
After, I did notice it was a little better but still a little tight at times. I took the car back to the dealer and had the tech drive the car and he said the steering was normal for the car. Are they missing something or is it that I forgot how the car drives?
Dealer put two new tires on the front of my v6 touareg...long story about why....anyway.. Now when I am in reverse pulling out of a parking spot, and I cut the wheel either way... I get this shake that is like the tires are going to fall off.
View 6 RepliesWhen turning left , I felt that there was a shock from front wheels. The service person told me that it was a differential problem and the controller unit is needed to reprogrmmed. Is it true? When my Touareg ran over the bump, I felt that the front suspensions were not adjusted well. Is it normal?
View 2 RepliesI have a 2004 V8 standard suspension Touareg and when I make a turn and turn the wheel all the way to either the right or the left the Touareg feels like the front wheels are skipping and I can feel a shuddering vibration from the steering wheel. I have the Pirellis on it.
I have 6,000 miles
Lexus es 350 steering wheel is heavy/tight when turning?
View 2 RepliesI have a 2006 Jetta with 85k miles on it. When I have the clutch in, going around corners to the left, I hear a very swishy sound that sounds like "wish wish wish wish"...It seems to be coming from the front. It can only be heard with the radio off. This started about a month ago. Seems to be getting gradually worse, but not exponentially.
Couple of details:
1) Recently (3 months ago) started a very break-heavy commute (moved from Boston to LA- had car shipped)
2) Had the breaks redone about a year (20k) miles ago
3) Someone misjudged the angle at which they could pull in to a parking space recently and scraped along the back quarter and tire but i've had it checked out and have been told that the damage is purely cosmetic
4) Recently was going over a speed bump (the wider and softer version known as "speed humps" here in the LA area) and thought i heard a sucking-"POP"...I was hoping this meant the sound would go away, but it didn't.
I just bought a 2003 Hyundai Elantra GLS, yesterday. 167k. Some faded paint on top areas, dead battery & in need of driver's front CV joint axle i believe, clicks when going around corners. Starts without hesitation, no smoke, no ticking, very clean and has only had 1 owner.
View 10 Replies