So I have a loose wire to my steering wheel controls. They don't light up anymore and when I smack the back of the wheel, they will light momentarily. Also, 2 of the radio buttons work intermittently. How do I access them?
View 8 RepliesI would like to add the stereo controls to my steering wheel. From what I gathered it can be done by just buying the buttons and the taking it to the stealership to flash the computer to get them to work? BTW This is on my 06 XLT Scab.
View 1 RepliesJust purchased this vehicle. The cruise control and radio controls On the steering wheel will not work. It has aftermarket stereo , not sure if wiring from that would affect cruise control as well as radio controls. Cruise light does not even light on dash. Clockspring? Radio wiring harness?
View 2 RepliesSeems mostly for DIY'rs. Would like to start taking care of this steering issue. Steering wheel turns about an inch in both directions before wheels start to turn . How do we tighten this up?
View 14 RepliesLooking for the wiring diagram for the steering wheel controls for the head unit, mainly which wire is volume. I bought a new head unit for my 04 f150 truck and cant find the wiring diagram online to figure it out. I know there are 3 separate connections.
1 main one for power, gnd, ant, speakers, etc..
1 for the subwoofer if your truck came with it which mine did.
1 for the steering wheel controls if your truck came with it which mine did.
I want to know what the different color wires are connected to on the steering wheel control connection. i have had no luck searching online for about an hour. I know I could buy an adapter but really only want the volume to work and figured if I could just tap into that one wire and connect it to my new head unit.
My Excursion only has 74000 miles and I just replaced the original shocks with Monroe Reflex and combined with my Goodyear Silent Armor tires was running beautifully. Then after a "deal" from Ford, I replaced the Goodyears with LTX-MS2's and had the alignment checked since my Goodyears did have a little cupping after 45000 miles. They also checked all the front end components and said that everything was in good shape! Upon driving it home, the Excursion steering was extremely loose and I was ready to return the tires and get new Silent Armors, but I figured that there probably was something screwy with the alignment that they just did. So I brought it back, test drove it with the tech at 75 mph and he decided he needed to recheck the alignment. After the realignment, it drove beautifully, but after reading the posts on various forums regarding the proper toe-in on the front, I am questioning whether the alignment is set properly?
After the 1st alignment (in degrees):
LF Camber .3; Caster 3.0; Toe .01
RF Camber -.2; Caster 3.2; Toe -.03
Total Toe -.03; Steer Ahead .02
LR Camber .1; Toe .12
RR Camber -.03; Toe .16
Total Toe .27; Thrust Angle -.02
After the Realignment (in degrees):
LF Camber .3; Caster 3.0; Toe -.03
RF Camber -.2; Caster 3.2; Toe -.04
Total Toe -.07; Steer Ahead 0.00
LR Camber .1; Toe .13
RR Camber -.3; Toe .18
Total Toe .31; Thrust Angle -.03
New to owning a 2005 Excursion Limited 4WD 6.0 Diesel 140k miles.
When I bought the Excursion I had to drive it about 200 miles back home and it was all over the place. The steering seems real loose and when I hit bumps or a large gust of wind comes along the Excursion is all over the road.
I took it to Ford to get an alignment the next day and they said I need new outer tie rods ends, upper & lower ball joints, front shocks, steering stabilizer, locking hubs.
After that I took it to my mechanic who said I did not really need all that stuff done but if I did it I should be set with the Excursion for a long time. I opted to do all of these suggestions because I will be doing a lot of traveling with my family and wanted the peace of mind that all is well. For shocks I put new front and rear bilstein shocks (nothing fancy, I think they were about $80 each, sales rep said they would provide a firmer ride for towing).
After that I took it to another Tire shop for an alignment, they complimented all the work done and said I just need to get used to the steering after coming from a 2014 Jeep Grand Cherokee. I took there word for it and headed on a 2k road trip.
I love the Excursion but once again it was all over the place. It seems worse around 65-70 mph, and I found going around 75-85 it would be a little bit easier of a drive until a Semi Truck would go by or I would get stuck in a lot of traffic or hit a lot of bumps.
At first I had a very firm grip on the wheel but quickly learned that a loose grip at around 4 & 8 o'clock on the wheel was best. I talked to a number of other Excursion owners who said there was very smooth and straight.
The way it drives right now does not seem safe.
So I just got my 2014, upgraded from a 2007, and one change that is bugging me is the steering wheel controls for the radio. In the old truck clicking the scan up/down buttons scanned to the next radio station, in the new truck it scans through the preset radio stations. I really don't like that. Can it be changed or am I stuck with it?
View 2 RepliesOrdered a 2015 f350 CCLB FX4 XLT 6.2 about 2 weeks ago.Tried to see if the control buttons on the steering wheel were lighted couldnt tell in the daylight.
View 5 RepliesI really would like to add steering wheel controls on my 2001 expedition. I only have cruise controls on there now, and don't want to add that little stick on remote thing... Anyway to possibly make dual use of the cruise control buttons already in place? All I really care about are volume controls anyway.
View 6 RepliesThis may sound petty, but I would like to have the radio controls on the left side of the steering wheel of my 2012, instead of the cruise control. I guess the main question is how the wire harness is set up. Do the wiring can be re-routed to accommodate the switch?
Also, I want to smooth out the ride a tad so as to lessen the amount of griping from from the passenger seat. What is acceptable in lowering the tire pressure to allow a better ride without compromising tire wear? The factory specs are 65 psi. My truck is a 2012 fx4 Lariat with the 6.7
I bought my truck as a 2012 base XLT model, with no Sync and no audio control buttons on the right-hand side of the steering wheel. Since then, I have retrofitted in the stock navigation / audio system, added the Sync module, and installed a new steering wheel which came with the proper audio / sync controls on the right-hand side.
After installing the steering wheel, all of the buttons on both the left and right sides light up properly at night, and the controls on the left side for cruise and the message center still work fine. I had the dealer reprogram the SCCM to the VIN of a 2011 Lariat truck which had nav. However, they told me they could not get the wheel controls to work and ended up reprogramming the SCCM back to my VIN.
I would really like to get this to work. In consulting with the company that set me up with the navi and Sync, they said there may be some module which acts as a gateway between the SCCM and the audio system, but not really sure which module that is. Could be the BCM or the instrument cluster.
I have a 2005 f350 lariat 6.0. My horn, cruise volume, heat and fan controls on the wheel are not working. The airbag light isn't on. I am thinking that it's the clock spring. The stereo controls were intermittent for a while so I think it's the clock spring. I just want to be sure. Anything I could check?
View 2 RepliesTrying setting up new controls in the steering wheel of a Prius? I have the "four" package so there's a blank spot on the right side where the radar cruise and lane assist controls would be, and I would kill to have the three driving mode buttons right there for easy switching while driving around town. Is that sort of thing even technically possible?
View 7 RepliesI'm looking to take off my steering wheel controls to wrap them. Do I just rip the horn cover off or pop them off? I'm worried about deploying air bags or are those thoughts unfounded?
View 2 RepliesI have a 10' F150 and the radio has frozen. It will turn on but only displays the compass, Ext Temp, and time. All three of those items flash every two to three seconds. The controls in the steering wheel and dashboard no longer work (volume, seek, media, voice control...).
Things I've tried that haven't worked:
1. Turning the radio off and on
2. Restarting the truck
3. Pulling any fuses associated with the radio in the sub fuse box not sure of the technical name).
The steering on my Ex isn't working like it should. At times it feels loose when cruising then feels tight when straightening back out after a turn... the wander is really bad...
My PS fluid is also turning into a muddy brown goo every 5k... I changed the PS pump this summer with a supposedly good used one...
What should I be looking at/checking for?
I have some big time slop in my steering wheel, and what started as a type of binding when turning sometimes, is now really sloppy - almost dangerous
Is this the intermediate steering shaft? I just want to be 100% sure that I get the right thing before I buy it, as it's a dealer only part.
The lights on the steering wheel controls are too dim? I find it hard to see them at night.
Any mod that brightens them up a bit (and creates a cooler look at the same time)???
Most will agree it would be nice if the steering wheel controls were brighter. There has to be a tech out there that knows where the light source comes from. ( Its not magic.) If its a bulb,can a brighter one be installed??
View 8 RepliesI was thinking fuse but left, right and "ok" work perfectly. leaves my MFD stuck ...
View 8 Replies