Nissan - Altima :: Shaky Steering Wheel Most Noticeable At Slow Speeds
Oct 30, 2013
This summer I replaced the inner and outer tie rod ends on a 97 Nissan Altima, had a bent wheel replaced, and had an alignment done. Everything worked smoothly for the last 5,000 or so miles. I had my tires rotated and balanced recently which created a new problem, a shaky steering wheel most noticeable at slow speeds. I've had a similar problem before and had it fixed by balancing the tires. I took it back in to have them rebalanced, thinking they may have forgotten to do it the first time. They rebalanced them and the problem has not changed at all.
View 3 Replies
Advertisement
Got an issues with my 02 Santa Fe. Shaky steering wheel at all speeds during straight driving more than in turns. 130k miles on the vehicle.
The tires are worn, and need replacing. No missing wheel weights that I saw. No issues with braking.
At slow speeds it feels like the front end is swaying back and forth. I am planning to have the tires replaced, but I feel that this is more than just the tires.
I suspect ball joints / tie rods are the culprit. Is there a good way to check these components from home verses going to a shop and having them diagnose the issue.
With ball joints / tie rods, I am confident that I can change them on my own.
View 2 Replies
I bought 2012 Prius ii around 6 weeks ago. From day one I started noticing vibrations in the steering wheel most noticeable at highway speeds. I can describe this as high frequency vibrations that become very very annoying especially if you drive to work for an hour every day. This car has OEM Bridgestone Ecopia EP 20 tires. I took the car to the dealership twice already, they balanced the tires twice and road force tested it twice. They replaced front tires for me because based on the test results one tire was at 16 lb the other one at 19 lbs.
The new tires are at 8 and 10. They keep on telling me that this is by design and is a characteristic of the vehicle. However the Prius I test drove when I was buying it did not have this problem, otherwise I would never buy it. This vibration happens in any mode and I can even feel it at lower speed now though it is not as noticeable. I had a few people including Prius owners drive my car and everyone feels the vibration. With so many Prius models sold I highly doubt that everyone just accepts it as a feature.
View 19 Replies
I drive a 1999 Nissan Altima GXE and when i turn the a/c on or turn my steering wheel the car makes a rattling noise towards the belt. I have replaced the belt and i check all the electrical components that are runned on that belt. But i cant figure it out. I think its something to do with my pulley system because my power steering/ac are runned on the same belt along with my alternator and other components. What to check.
View 7 Replies
I have recently noticed that if I am driving at speeds above 40 mph and apply the brakes, the car (including the steering wheel) seems to buck/shake. I've learned to ease off the gas and let the speed drop before applying the brakes-- this seems to work, but I'm concerned about what is going on. This is an '07 Nissan Versa...
View 7 Replies
2007 camry le with 85k miles, there is a bad vibration in the front end, the steering wheel rocks, and when you turn right or left at slow speeds there is one knock, not a clicking, just one knock, also noticed the front driver side wheel has heavy wear on the outside corner of the tire, cv joint, bearings...
View 3 Replies
During the past couple of months, I've noticed a moaning when I turn the steering wheel at slow speeds, mainly while driving in parking lots. When I turn the A/C off, the sound disappears. Is my compressor on its way out? The dealer replaced a leaky condenser in 2011. My fear is that they didn't replace it properly with adding oil back to the system.
View 1 Replies
2008 F-350 ... Getting a click in the steering wheel. Slow speeds in parking lots. Even with the truck off you can manually move the wheel and notice it has play. Maybe 1/16" - 1/8" of play
Read a few old posts saying there was an TSB on it TSB 05-15-1 ... Couple of the posts say they replaced the steering column. Wanted some input before I pull this apart. It's more annoying than anything ..
View 1 Replies
I have a 2000 Suburban with about 170,000 miles on it. I'm getting an audible clicking sound at slow speeds which increases as the vehicle speeds up and also a fairly severe vibration which becomes noticeable at about 20 mph and becomes worse as the speed increases. I thought maybe driveshaft but things seem fairly tight. Also, this has gotten gradually worse over time.
Ok I figured out where the vibration was coming from...U joints in the front driveshaft are shot. Now I have another problem...I've removed the fwd u joint straps and according to the book, the driveshaft should simply slide to the rear into the transfer case so I can lower the fwd u joint but the problem is that the part of the shaft (which slides into and out of the transfer case) seems to be frozen/stuck. Do I simply beat on it with a hammer to break it loose or am I doing something wrong?
View 5 Replies
Had the shaky steering wheel @ 50-65 MPH. I remember this happened to my other car after the brakes were inspected. The tech put the rim on without cross tightening the lug nuts.
Anyway I took off the wheel and noticed the brake rotor was not lined up with lug bolts. In other words the bolts were not centered on the holes of the brake rotor. So I broke the rotor free and lined up the holes. Put the wheel back on and now no shakes at 50MPH. I do get just a little of shake on braking at high speed but thats all.
I think the rotor can get stuck on the edge of the bore and not able to seat firmly on the spindle.
View 14 Replies
Here is a weird issue on a 07 Nissan Altima. Just recently, the air conditioning started blowing weak when I hit highway speeds (around 60+). It still blows cold..., but is very faint no matter what speed the blower is on. I can still hear the blower cranking away, but very little air coming out of the vents. If i turn the a/c button off...it takes a little bit, like 20 seconds, but the air starts blowing through the vents again. Wait a bit and hit the a/c button and blammo - a/c. It lasts for about 10 minutes and happens all over again. Only at high speeds. at low speeds, everything works like a champ.
View 5 Replies
Just threw some steelies on my car for winter mode. I was told they were in balance but I'm having a weird issue.
Steering wheel shakes when you approach 60+, but with varying severity. It will shake hard one minute, and then soft the next.
I also found that stepping on the gas makes it shake, and letting off the gas (coasting down) makes it stop.
Is this an issue with the wheels, or something in my drivetrain. I never really noticed it with the RC's.
View 13 Replies
I have a Nissan '04 Altima. Last winter, in temps near zero, my power steering seemed to go out. It worked fine when it got a little warmer. Figured maybe a stuck valve or something on the pump. Works fine sometimes and sometimes it doesn't. Asked my mechanic to check this out when I went in for my last oil change. Not sure they checked anything (it was working when I brought it in) they recommended a fluid flush. Did the fluid flush, it continued to work for a few days, then stopped working again. What could cause this so I can have them check specific components. And so I don't spend money on things that I don't need to.
View 2 Replies
2011 Camry LE with what I would call a mushy or sloppy feel to the steering. It is most noticeable at freeway speeds and requires an almost constant driver input to maintain the car in my lane with slight corrections back and forth right and left. This is fatiguing on long drives. It feels like there is too much power steering assist at higher speeds, although an independent mechanic said he didn't think it has variable assist power steering. There is no pulling in one direction. Alignment has been checked and it's ok, and tires are balanced and properly inflated.
Strong wind or large trucks passing me cause me to struggle to maintain the car in it's lane. Toyota dealer mechanics and the Toyota rep checked it and gave me the "drives as designed" answer and that there is nothing wrong with it. I had an independent mechanic look it over and he said there is nothing wrong and that there is nothing that can be done to change the feel of the steering. It is hydraulic steering and not the electronic power steering. I have test driven other Camrys as well as Corollas and other makes of cars and they all drive with a more sure feel to the steering and I just want my Camry to drive like that.
View 4 Replies
I have my 2005 F-250 6.0L Powerstroke. Thing is, I have this issue where when I turn the wheel at a dead stop or at low speeds. I get this weird feedback in my steering wheel of a shaky vibration, like it's skipping. And frankly, feels like the whole cab is shaking. I've replaced the power steering pump, and tightened the steering box. What could it be?
View 4 Replies
I went to a big box store to have new tires put on the rear of my 2002 Nissan Altima. They told me I had a stud broken from the inside of the wheel. The lug nut is still attached, and they can't get the wheel off. Both the stud and the nut turn freely within the socket. Is there any way to get this off without having to pay the $70 a tire place will charge me to fix it? I don't know how long its been like this. I currently have three new tires and one old.
View 2 Replies
I had new tires put on my 2011 Altima around 35,000 miles. I started noticing a hum, so I checked the mechanic notes and they said I had a bent right rear rim. So, I had them replace it immediately. The hum (which only happens specifically at 40mph and at 75 mph) remained so I attributed it to new tires and breaking in.
I took my car to a shop around 45k miles for a check engine light, which ended up being an ECM issue that required a dealer service. I also had him check the tires as the hum was still there. He just rotated the tires and sent me on my way. This is when the steering column started shaking, so I had the dealer check it out and they told me I had a bent rim! Go figure, I've been driving on this thing for about 10k miles.
So, I ordered a new rim and had a local tire place put it on and they showed me the bent rim. Now I thought this would solve things but I was wrong . I still fee the vibration in the steering column at high speeds and the annoying wah hum is still there.
I'm a little lost as to what the problem could be so I'm looking for some insight? Should I start with having the other 3 tires balanced? Could it be that the bent rim caused uneven wearing on my tires over the 10k miles and it may take time to even out? There's no noticeable wear on the tires to my seeing but I could be wrong. These tires are 50k mile tires. Could the bent rim have caused other unseen damage? Keep in mind the wheel they replaced is now on the rear.
I know another cause of shaking could be the rotors but as far as I know they're in good shape and breaking is still smooth. so if they were the issue causing vibration at high speeds I would surely feel it in the breaks.
View 19 Replies
I THINK my wheel bearings are going on my 2003 Nissan Altima. It has about 95k miles on it and it has been making what I would call a mid-toned rumble or a low pitched rattle (imagine shaking a metal box full of rocks). The noise is coming from the front driver's side. It's more subdued when driving in really wet weather. I am more aware of it when I drive at slower speeds. It doesn't seem to change when I turn the wheel either way, and it definitely gets more pronounced when I go over a bump or a rough patch. I recently had my front rotors and pads replaced, naiively hoped that might fix it - wishful thinking - and stupidly forgot to ask my mechanic about it then. I need to call to schedule a repair, but I would like to be prepared and to know if anything else might make this noise. (and I don't want to jack it up and shake the wheel or anything).Approximately how much does it cost to have this fixed?
View 3 Replies
It's Nissan Altima 97. My friend need to take her road test so I let her borrow my car this weekend to do some road practice (I was in the car with her). Besides all the heavy braking, and sudden acceleration. She did alright. Because she is from VT, so she was practicing this VT Turn Around (I have never heard of it before today). She turn the wheel all the way to the right and back up.
I heard a small popping noise, and didn't pay too much attention to it at that moment. However, After she finish that VT Turn Around, we started to driving down the hill, and heard this metal-on-metal noise. It lasted for 10 ft, then went away. The noise is coming from my driver side front wheel. When I got off the car, I found the center of the wheel cover pop off.
(see this link for the pictures) [URL] .......
Now here are my questions. What just happened? and do I need to get it look at immediately, or can I wait until the next oil change?
View 9 Replies
I've got this 02 Nissan Altima 126,000 miles. I did a front brake job on my self, new rotors and ceramic pads. Immediately after the brake job, I started hearing this horrible grinding noise when weight is shifted to the driver side. It happens when I take apply the brakes or make a right turn. When making a right turn I don't need to apply brakes to hear it. I can sometimes hear it faintly when driving normally.
I took it to my mechanic. He first inspected my brake job, disassembled the rotors and pads, applied brake grease, and reassembled everything. The problem continued. He lifted the car, and had me get in, put it in gear, accelerate, then applied brake, no noise. There is no sign of anything rubbing or grinding in the wheel assembly.
After inspecting the tie rods ends, he replaced the inner and outer on both sides. No Luck. He then replace the ceramic brake pads with regular pads which has reduced the noise but it is still there. I asked around and two other mechanics have suggested the wheel bearings, my mechanic believes this is unlikely.
View 1 Replies
Question: after replacing rear shocks on 2009 Altima, does in need a rear wheel alignment? After shocks were replaced on my Altima (without wheel alignment), I drove about 4500 miles. After that the tires were rotated and the back tires installed in front. I immediately noticed loud road noise, mechanic says it is uneven tread wear and I think - this is too much of a coincidence. So should they have done the alignment when they replaced the rear shock absorbers or not?
View 6 Replies
