How do you remove rear turn indicator assembly so bulb can be changed?. Specifically is there another screw besides the two on the end of the assembly. Once the two are removed the assembly is loose but something is still holding the assembly.
View 2 RepliesI can see where there is a 1/4 inch post that if turned will push the assembly out, but i can only get it to come out about 1 inch. Is there something else that has to be released ?
View 2 RepliesHow do you remove and reinstall just the lens in the rear light assembly in 2002 SC430 ? I can see that it probably just snaps out using a screwdriver as a pry tool but want to be sure !
View 5 RepliesTried to remove my rear interior light assembly up on the headliner but just couldn't figure it out. I can pry the clear lens off pretty easy but I want to remove the whole assembly from the headliner so I can put some sound deadner behind it because ever since I upgraded my sound system it rattles like crazy and is driving me nuts. I know guys have dropped the whole headliner to dynamat or sound proof it so someone's gotta know.
View 2 RepliesThe clips on the cover broke so I bought a new one. Since they redesigned the 04 base, I have to remove the base. I remove the nut on the outside and the 3 on the on the inside after removing the cover. However I can't figure out how to pull the wiper off and replace the base. There is something holding it together. There is a pin that is connected to the inside that has a round hole but it is not a torx, allen, or any type of other tool I tried.
View 5 RepliesWhen I towed with my 2005 V-8 Touareg, the speedo displayed an indicator (like this - ) when the turn signals were actuated. I now have a 2009 TDI. The brake controller has just been installed and the turn signals work fine but no display.
View 6 RepliesHow are you going to remove the chrome strip on the rear bumper. Mine got damaged and I need to replace them with a new one.
View 5 RepliesI have a 2016 Camry SE.
How do I pull out the map light assembly? The whole thing not just the bulb covers.
I tried pulling from the rear but it won't budge and created a crease in my headliner.
Is there a certain way to pull it down? I don't want to damage the headliner anymore since it's not even a week old yet.
I'm doing an install on my son's 2000 passat V6 30 valve.
I have the front rad pulled out and there is plenty of room to work. How do I get off the viscous fan assembly. I removed the fan's 3-4 allen bolts, I now need to get the assembly out. I also removed one of the long allen bolts in the actual assembly. I have the fan ribbed pulley secured with an old serp belt and grip wrench. I am trying to losen the large nut behind he fan assembly. I have attached a photo to point of reference. I may have a manual next week yhat may explain all this.
my wife came home today and said that the left rear turn indicator and the right headlight were out on her 2010 tiguan se. Well, upon further inspection I noticed that there is more to it than that. The following lights are out;
drivers side city light
passenger side headlight
passenger side fog light
passenger side turn signal (front)
right rear running light (not the one on the lift gate) inner bulb
running light on the left side of the lift gate
left rear turn indicator
left rear running light (not the one on the lift gate) outer bulb
What are the steps to remove the left side vent assembly? The hinge is broken on my wooden cover and poking around I can't seem to get the whole vent assembly out.
View 2 Replies2008 Wagin .... Specifically, how do I remove the reflector plate that hides the bolt?
View 3 Repliesi have camry 2000 xle and my problem is rear light indicator turn on although all rear light work ok.
View 2 RepliesHow to reconnect the wiring assembly that controls the right front passenger air vent?
I noticed that very little air came out of the vent when riding shotjun and thought it might be because the vent was open in the glove box. The vent pops right out and I saw that the cable was not connected to the vent, as it should be?
I was driving the other day and the lens on the turnlight assembly apparently fell off. I've ordered a replacement assembly and I'm planning on trying to replace it tonight. How to get the assembly out and how to install the new one.
1998 Passat GLS 1.8T ....
I'm replacing the rear hub/bearing assembly on my 2010 Prius. It seems pretty straight forward. What is the correct torque for the 4 bolts holding it on? Also what is the correct torque for the 2 bolts holding the rear brake caliper on?
View 4 RepliesI need to replace the hub assembly on the rear drivers side of my 2005 Avalon touring. I just need to know if the hub is pressed into the bracket that it is bolted to with 4 bolts or not. I would prefer it be the latter but I just want to know what to do with it. I took it all apart but decided to put it back together once a saw the back end of it seemed to be pressed into the bracket. Maybe it's not, I just need to know how to get the original off and get the new one on.
View 2 RepliesI just got a 2000 F350 cc drw 7.3l.
I did search but have had no luck. My turn signals do not work, unless my foot is on the brake pedal my green arrow indicator wont even turn on. When they do my bulbs work but don't cycle so I know all the bulbs are good as I had my wife check all four corners when I got them to come on for a split second. I have tried replacing the MFS and the turn signal relay under the radio in the dash.... When I do turn on my blinkers I can hear the relay click once but that is it, no more.
I tried checking the wiring in the column and tilting the column to its extremes while trying to engage the turn signals. Also, if I unplug the brake light switch then I do not get an arrow on the IC to light up so I am guessing the power flows through that switch. I don't have a chilton manual yet and the owners manual was not in the truck. I did check fuse 23 ?
My passsenger side rear wheel hub assembly needs replacing and I am having trouble removing it. I have removed the rotor, the 4 bolts holding the hub, applied generous amounts of pb blaster, and struck it vigorously with a 3 pound hammer. Also, how to release the abs connection.
View 5 RepliesEvery so often my rear cargo door handle is impossible to open. I can hear the lock mechanism lock/unlock but the handle won't compress to open the door. I had a mechanic get in it the other day by removing the inside panel. He states I need a new cable assembly. I have ordered one using our discount from Sewell. I have since come across a TSB about the actuator being an issue. I'm assuming my mechanic would know the difference. He said the cable is stretched and it makes the handle travel too far to engage. I'll try the cable at $35 delivered before the whole mechanism for $250 delivered.
View 8 RepliesMy Touareg has Daytime running lights, and they are functioning, however the DRL indicator is not illuminated. Is it supposed to be illuminated all the time or only when the DRL malfunctions? If it is supposed to be on all the time, could it be a VAG-COM adjustable issue? The DLR in the instrument cluster never comes on, not even during start-up.
View 2 Replies