My son just bought a 09 Corolla LE and he gets this clicking noise every time the brakes are applied. The clicking noise comes from the Shifter.
I know that about the Shift Lock Solenoid, but this clicking sound is loud. I have been told that this is normal. So, I thought if this is what 10th Gen owners here is experiencing the same.
Lately it's been -20 degrees (Celsius) here in Quebec, and when i start driving the car, as soon as i take a turn, i hear a clicking noise coming from the center part of my front, it doesn't sound like it's coming from my wheels at all. It doesn't matter if i turn left or right. The noise goes away after driving for 1 minute.
I took it to the dealer, but of course, they couldn't hear it because the car was warmed up, so I'm thinking of leaving it over night? I read that Civics and Corollas have thick Diff oil that cause this?
I bought a brand new 2013 Corolla S just 10 days ago. Everything seemed to be working great and I was really enjoying my car, until yesterday when we had a slight drizzle. I put my wipers into intermittent mode, and immediately noticed an audible "click" sound similar to that of the turn signals.
I was quite freaked out at first, so after parking my car I investigated a bit and found the noise was coming from the dash rather than from the wipers. After a few hours of digging around on the Internet, I'm 95% certain it's coming from the wiper relay, and that this is supposed to be "normal".
This is bugging the hell out of me, so my question is, if you can replace just the wiper relay, or would you have to replace the entire stalk/motor assembly? At this point I actually don't mind shelving out $200 if it means I can get some peace of mind, literally.
Which reminds me, if say you could get an OEM (or an ever better aftermarket) wiper relay, and you went to a mechanic to have it installed, would that void the warranty?
I understand there's variations and tolerances exist in manufacturing, but you'd think Toyota would've gotten something as simple as a wiper relay figured out! The 2013 Corolla S I rented for 3 months never had this issue, nor did my mom's 2005 Corolla, or my dad's 2011 RAV4. So why my car?
Have a question about a noise I hear. This is a click (three click only) that only seems to occur if the car has sat for around an hour or longer. When started and put into gear and it starts to move, there is a metallic click that occurs right after the car starts to move. It come from the front. I try the dealership but no luck.
View 2 RepliesIs it possible for the brakes to make some kind of noise when it's cold outside?
I've been noticing some kind of noise after a cold start, I'd drive the car a little bit then apply the brakes and it would just make this random noise coming from the front-right side of the car. It sounds like a grinding noise, but I can't really tell. It doesn't create an issue either, I'll let go of the steering wheel and the car doesn't drift in any direction at all, the noise appears but the car is slowing down properly.
The noise disappears though after the 1st time it happens, and would only reappear after you've turned the car off, parked it where it's cold and it would only appear after not using it for at least 2 hours. My dad already took it to the dealership and they said the brakes are perfectly fine.
I have problem with left front brakes corolla. When I changed the router it was fine, but after few month, during down hill when I apply brake, right side make lot of noise. I cleaned pads and pin are good. It happens only on right side, down hill is problem.
View 2 RepliesIf your experiencing a clicking noise coming from the lower right side of your driver seat, more noticeable over rough roads with pressure applied to the backrest, read on. After much trial and error troubleshooting, here's what worked for me.
I removed the tension on a small clock like spring located on the driver seat back right side pivot point. Since having done so, no more annoying clicking sound and I haven't noticed any difference or adverse side-effect in seat operation /adjustment. I've got photos....
I have a 2009 Corolla S and the symptoms are as follows:
1. Normal forward driving, brakes work fine (and as expected without sound).
2. In reverse, when I apply the brakes I hear a click (clunk) sound from the front brakes. It only makes the sound when I'm going from moving to stopping (IE: I cant just keep pressing the brake once stopped to generate the noise). But if I let myself continue in reverse and press pedal again, it will make the same sound (very repeatable). I don't need to go forward to replicate the sound, I can just stay in reverse, stop (CLICK), continue in reverse, stop (CLICK), etc.
3. The it's noticable in the pedal. I can feel it on the brake with my foot when the noise happens.
4. It happens when I depress the brake pedal about 1/4 down, a gentle stop. And usually happens every time when I back out of my driveway or parking spot.
5. GF's sister's 2009 corolla CE does NOT make this noise in reverse.
6. 20,000 miles, Orig tires/brakes, didn't happen 4ish months ago.
I plan on putting winter tires on next month. Perhaps I'll take a look at the pads to make sure they aren't moving around, but wouldn't I also hear the noise in forward motion? Or when I switch from forward to reverse?
I performed brake maintenance today with my brother on my 2010 corolla CE, my front rotors were warped and my pads were used ( and also uneven) and I replaced both front rotors and pads.
The install went smoothly, my brother changed a couple of brakes sets and knew what he was doing and showed me up.
Took it for a spin, the brakes work very nicely ( i bought the ceramic wagner bundle ) but theres a slight grinding noise when driving, like the pads are touching and rubbing a bit too much on the rotor, but the driving is unnafected. Also, there's a sqealing noise coming from either side when you turn only.
Braking itself produces no noise whatsoever, only when you turn that it squeals.
So originally I was told it was my front brakes going bad, which was the case. To address the issue, I replaced the rotors and pads awhile back and the noise disappeared for a bit. Fast forward a month or so ago and I hear an on-and-off squeaking noise when the brakes are applied. It does not happen every time. Usually when I ease onto the brakes to a slow stop.
Figuring it could be my pads going bad for whatever reason, I decided to check my brake pads and rotors again. No odd signs of damage on the rotors and by the looks of it there was still plenty of pad left. I then sprayed some brake clean assuming it could be dust but there wasn't much.
I have not touched the drums yet but I'm thinking it could possibly be the drums or a bad bearing? The car is a 2012 with 38k miles which is the reason I'm doubtful of it being a bad wheel bearing. What could it be?
I just bought a used 2009 corolla, turns out a few weeks in, I am getting the infamous water pump/ac compressor clicking noise from the drive belt area.
View 3 RepliesWell this week, everytime I was backing up, hit a pothole or sometimes when I turn either left or right or hit the brakes a clunky or sometimes metallic sound appears coming from the back the undercarriage.
First I thought may be one of the bars (TRD or the Ultraracing sway bars) were loose, we lift, checked the car with the guy who installed the bars and all of them were tight ,nothing loose, we discovered on the front is time to change the bushings of the front stabilizer bar and also the rods who run parallel to the shocks absorbers but we couldn't mimic the sound the shocks are fine.
Tonight my daughter was driving the vehicle so I have a chance to hear the clunky noise, which I think is coming directly from the inside of the drums the sounds intensified at the time of hitting the brakes but is not all the time you hit the brake when it happened.
Also I can't explained why I heard the sound when I turn left or right and still coming from the back, doesn't make sense I can't find no relation whatsoever
I just add this 2 videos..
[URL] ...
[URL] ....
My light when off on my Automatic Shifter Selector Panel (View Attach Pic) on my 2013 Corolla S. I hate turning on my interior lights just to see if I'm in reverse or neutral.
View 3 RepliesThe radio trim/bezels around the center console and down to the shifter tend to be noisy when its hot outside and the car driven over rough roads. How to insulate these radio bezels with felt or some kind of insulation so the noise is dampened? I think any rough road tends to make them creak and the hooks tend to rub against the plastic..
View 5 RepliesOur 2009 Corolla S 5-spd is making a ticking sound like a CV joint is out, but the boots are fine, and the sound is only consistent when there's three fat people in it. With just me driving, I can hear it, but it's just an occasional pop when turning, nothing like the very consistent and recognizable click-click-click noise of a dying CV axle, which is exactly what it does when there's weight.
View 6 RepliesI have this clicking sound from the gear of my car every time i step on the brakes, is it normal or do i have something to worry about...
View 1 RepliesDon't the stock brake pads go for more than 12k miles? The brakes are squeaking when I first pull out of my driveway and after a while it goes away, but at lower speeds (stop and go traffic) they still squeal a little bit, but when I am braking at higher speeds I don't hear anything. about a year ago my friend drove my car with the E-Brake up for about a mile. Could it be that because my rear drums are worn that my front brakes are getting worked more? But when I pull my E-brake up it still works fine without going up too much.
View 7 RepliesMy 2010 toyota corolla LE headliner makes a clicking sound in the back. This usually happens when I go over a rough road.
View 4 RepliesI just bought a new corolla a few weeks ago, (Build Date April 2012), so far the car is great except for one issue.
I've noticed when pulling out parking spaces the steering column makes a clicking noise. It sounds more like a plastic noise. My last car had to have intermediate steering shaft lubed every 40k (Pontiac) but it was more of a "clunk" sound. This is more plastic on plastic noise however this appears to be only when the wheel is about 1/2 turn from the "end" or all the way left, or all the way right.
I am trying to figure out if this is a "normal" sound or if something was not put together right. Here is a video .....
I bought my 06 Corolla LE last week and just started hearing a nasty squeaking sound whenever I applied the brakes. I took it to the dealer today and 4 hours later he calls me and tells me that he had to readjust my back brakes and lube them up and it should be fine..About a half hour into driving the car around town I start hearing this noise again. Now he's telling me to bring back in the morning to see what the issue is.
My question is besides the brake pads and rotors which were checked by another mechanic that said they were good what the hell could be the issue?
I bought a 2012 Corolla S and I feel that the rear brakes are a little cheap. Has swapping brakes but how?
View 3 Replies