Ford 6.0L Power Stroke Diesel :: Mishimoto Radiator And Hoses Leaking
Nov 1, 2016
In April I replaced the radiator, hoses, water pump and Tstat. I used Mishimoto for the radiator and hoses (silicon). I am having trouble with the hoses leaking where they clamp to the radiator. I put 2 on the lower hose and that seemed to work. No other signs of leak on than drip from the top hose - factory clamp is on and tight as I can turn it - still lost a gallon in 2-3mo. Should I just get a new clamp? OEM stuff was not this prone to leaking ....
View 14 Replies
Advertisement
, 211,000 miles and the third radiator that was put in this truck is leaking!! Has there been a recall This is not right. I haven't even had the truck five years and this will be over 5 grand in radiators. Is a person suppose to budget an extra grand a year if they want to own a ford diesel?
View 14 Replies
Read that this is a common issue, leaking out crimped seam on lower LH (2012 F250 King Ranch). I have called Ford customer service twice, they said "we do not have any recall or programs to cover the out of warranty repair". I keep adding coolant and thinking eventually Ford will address this problem. They did cover my bad EGT sensor....
View 9 Replies
Recently turned 100k and since have had my exhaust RTD's go out. While fixing that they found the back radiator leaking. Since then both batteries died which didn't surprise me at 40 months. Then my windshield washer started leaking, then my DEF heater went out and two days ago my AC quit. I was ready to buy a new 2015 but now not sure. I've contacted Ford customer service and they are getting with the dealer to see what they may cover but haven't heard anything back yet.
Mine is a 2011 with 105,000 on it. This is pretty frustrating. I have been very pleased with this truck up until now it has been very dependable. However when that dependability begins to go south at only 100k it brings to question what exactly are we paying for here? A heavy duty truck that costs upward of 60k should be one you can count on for a lot longer than that. How Ford approaches this with me is definitely going to have a direct bearing on which 2015 diesel truck is in my driveway in the next few months. Again let me say that i have been very pleased with this truck and FOMOCO in general.
View 11 Replies
Ok I now have the dreaded leaking radiator on my 2011. I am wondering how the aftermarket radiators are holding up? I was talking with my local radiator repair shop and they have been repairing the oe radiator with good results. They also claim that they have repaired some aftermarket radiators. He did not mention any brand names so I can not make any claims against them. I am considering a mishimoto replacement.
View 14 Replies
After chasing the smell of coolant for a couple weeks, discovered that the upper radiator hose was leaking at the engine. Based on my schedule and drive schedule, and unfamiliar location this last week, I took my truck to the last people I wanted to - the Ford dealer, where they attempted to charge for the hose replacement. During this time I discovered the nature of how these hoses work and asked the tech why they don't just replace the O-rings ... "Ford Motor Company wants to sell you a new hose with labor" - a direct quote from the Ford tech. And that is why Ford is the LAST place I want to go for repairs I cannot perform. I kept the old hose - any spot where you can get the O-rings alone?
View 5 Replies
On Friday am I noticed a 6" sized puddle on the garage floor. Coolant leak on the drivers side coming off the frame. Dropped it off at the dealer on Sunday and today the tech tells me it was in fact a radiator leak and the new one will be here wed. They hope to have it buttoned late Wednesday. I am assuming all will be covered under warranty.
I have 23k miles logged and had just got home from a 1300 mile run pulling about 18k worth of hay and trailer. Truck performed flawlessly. Averaged 11mpg for the trip. I am hoping this is the first and last radiator replacement I have to go thru.
View 14 Replies
I just recently repaired issues with my 6.0 and now new issues has begun. The turbo keeps blowing the pipes out of the rubber hoses. Not sure what is happening or why so a little insight would be useful.
Oh yeah out of all the work completed in my previous post..don't bother replacing the solenoid section of the injectors. I replaced two the bad ones, rebuilt the other 6 with new everything including a cleaning and now I am getting codes for 3 that are going bad. Oh well I tried right...
View 14 Replies
I have a 99.5 with 400,000. on the engine. It has been a great truck but it is time for the some TLC. I have a little leak on the radiator and the water pump and would like to replace it. I am just looking for stock.
I have a 13 yr old that grew up sitting on my lap as we drove the dirt roads around the house and on the ranch. He has been driving this truck by himself (on the ranch) as soon as he was able to reach the pedals, around 8 or 9. His happiest day will be when he gets his drivers license and can drive the truck to school. So I have a lot of work ahead of me on this truck.
View 4 Replies
I thought I remember a posting about removing the radiator to do the cooler because it made it easier to work standing in the engine bay with the engine in front of you instead of leaning over and removing everything from outside ? I'm getting ready to do my 4th external oil cooler? And is it difficult to remove radiator, and/or worth removing it ?
View 14 Replies
I was just outside and noticed a little puddle under the front of the truck. I crowled under her to find orange coolant on the seam of the radiater right above the drain. I thought maybe the drain was open a little but no, it was tight. I have 40000 miles on the truck.
View 14 Replies
How many of you put a screen in front of all your radiators to keep bugs and stuff from clogging them up? Is there much of an air flow restriction (from the screen)? It is about the first thing I always do when I get a new vehicle.
View 5 Replies
I guess one of the hoses dried out and the fluid is leaking.
Called the dealer to buy a new one but guess what.. They don't sell that hose separate. Only the assembly with the metal line and the price for the whole thing is over $90 + tax .
Red arrow shows the hose that I need and the part number for what dealer sells is 44406
I cleaned everything today and put an extra clamp where the hose is connected to the PS reservoir. Will see if it's going to work for now.
My question is where can I get a piece of hose which will be compatible with PS fluid so I can replace this? Also what is the ID of that hose?
View 7 Replies
I am in the middle of a several thousand mile road trip, and I am with family in Utah when this evening I noticed a puddle under my 6.0 Excursion.
Coolant leak? - YouTube
The fluid does not smell like typical coolant, but from the location of the drip, I cant think of it being anything else.
View 14 Replies
Removing the radiator on these trucks to repair the leak? It looks pretty straight forward. Remove the fluid, grill, hoses, and the few screws on each side that connect the other cooling coils to the main radiator. then hopefully it should slide straight up and out. A radiator shop said they would replace the gasket between the plastic end caps and the radiator if I take it to them. Which brings me to my next question. Is it the gasket that is causing this notorious leak or is it a crack somewhere or a loose crimp? Mine is leaking from the usual spot. Driver side on the bottom at the seam. Then runs down the frame to the ground.
View 6 Replies
I drive a 2002 Ford Ranger and am wondering at what mileage should I change the heater and radiator hoses. The truck lives in Phoenix, AZ and is driven almost daily.
View 5 Replies
Noticed this past month on colder days my upper hose is collapsed, typically a symptom of a bad radiator pressure cap.
This hose is connected from the water pump to the radiator. The radiator is connected to the Degas bottle which has a nonstandard radiator cap.
Do these plastic caps vent the same way a typical cap does?
Cap for 2011 Ford F-350 Super Duty|9C3Z-8101-B
View 3 Replies
This weekend while towing a light load I noticed my FWT and EOT starting to climb rapidly, EOT reached 260 FWT I think about 240. I exited the interstate to find I had a busted radiator hose. I replaced the hose and filled the system with distilled water, but didn't add antifreeze at this time. The system wasn't completely empty.
I noticed once back on the road my EOT seemed to be higher than normal but FWT seemed to be normal. Could the lack of antifreeze cause a greater delta between FWT and EOT? I have seen articles which state do not use Ford Premium Gold Coolant, but to use CAT EL-1 coolant instead. Which should I use?
View 6 Replies
On my 92 Aero 4.0L with A/C, I need to replace the radiator but I am not sure how to move the A/C hoses out of the way to extract the shroud and the radiator.
I have viewed a video where a guy said to remove the serpentine belt and then unbolt the A/C compressor and move the compressor and hoses out of the way. Hope this means that I don't have to discharge or disconnect AC hoses. Not good for me.....
Well, the video instruction seems simple enough......but there doesn't appear to be enough "play" in the AC hoses to move them far enough to extract the radiator, and not being an AC guy (and the potential danger of releasing freon), I am at a loss.
How to move the AC hoses out of the way (without disconnecting the hoses or discharging the system) ....
Not to mention it would be great to find out what the torque specification is for tightening the AC compressor bolts for proper reassembly. And being the backyard mechanic I am, any drawings, details or diagrams that you can provide would be very useful.
BTW, I have looked in the forum for radiator removal information and none of the threads I read addressed moving the AC hoses (which of course run right over the top of the dang radiator).
If I get past these "hoses" I will also take advantage of the radiator removal to replace the fan and fan clutch and thermostat while I am there, but first things first, if you know what I mean.
View 14 Replies
Looks like now the radiator in starting to seep a little between the core and the plastic sides. Couple questions. Whats the best replacement that wont cost a ton. Would this have anything to do with the intermittent not starting when warm.
View 6 Replies
Just had to replace radiator at 38k on my 2012 SD. Now I have another leak at 41k. Looks like it's wherever the lower radiator hose leads. Kind of a weird junction. I don't think it's coming from above there, but not sure. It's the primary dgas bottle that was low. The radiator was covered under my ESP. We'll have to see what's up with this one. Been eying a denim blue SD at dealer, thinking this is going to talk me out of it though. Not especially happy right now.
View 3 Replies
