Yaris/Scion & Vitz :: Car Making Hum Every Time On Turning With 1/4 Turn Of Steering Wheel


Mar 2, 2016

For the last few months, I have been chasing down steering problems. Alignment, end links, ball joints... and now, humming. Every time I take a turn that requires more than 1/4 turn of the steering wheel, the car hums. It wasn't very noticeable at first, but over the last week it has gotten much louder.

I have topped off my PS fluid and replaced my belts, but this has not solved the issue. Before I start replacing a pump and/or a steering rack.

View 3 Replies

Advertisement

Yaris/Scion & Vitz :: 2009 - Steering Wheel Jerked To Left While Doing 60-65 Mph

Why would my 2009 Yaris suddenly jerk to the left while doing 60-65 mph? It would jerk hard only once, but did it 3 times within a few minutes tonight and once earlier today.

View 1 Replies

Yaris/Scion & Vitz :: 2003 Echo - Steering Wheel Vibration Gets Serious Around 60 Mph

My wife's 2003 Echo has had some persistent issues. We've replaced the right front wheel bearing 3 times now, and the driver side front once.

The current issue is steering wheel vibration. It's hardly noticeable at 40mph, but gets serious around 60mph.

Some things I noticed when I took it for a spin today:

The right front wheel makes a clunk-squeak sort of sound on rough road. It has a looser feel at those times. Sort of like an old truck. Not a peep out of the driver's side.

The steering wheel vibration is not changed by shifting to neutral (it's an automatic). The vibration increases with speed, and is rougher at 50mph coming down on a coast from 60 than it is accelerating up from 40.

The vibration is reduced with slight braking and stops with heavy braking. In turns where the weight of the car is shifted to the right side, the vibration is reduced or stops. When the weight is shifted to the left (driver) side, there is no effect or it gets worse.

Uphill seems to be worse than downhill.

The car does not drift to either side when the steering wheel is released when not vibrating, and doesn't have much wander even with the wheel vibrating.

It does not clunk or squeal when turning or braking.

The mileage is 115k.

View 3 Replies

Yaris/Scion & Vitz :: Suspension Noise When Turn The Wheel At Low Speed

In my 2001 Toyota Echo I have a noise in my suspension but I don't know where it is coming from. I made a video of me pushing down on the hood to produce the noise. I notice it when i turn the wheel at low speed, or even just driving at low speed. There is enough power steering fluid. The sound is a groaning, kind of like a rusty hinge.

Video with suspension noise ....

Suspension pics ....

View 3 Replies

Yaris/Scion & Vitz :: Noise Out Of The Front Right Wheel Area When Make Hard Left Turn

Basically, when I make a hard left turn I hear a noise out of the front right wheel area. I do not hear anything in any other condition. It sounds like something rubbing up against something else. I know that my rims are in good shape - is this an outer or inner bearing issue? Or is this something completely different?

View 2 Replies

Yaris/Scion & Vitz :: 2001 Echo Airbag Light Never Comes On And Is Off All The Time

I recently noticed that the airbag light of my 2001 Echo never comes on and is off all the time.

What can be the reason? Is the fuse blown?

If the fuse is blown, shouldn't there be an alarm or warning indication? I mean, because airbag is a the main safely feature in a car, shouldn't there be a warning mechanism to simply indicate that it does not work at all?

BTW, can a battery change have caused this? I changed the battery a while ago but never noticed this issue until now.

View 1 Replies

Yaris/Scion & Vitz :: 2005 - Time To Change Brake Fluid

I have 2005 ECHO with 117000 km on it. I would like to know when is the time to change brake fluid. I did some research in TOYOTA web-sites but nobody mentioned it.

View 3 Replies

Yaris/Scion & Vitz :: Grinding Noise When Turning Left?

Yesterday I replaced what I thought was a bad front passenger wheel bearing, I removed the hub myself and took the hub to a local dealer to press out the old bearing and press in the new one.

Took the part back to the shop, got everything all assembled and took it out for a test drive. Right away I notice I still here the same noise, possibly even worse then before.

It was already late in the day so I decided to clean up and call it a day. During my trip home I notice everytime I turned the wheel to the left I here a horrible grinding noise, I did not have this sound before changing the wheel bearing.

Second guessing my own work, I took the car to the mechanic down the road today, not the same place that pressed the new bearing in. The mechanic inspected my work and couldn't find any problems at all. Even the ball joint I thought I had ruined was fine.

He inspected both from wheels for play, no play in either wheel. He then put the car up on the hoist while I remained in the car turning the wheel and accelerating. We were not able to reproduce the sound with the vehicle on the hoist, even with his stethoscope he could not here any noise coming from bearings on either front wheel. Everything sounds great with the car in the air, it's just when it's on the ground when there are problems.

Rotated all tire just to make sure it wasn't an oddly loud broken tire belt, once again no change.

I did replace the stabilizer link kit as well since the old one broke while during the wheel bearing replacement. Is there anyway I could have done something wrong with the stabilizer link that could cause this noise? I doubt this is the case since the mechanic did have a look at it.

I'm still assuming it's the front passenger wheel bearing, but don't wan't to go replacing parts I don't need. (I put a new fuel pump in my TJ 2 weeks ago only to discover all I really needed to repair was the broken wire going to the pump )

So just to be clear my car only makes this noise when it is on the ground, when the car is in the hoist I can turn the wheel and accelerate without any noise.

View 8 Replies

Yaris/Scion & Vitz :: 2010 - Radio Screen Going Blank Or Just Turning Off By Itself

My daughters factory radio has issues with the screen going blank or just turning off by itself. Sometimes the radio still plays but sometimes it has to be turned off and back on.

View 1 Replies

Yaris/Scion & Vitz :: 2001 Toyota Echo Overheated When Idling For Extended Time With AC On

Twice now my 2001 Echo has overheated when I was sitting and idling it for an extended time with the air conditioner running. The temperature outside was in the nineties. I'm not sure if that makes a difference. After I let it cool down the first time added coolant and drove it, it didn't happen again until today months later. Is this normal?

View 4 Replies

Yaris/Scion & Vitz :: Wheel Bearing Noise / Vibration On The Front Left (driver Side) Wheel

So on my girlfriends 2000 echo I get the classic bad wheel bearing noise/vibration on the front left (driver side) wheel. Worsens under load (right turn) and goes away when unloaded (left turn). I've replaced left side bearing, CV axle, brake rotors/pads and the noise still persists. My next thought is maybe the ball joint but humming/vibration tells me something out of rotational balance. Bearing in the transmission? I don't know. I'm stuck.

View 5 Replies

Yaris/Scion & Vitz :: 2005 Echo Making Light Click Sound When Release The Brake

I just bought this car, had front brakes put on, rotors. I have noticed with stop and go in traffic that the engine revs and I have to hold the car back. Also when I release the brake there is like a light click or thump. Sometimes it makes the small sound when I put the brake on.

View 1 Replies

Yaris/Scion & Vitz :: 2001 Toyota Echo - Output Shaft Bearing Making Noise

I have a 2001 Toyota echo 2001 210.200 km and my output shaft bearing makes noise and I cant know the level of my transmission fluid bcoz I don't have dipstick and i bought trans 75w90 oil os that ok and how can I add this?

View 1 Replies

Yaris/Scion & Vitz :: 2004 Echo - Grinding Noise While Turning At Low Speeds

I have a 2004 Echo with the 5 speed manual. Everything is factory original on this car except the tires. (159,000 km). While turning hard to the right at low speeds or pulling away from a stop and turning right, I get a harsh grinding/scraping noise and it seems to be coming from the drivers front wheel. If it was a CV joint, or wheel bearing, wouldn't it make noise all the time?

View 3 Replies

Yaris/Scion & Vitz :: 2000 Echo - Audio Static For About 10-12 Seconds Every Time Engine Turned On

For about the last 6 months or so I get a audio static for about 10-12 seconds every time I turn on the engine. Ditto after I turn off. I am using factory speakers, the head unit was replaced by previous owner. There has been no issue with the audio other than this one. I do live in an extreme weather area: +35C to -40C, but I don't think that should have anything to do with this. Is this a bad ground issue? In that case where do I find the ground cable and how to properly make the ground connection? Or is this something else?

View 2 Replies

Yaris/Scion & Vitz :: Scrapping Noise When Wheel Turned To Right

When I turn my wheel to the right, there is a scraping noise. Like, metal on metal. The more I turn, the more intense the sound. Does not affect driving performance, but it does sound problematic. As I turn the wheel, it starts making a scrape-scrape-scrape noise. It sounds like it could be a shield or wheel bearing, but I'm really not sure.

View 1 Replies

Yaris/Scion & Vitz :: 2000 Echo Won't Turn Over After Battery Down

The lights were left on and ran battery down. Tried to jump start but would not start. Installed new battery, won't start, won't turn over, no click, nothing. Lights and dash board lights work. Changed starter relay, checked/changed fuses, took starter out and tested it 4 times at Autozone. Starter is good. Checked switch under clutch, it's good. Checked ignition with voltmeter, checks good. Checked fusable links with voltmeter. Checks good. Why won't this car start! I can push it off and it runs fine, that's how I got it home. I'm getting 12 volts to the starter.

View 5 Replies

Yaris/Scion & Vitz :: Changing Drive And Power Steering Belts?

info on changing the drive and power steering belts. I recently changed them on a 2003 Echo and took some pictures.

There are 2 belts on the Echo engine. A drive belt and a power steering belt. In order to remove the power steering belt you must, first, remove the main drive belt. If changing one it may be best to change both.

First remove right front wheel. Use jack stands to support the vehicle. Do not rely on a jack to hold it up. Next remove the passenger side front bumper cover. I feel it best to remove the cover as then you can do a test drive before enclosing everything. You can, if you wish, just lower cover to give access to the drive belts. With the cover removed, check the power steering pulley and make sure that you have access to the adjusting bolt. This bolt is accessed thru an opening in the pulley. See last picture.

Here are 2 pictures of the bumper cover installed and removed.

View 14 Replies

Yaris/Scion & Vitz :: Starter Motor Not Disengaging When Turn Ignition On

I have a 2010 Yaris 1.3 motor. Sometimes when I turn the ignition on it seems to keep wanting to start?

meaning it sounds like the starter motor isn't disengaging when the motor turns over, its been back to teh dealer twice now, someone suggested a relay?

I am taking it back again tonight for the auto sparkie to look at. The last time it did this I had to manually turn the car off to stop it turning over.

View 1 Replies

Yaris/Scion & Vitz :: Driver Door Won't Turn On The Dome Light

So I left my lights on because there was no warning buzzer to tell me so. This happened once before when the driver door would not turn on the dome light. I went for the door switch and it was bent. Bent it back and buzzer worked and dome light worked.This time nothing. Switch is ok. traced wire from switch and it is ok.

2000 Echo stickshift.

View 2 Replies

Yaris/Scion & Vitz :: 2011- When Reverse Steering Jams Then Vibrate And Engine Off

This happens many times especially when I am parking parallel and need to take reverse frequently. The steering kind of jams, then vibrates and then the car engine is off. I need to restart every time this happens. This is causing fear to drive the car on highways.

View 5 Replies





Copyrights 2005-15 www.bigresource.org, All rights reserved