Corolla / Matrix 2009-13 :: Front Brakes Click / Clunk Noise When In Reverse?
Oct 18, 2010
I have a 2009 Corolla S and the symptoms are as follows:
1. Normal forward driving, brakes work fine (and as expected without sound).
2. In reverse, when I apply the brakes I hear a click (clunk) sound from the front brakes. It only makes the sound when I'm going from moving to stopping (IE: I cant just keep pressing the brake once stopped to generate the noise). But if I let myself continue in reverse and press pedal again, it will make the same sound (very repeatable). I don't need to go forward to replicate the sound, I can just stay in reverse, stop (CLICK), continue in reverse, stop (CLICK), etc.
3. The it's noticable in the pedal. I can feel it on the brake with my foot when the noise happens.
4. It happens when I depress the brake pedal about 1/4 down, a gentle stop. And usually happens every time when I back out of my driveway or parking spot.
5. GF's sister's 2009 corolla CE does NOT make this noise in reverse.
6. 20,000 miles, Orig tires/brakes, didn't happen 4ish months ago.
I plan on putting winter tires on next month. Perhaps I'll take a look at the pads to make sure they aren't moving around, but wouldn't I also hear the noise in forward motion? Or when I switch from forward to reverse?
View 13 Replies
Advertisement
There Is a click in my front wheels that is audible as I slow down. What is going on. nothing else is wrong with the car. I have a 2013 corolla le....
View 3 Replies
Our 2010 LE has been making a noise while steering. When you steer it left and right, it clicks. Regardless of whether the vehicle is moving or not, it still clicks. It sounds like its coming from under the upper steering column cover behind the steering wheel.
View 1 Replies
I have a 2010 Model S that has 38,000 miles on it. I am hearing a rattling in the front brakes when cruising along at almost all speeds. If i hold a little peddle pressure it goes away. Sounds like the pads are rattling to me. I am running the stock pads with about 45 to 50% remaining on them.
View 6 Replies
Is it possible for the brakes to make some kind of noise when it's cold outside?
I've been noticing some kind of noise after a cold start, I'd drive the car a little bit then apply the brakes and it would just make this random noise coming from the front-right side of the car. It sounds like a grinding noise, but I can't really tell. It doesn't create an issue either, I'll let go of the steering wheel and the car doesn't drift in any direction at all, the noise appears but the car is slowing down properly.
The noise disappears though after the 1st time it happens, and would only reappear after you've turned the car off, parked it where it's cold and it would only appear after not using it for at least 2 hours. My dad already took it to the dealership and they said the brakes are perfectly fine.
View 14 Replies
I have problem with left front brakes corolla. When I changed the router it was fine, but after few month, during down hill when I apply brake, right side make lot of noise. I cleaned pads and pin are good. It happens only on right side, down hill is problem.
View 2 Replies
My son just bought a 09 Corolla LE and he gets this clicking noise every time the brakes are applied. The clicking noise comes from the Shifter.
I know that about the Shift Lock Solenoid, but this clicking sound is loud. I have been told that this is normal. So, I thought if this is what 10th Gen owners here is experiencing the same.
View 1 Replies
I performed brake maintenance today with my brother on my 2010 corolla CE, my front rotors were warped and my pads were used ( and also uneven) and I replaced both front rotors and pads.
The install went smoothly, my brother changed a couple of brakes sets and knew what he was doing and showed me up.
Took it for a spin, the brakes work very nicely ( i bought the ceramic wagner bundle ) but theres a slight grinding noise when driving, like the pads are touching and rubbing a bit too much on the rotor, but the driving is unnafected. Also, there's a sqealing noise coming from either side when you turn only.
Braking itself produces no noise whatsoever, only when you turn that it squeals.
View 4 Replies
So originally I was told it was my front brakes going bad, which was the case. To address the issue, I replaced the rotors and pads awhile back and the noise disappeared for a bit. Fast forward a month or so ago and I hear an on-and-off squeaking noise when the brakes are applied. It does not happen every time. Usually when I ease onto the brakes to a slow stop.
Figuring it could be my pads going bad for whatever reason, I decided to check my brake pads and rotors again. No odd signs of damage on the rotors and by the looks of it there was still plenty of pad left. I then sprayed some brake clean assuming it could be dust but there wasn't much.
I have not touched the drums yet but I'm thinking it could possibly be the drums or a bad bearing? The car is a 2012 with 38k miles which is the reason I'm doubtful of it being a bad wheel bearing. What could it be?
View 7 Replies
Well this week, everytime I was backing up, hit a pothole or sometimes when I turn either left or right or hit the brakes a clunky or sometimes metallic sound appears coming from the back the undercarriage.
First I thought may be one of the bars (TRD or the Ultraracing sway bars) were loose, we lift, checked the car with the guy who installed the bars and all of them were tight ,nothing loose, we discovered on the front is time to change the bushings of the front stabilizer bar and also the rods who run parallel to the shocks absorbers but we couldn't mimic the sound the shocks are fine.
Tonight my daughter was driving the vehicle so I have a chance to hear the clunky noise, which I think is coming directly from the inside of the drums the sounds intensified at the time of hitting the brakes but is not all the time you hit the brake when it happened.
Also I can't explained why I heard the sound when I turn left or right and still coming from the back, doesn't make sense I can't find no relation whatsoever
I just add this 2 videos..
[URL] ...
[URL] ....
View 4 Replies
Have a click when the clutch engages? Manual transmission.
Everytime is release the clutch, I hear the clutch click when it grabs. It's not the pedal that clicks. It's inside the transmission.
It runs fine, and it's been doing it right off the lot. It's not that loud to actually bother me, I'm just wondering if its normal.
View 5 Replies
I have a click/clunk in my front brakes, passenger side. Happens mostly braking and turning right into my driveway. It was recently attributed to a strut bearing, but this was not the case, and their replacement didn't fix the problem.
Dealer has said it's a common noise and occurs after service. The only way to stop the noise is to stop lubing the calipers so they drag.
I say they are full of crap. This has now been going on at least 30k km. I have documented it on every oil change that I can remember (always at the dealer). Any way I should be handling it?
View 10 Replies
I bought a new 2012 corolla a month ago and when the wiper is on the intermittent mode, the wipers make a click sound before it moves and then another click sound after it moves. I still can hear it half of the time with music on (only when the music Is quieter.
I listened to my friend's 2010 corolla and his car had a very faint click. I drove many other cars before and never had this sound. Is this a known sound for corolla?
View 14 Replies
So my passenger front door is vibrating inside somewhere ... tho' it could be the door panel itself possibly !?
I've removed the door panel hoping to find something loose inside that is causing this buzzing. All the door panel's locating pins are intact and secure the panel as they should. In other words... The door panel secures as it should and nothing looks broken at it's attachment points.
The noise does not occur on a smooth road surface...and only occurs on rougher road. So I realize the vibration is being transmitted by road vibrations.
I can hear/feel a lite jolt from the tire's contact with the road's surface irregularities and if the road surface remains consistently rough ... that jolt turns into a buzzing drone type noise. Well ... at least until I hit a smooth road surface again. Then the buzzing subsides. No, it is not an electrical buzz/noise.
Sounds more like plastic vibrating against the door's inner surface... But I don't see a scuff mark or anything giving me a clue as to what it could be !?
I've thought of removing the door panel...then take a test drive without it installed. Just to be sure it is not the the window glass support/channels... door lock/lever mech. rod or loose wiring. But haven't done that as of yet. With the door panel removed... I don't see anything that looks loose or could be causing this rattle/buzzing noise ?
It's difficult to say exactly where this noise is transmitted from... but if I were to guess... I have to think it's possibly near center... around the arm rest area. I see behind that is only some wires coming from the window control unit. But I don't see how those could be culprit of this buzzing noise ?
My '10 is still under the 36K warranty...
View 8 Replies
We have a 2009 Matrix, 68000 miles. automatic transmission has a loud clunk when down shifting on a hill. Has only happened a few times and cant seem to make it happen. Am really concerned what this might be.
View 5 Replies
I have a 2009 Toyota Corolla and it's making a loud grinding metallic noise on the front left side. It does it while I drive the faster I go the louder it gets. When I turn to the left it makes it louder, when I turn right the noise decreases. PG&E have been breaking the roads by where I live and there's a lot of little rocks I drive thru. I'm wondering if that's the problem?? What do I do?
View 4 Replies
Just bought a used 09 Corolla LE with 89K miles on it. I noticed a subtle rough idle when I come to a stop light and especially noticeable when in reverse. Here are the things I've tried so far:
- TB and fuel system cleaned at Instant Valvoline
- Cleaned the MAF sensor with a MAF sensor cleaner
- Replaced the spark plugs with OEM plugs
- Replaced air filter
- New water pump
- Bled the coolant system
I also took it to the dealership and had them checked the PCV and the timing chain tensioner replaced. And of course their response was they couldn't replicate the problem. They also said if there's anything wrong with the O2 sensors, the IAC or the TB system, it will throw an error code. So they basically charged me about $100 to tell me there's nothing they could do and just put up with it until the check engine light come on.
View 14 Replies
I've noticed an intermittent clunk which occurs when engaging the hydraulics brakes during reverse maneuvers. It happens with anything from very light to very heavy brake force and typically will happen before driving very far (backing out of driveway, out of parking spot, etc) but does not happen after driving (backing INTO driveway or parking spot). This has been occurring for a while now with no other symptoms (other than some shudder during take off which I attribute to a sloppy transmission bushing).
Front brakes were in great shape when I r&r them a while back to turn the rotors, didn't pull the rears apart but they look good, and I don't have any brake vibrations or issues when moving forward. I can't rule out a driveline clunk or suspension clunk either but the u-joints don't have any slop in them and no squirrely handling issues either.
View 5 Replies
So I have a 2010 corolla s with 30k miles. I replaced my rotors and pads about 2 weeks ago to get rid of this problem. The problem was gone for a week and now it's back. I get tons of squealing and screeching when I brake in reverse.
View 5 Replies
I bought a DVD player for my 2010 corolla,everything is ok the only problem is I can't see reverse image automatically when I reverse my car.
View 4 Replies
Don't the stock brake pads go for more than 12k miles? The brakes are squeaking when I first pull out of my driveway and after a while it goes away, but at lower speeds (stop and go traffic) they still squeal a little bit, but when I am braking at higher speeds I don't hear anything. about a year ago my friend drove my car with the E-Brake up for about a mile. Could it be that because my rear drums are worn that my front brakes are getting worked more? But when I pull my E-brake up it still works fine without going up too much.
View 7 Replies
