My 14 year old Jetta, 119,000 mile will manually o into reverse ,but will not allow me to reverse the car? Could this be a clutch problem, or transmission. Is it worth repairing it, or purchasing, leasing car? Car also had new engine 3 years ago.
View 1 RepliesI have a 2011 Jetta 5 spd, was driving today and suddenly I could not shift in 4th, 5th or reverse. This is the first time this as happen, I have never had any issues with the far. I don't know much about transmissions. The clutch seems to be working fine as I can shift with ease from 1st, 2nd, and 3rd.
View 3 RepliesI have a 2010 RX and I've recently noticed every time I shift from Drive to Reverse and vice versa there's a squeaking noise coming from the shift stick. What this could be and if there's an easy solution?
I'm not due for service or an oil change for another 5,000 miles so I'm hoping it's not something I need to address immediately. Do you think it would be safe to wait until then?
How to remove the stick shift knob on a 5 speed 99 passat .
View 3 RepliesI have a 97 jetta trek that is having problems. Grinding noises from transfer , no reverse, hard to shift, loud winding noise. I think it's may be the trough out baring thing from what I'm reading.
View 6 Replies93000 miles 5 speed manual transmission only lets me use 2,3 and reverse gear. I took good care of that car and dont think transmission should go out that soon/
View 7 RepliesLong time listener first time poster. My wife has a 2009 Vw jetta 2.5 with a manual transmission that is very hard to shift. It has 80,000 on it and has had the clutch replaced once. She told me that she never had any problems shifting until she let it sit for two weeks while she went to cape cod. I have driven it myself and can confirm that there is an issue. Sometimes it just will not go into gear. No grinding noise at all and very very stiff when moving the stick shift laterally from first to fifth. Not actually shifting from 1-5 just moving the stick across the range it feels like cement. I have already changed the transmission fluid and used the Vw oem oil. I also removed the shift boot and lubed all the moving parts with a high quality grease. Tomorrow I am going to bleed the clutch slave and have a good look at the shift linkage. Is their something I am missing?
View 5 RepliesI bought a used VW 1.8T with Tiptronic Transmission ~88,500 miles, so I don't know what is normal and what I should be concerned with (I'm a stick shift person, bought this to be the family car). I particularly notice what seems to be a delayed shift when going up hill RPMs go up to ~4k before the shift. Is this a late shift?I've been reading a fair bit of online fora about the need to change the ATF + filter + clean the pan every 30-40k.
View 2 RepliesI have the above referenced car with about 65k miles on it. Today I took it for a drive, switched it to tip-tronic manual and found that the car would not shift past 3rd gear. When I switched to automatic, the transmission stayed on tip-tronic (the display indicated I was on 3rd gear). I had to fully stop the car, place it on park and only then did the transmission switch to automatic.
View 1 RepliesI went on vacation for a week and left my car at my parents house. I came back and now it has become extremely difficult to shift between gears. It's nearly impossible to get the car into reverse, extremely difficult to get it into first, makes a thud when pulling it out of first, is semi difficult to get into 2nd, but only a mild nuisance to get into 3rd through 6th.
For more information, the car is a 2012 Volkswagen GLI with just shy of 40,000 miles. The car ran just fine before I went on vacation and the car was not moved while I was on vacation. I did notice that a little ticking kind of sound when I had the car in neutral with no clutch. So the throw out bearing was starting to wear, but it was a very slight. But I haven't had any other problems.
Over the past few weeks, my car (2002 Golf 2.0L) has gotten really hard to shift into 1st and reverse (has crunched once or twice), but only when the car is hot, after driving it for a little while. When this happens, and I try to shift into reverse, the shifter feels really "sticky" and can get kind of stuck in the depressed position near reverse.
I bled the hydraulic system and replaced the slave cylinder, but no dice. I haven't noticed any clutch slipping. Shop wants to replace the whole clutch. Is this the right answer?
When you sit in the car and put it in reverse it wont go in.
If you stick your hand in the engine compartment, push down on the golf club looking linkage and shift it into reverse it goes right in and you are able to back up the car.
So my question is which linkage may need fixing or replacing or adjustment. The shifter linkage in the car? the linkage on the golf club thing or any parts in between.
Bought a 2003 golf gti 1.8t as kind of a project. Car had no interior no exhaust and some shifting issues. To fix the shifting issues rather than replacing solenoids I just got a rebuilt valve body. After installation the car still doesn't shift from 1st to second properly and now I don't have reverse. (It's an 09a transmission)
View 1 RepliesI got into my 1998 Saturn SL2 (Gold) and the stick shift was entirely loose. It is like the stick is no longer connected to anything. What the problem is and how much it might cost to fix? Keep in mind, the car has almost 230K miles on it.
View 1 RepliesQuick question, on the R32 manual shifter, is there a way to get the shifter to reverse by pulling the stick back instead of pushing forward for an up shift?
I have an E46 M3 w/ SMG which shifts this way and I am strongly considering an R32. It would be nice to reverse the shift pattern to stick w/ what I am used to.
So i have this Porsche and is been passed down and how to fix it like battery and everything is nice i mean I'll work on engine next but the actual stick that changes gears can actually pop out and i mean i can still change gears it's just is there a way to make the stick stay in there.
View 7 RepliesMy 2002 mini 6-speed stick licks to get stuck in the I park it in when its cold. After driving in that gear for 4 minutes it warms up and let's loose.
View 2 RepliesI have a 2009 3.3L santa fe integral transmission and for the second time they have a really bad shacking in the steering wheel and in the stick shift when I'm on the road the same thing like your drive on the side road bump to wake you up. I stop two times on the side of the road to find if they have anything abnormal but with no resolute.
My oils are all ok and no loss of performance of the car except they consume a little bit more gas (around 10L/100Km. The last time this happened the arm shifter vibrated.
about a week ago, I noticed my stick shift sitting a little lower than normal, and now I have to actually engage clutch, then pull upward on the stick shift before I can shift gears without a problem, if I do not pull up, the car just won't shift.
View 9 Replies"my Honda accord 98, is stick shift and recently it has been rattleting a bit when I switch to speed one. if I don't push the clutch it shakes and wants to almost turn off."
View 12 RepliesWhen driving, a pin fell out of the shifter arm under the car and now the shift stick is extremely loose and, although it will go into gear, it is almost undriveable. I have reinserted a pin, but the stick shift is still loose. I gave it a test drive and I drove about 10 feet in first gear, but when I put it into reverse, the car continues to move forward.
View 7 Replies