Ford F-150 - 1997-2003 :: 1999 - Idle Hangs When Push The Clutch In While Coming To A Stop
Oct 2, 2013
I have a 1999 f-150 4x4 4.6 5spd manual 180,000 miles on the clock. My question is, when coming to a stop i push the clutch in an the idle hangs at about twice what it should be until i come to a complete stop then it drops to normal. It's not like somethings sticking cause it will stay at the high idle as long as were rolling but as soon as the wheels stop turning it drops down.
View 2 Replies
Advertisement
In my 99 with a zf6 it seems like when I push the clutch to the floor it's not disengaging all the way. It has a newer valair clutch in it maybe 15000 miles on it. It's really hard to get the truck in reverse or first from a stop. If the truck is stopped and it's in reverse or first with the clutch to the floor it will move in that gear. Is there a adjustment on the clutch? I'm thinking no since its hydraulic....
View 14 Replies
I have a 97 F250, 4x4, 5.4 Triton with a bunch of mile on it. The problem I'm having is when first starting, the accelerator hangs up. Can't just push down slowly to start off - have to tap it to get it to free up. Problem doesn't seem to be with the pedal or cable - they move freely. What to look at or try?
View 1 Replies
I am pretty sure my pedal is going.. Today and last month it would just die from a dead stop push the pedal and no go, but truck idling fine. I cleaned it off a few weeks ago but now its back. push pedal in and out a few times and all is fine for a few weeks. Truck runs fine other than that. Does not throw a code, just trans light comes on because no movement I think, then it goes off as soon as i start to move along. I have a adjustable pedal assembly 2c3z-9f836-de 508.45 at white bear lake ford.
View 1 Replies
So when the car is idle i hear a weird rattle noise but when i push the clutch in the noise goes away.
View 5 Replies
I am having a problem with the clutch fan not coming on at high temps pulling a grade or flat. Replaced the clutch had the front of the radiator removed and all the debris blown out and replaced the thermostat. Still over heating and the fan comes on real late.
View 1 Replies
Have a noise coming from the serpentine area. Sometimes it's a bit of a chirping, other times it's almost like a solid grind.
I pulled the belt off and the idler pulley had a bit of play so I replaced that. The tensioner pulley felt fine. I'm suspecting the fan clutch, as the noise only appears after the clutch has disengaged the fan (although it could be this is just masking the other noise because I've got a heavy duty / loud fan clutch setup).
How can I be sure that the fan clutch is the culprit before replacing it?
View 1 Replies
I have an 01 f150 4.6 4x4 automatic with 90,000 miles. I have an erratic idle but it only happens when I am on the freeway well actually when I get off the freeway and stop. the idle will fluctuate between 750and then drop to 400 then back and forth til I get moving again. I replaced the IACV because it was doing the weird humming and vibrating the intake tube. The humming is gone but still idles funny as stated above.
View 4 Replies
I'm getting a CLUNK when coming to a stop with my truck.
If I shut off the overdrive while coming to a stop it doesn't do it. Or if I manually shift it down a gear.
I read on here it could be a U-joint or the yoke or something and maybe something needs greased.
Anyway I crawled under the truck and it looks like I need a special socket to remove the 4 bolts holding the driveshaft to the rear end.
What type of socket it this? No grease fittings on my U-joints. What's causing this CLUNK as well?
View 14 Replies
I've recently had problems with my truck running 97 f150 4.2L.The latest episode is it stalling when coming to a stop. It will start right back up, I've checked for codes and found none, I have changed the fuel and air filters and I have tested the fuel pressure.(I have a video of the test however I don't know how to upload it.) Key on engine off it pumps up to 30 immediately on the gauge. key on engine running gauge shows a steady 32. I am really at a loss for what to check next. I really need this truck dependable again ASAP my wife is scared to drive it.
View 11 Replies
2001 f150 supercrew 5.4 triton... Recently did a tune up plugs,coil packs,filters,belt the whole 9 yards. The truck starts fine accelerates great and cruises down the road great without missing a beat.
But every now and then when you stop at a light or park it begins to idle down to the point where it almost stalls. When it does this i usually stab the throttle and it revs right up without missing a beat and idles fine for a a while then same thing all over again.
Could this be the idle air control? Seems like something simple due to the fact it runs down the road and accelerates like a big dog.
View 9 Replies
I have a 1997 f250 2wd 8800lb with dual tanks with the 5.8l. Recently the truck will all of a sudden stop running, always at idle. I switch to the other tank and after 5 secs. of cranking it starts. Switch back to the front tank runs fine. Same thing happens the next day, 3 consecutive days now. Is this something I can fix at home or do I need to get the truck to a shop.
View 1 Replies
I have a 2000 f150 with 210000 miles. The truck wants to stall when coming to a stop. I have noticed this from a higher speed and more when at operating temp. The truck runs great and idles at a stop great, but when coming to the stop the rpms drop to300 or so then it catches itself and revs up. I have cleaned the maf sensor the iac and checked throttle body all seem to be in working order and no obvious vacuum leaks.
My power steering pump is going and it's time to change plugs, but don't believe these would only effect the truck at braking. Have heard maybe torque converter is stuck this does make sense cause usually happens after getting out of first gear. Would changing the fluid solve this or should i look at sensors? Fluid starting to turn slight brown probably been in there 80000 miles.
View 3 Replies
I have a weird problem that just started concurring. When you approach a stop and the vehicle is almost at 1 or 2 MPH, the pedal pulses and I can hear the ABS buzzing. None of the wheels are slipping, and all my tires are of the correct size & pressure. There is no ABS codes at all. There is no ABS light on either. How can I diagnose? 2004 Heritage.....
View 2 Replies
Well, I think my clutch is falling apart. I am hearing an intermittent nasty noise coming from somewhere in the bell housing/oil pan area. It comes and goes, but seems to be more frequent lately. It sounds like a dryer that somebody threw a pair of sneakers and some rocks in; with a metallic clunking noise of something being "churned" around. As I said, sounds almost exactly like the dryer thing.
The clutch does not seem to be slipping, but I do occasionally have difficulty getting it into gear at a stop. I'm guessing that the clutch disc has thrown a hub spring, and its rattling around in the bell housing. Assuming I need a clutch; which I think I do, I need selecting one. I have no history on the clutch or flywheel, so I will assume that I need a new flywheel to match whatever clutch I get.
I can't get a stock replacement, due to the injectors/chip/etc.... I would estimate I am making about 350hp/700ft-lbs. I don't tow currently, but I may pull a car trailer in the future. I DO haul heavy loads in the bed (4,000lbs) on a regular basis. I also drive/shift aggressively, as well as shifting quickly. While I spend a decent amount of time on the highway, I also do a lot of stop and go stuck in traffic driving; so smooth engagement is important. So, no ceramic/ceramic in/out type clutches.
I do NOT want a South Bend. I don't want a super soft pedal. Also, the whole pedal-sticking-to-the-floor thing they mention is unacceptable. Personally, I think they should be ashamed of themselves for putting out a product with such an obvious unsafe design/engineering flaw, and then try to explain it away as "normal". Nope. They need to go back to the drawing board and fix that. As I said, it constitutes a serious safety hazard.
View 14 Replies
Its freaking hot! Only getting about 65 degrees out of the vents at best. If I start up and let idle the a/c clutch goes on and off but not after i rev up the engine or drive a little ways . plenty of freon, and the air gap is tight with .020 and .021 feeler gauge. Should I still pull one of the shims? or is it something else? Last summer the truck was like a meat locker. I did have to add some freon about 6 weeks ago but seems to be holding ok...
View 14 Replies
I have a 1997 F250LD 4WD. I was driving and came to a stop light. I hit the brakes and the pedal was rock hard with what seemed to be very little travel. I pushed hard to get to a stop and the abs activated and I came to a slow stop. This has happened about 3 times over the last 1000 miles of driving. I see no ABS or Engine lights. Most of the time the brakes are normal. Pads are fine, fluid is fine. Brake booster seems to work fine, pedal is not mushy or hard to press other than the 3 or so times this has happened. Once this happens I can let off the brake and everything is normal. I have not found any vacuum leaks.
View 6 Replies
What type of fan clutch silicone fluid is used in case you need to replace some during removal?(99 ford f150 5.4 vin L)
View 5 Replies
I have a '99 f150 singlecab xl sport 4.2 2wd 5spd with 139,xxx miles on her. Shes's a good truck, but second gear is shot, I can only get into it by double clutching, and that only sometimes works. I have a couple questions, the first one being what do yall think the problem is. To me and my friends it seems like the syncro mesh. Second, if it is something major, is it even worth saving the truck? I know she isn't worth a ton but I hate to go through the hassle of selling and buying a car.
View 1 Replies
2 questions regarding our 2001 F150 Supercrew. My 2 questions are:
My 2001 Ford F150 Supercrew (5.4L, 230,000 miles)has the check engine light on with the code reader telling me that it is the P0174. The truck would run rough when cold (usually in the mornings) and sometimes it would get close to stalling out when coming to a stop light. So we would quickly put it in park and give it some gas to rev it up a bit. After the truck gets warmed up, it runs great with no hint of the rough idle. Since this all started I have changed out the PCV valve and replaced the PCV hose (including the elbow). I have also replaced the Idle Air Control unit but that didn't really make a difference.
We then experienced a cylinder #4 misfire which we resolved by changing out the cop with a new Motorcraft unit. The misfire went away but we still had the problem of running rough at idle to the point of stalling out at stops when the engine is cold. A few weeks ago we cleaned the MAF sensor and that seemed to work. The truck doesn't run as rough now (when cold) at stop-lights, but occasionally it will still have the loping idle. We cleared the check engine code and it stayed off for about a week before returning.
I don't know what else to check other than trying to see if there is some type of vacuum leak, but I don't have access to a smoke machine nor would I know how or where to hook one up. Removing and cleaning the throttle body would work? What could be causing the trouble, or what I should do to further isolate or troubleshoot the problem? I saw a you-tube video on the F150 intake manifold gasket possibly being the problem and although I hope that isn't the trouble with my truck, if it is then I will have to deal with it. We need the truck to get to work and the car is now due for a registration renewal, but we can't get a California smog certificate with the check engine light on.
View 3 Replies
How can I determine if my compressor is bad or is the solinoid/clutch bad. Truck had sat for about 9 months-1yr. A/C hadn't been operated for an additional 5-6 months. It worked like a freezer before I parked the truck. When i started the truck back up and tried the a/c the clutch would try to spin but very intermittently, now not at all. What direction should I go?
View 9 Replies
